How to change fishing line on a petrol trimmer Khutor

How to wind the fishing line correctly in a trimmer, and what to do if the fishing line quickly gets used up or breaks off

The trimmer is the most common unit used for cutting grass and cutting small bushes. This device is distinguished by its ease of maintenance, simple operation during operation, and thanks to its low weight, even women can handle it.

It is no secret that in order to perform high-quality grass mowing work, the correct selection of cutting tools is required. As a last resort, trimmers use special cutting attachments (discs, knives) or trimmer heads with fishing line inside.

Attachments and fishing line are consumable tools, but if the knives can be sharpened, then when the fishing line is used up, it needs to be replaced. In this article we will tell you in as much detail as possible how to properly replace the fishing line.

Cord breaks

If the fishing line often breaks, this may be due to the following reasons:

there are stones, small branches and other solid obstacles in the grass;
the user mows the grass close to the fence, and if it is mesh, then this breaks off the “tendrils” even faster;
poor quality cord (it is recommended to purchase a quality one);
The outlet holes in the mowing head are worn out, causing the line to rub against the sharp edges of the bushings and break off (a complete replacement of the part will be required).

Replacing fishing line in a trimmer: 2 simple ways

A trimmer is a necessary and useful tool for a summer cottage and a private home. Many people own and actively use it, but not everyone knows how to replace the line in a trimmer, especially at first.

In this instruction we will walk you through the entire replacement process step by step. Looking ahead, there are two ways to thread a trimmer spool with line. There is no fundamental difference - the difference is that in the first case there will be one line folded in half, and in the second there will be two sections of such lines.

Content:

How to wind fishing line on a trimmer correctly

A garden trimmer is a useful tool that makes life much easier for any gardener or private home owner. The grass just rushes in the summer, especially after the rains, so you can’t live without it. But over time, sooner or later, the line in it will run out, and it will be necessary to insert a replacement skein of new line. Some summer residents find themselves at a dead end - how to do it themselves? So our article will help them.

Changing the line on the trimmer

This article can tell you how to change the fishing line on a trimmer . For some people, this work may not be easy. But the step-by-step instructions that are available here will help you in this matter.

So, the first thing to do is remove the gearbox cover. We combine the hole on the side of the shaped bottom washer and the axial recess, insert a screwdriver to secure the shaft from twisting. Now unscrew the nozzle. The thread on the shaft, as a rule, has a reverse cut, keep this in mind when unscrewing.

Next comes disassembling the nozzle. There the cover is secured with clamps through the holes. So you just need to press these clips into the holes and the cover will come off. If the nozzle has automatic/semi-automatic line feeding modes, it means there is a spring inside that can simply fly out when you open the lid, be prepared for this. We lay out all the removed parts carefully in order.

READ How to Thread Line into a Stihl Trimmer

Now it’s time to take the fishing line and unwind 5 meters from it, cut off this piece. Pay attention to its thickness; you should not wind a fishing line thicker than that specified in the manual for the tool around the unit. Otherwise, you will get an increased load on the engine and greater fuel consumption during operation. We bend the measured fishing line in half to find the middle and get a loop.

HOW TO CHANGE THE LINE ON A TRIMMER, Very Easy

In the middle of the coil there are a couple of notches, sometimes these are not notches, but holes located opposite each other. We cling to one of the notches with a loop and wind the fishing line counterclockwise. If the reel has 2 compartments, then we wind each end of the fishing line onto them separately. We leave the last 15-20 cm free and clamp them while in the recesses of the coil.

We reassemble the device, pulling the free ends of the fishing line into the holes on the body. We put on the lid by snapping the latches into their grooves. Now you can pull out these loose ends of the fishing line.

All that remains is to attach the working unit in place, as in the first point. Don't forget about reverse rotation when screwing.

Now you can learn how to wind fishing line on a trimmer. Actually, the whole process was described in detail above. No labor-intensive operations requiring the presence of specialists. Your brushcutter is ready to go again.

Tips and tricks on how to wind a fishing line and what you need to know

There are several useful tips and tricks that will be useful to know not only for beginners, but also for experienced mowers. These tips will help prevent negative consequences in the form of injuries and improper functioning of the mechanism. These recommendations state the following:

Install the cover until it clicks. Moreover, this is 2 or more clicks, which depends on the number of latches. If one latch does not latch, the drum may jump out when starting the tool and injure a person.
Do not wind the fishing line with too much tension, or in more quantities than can be inserted into place. It is better not to rewind the equipment than to have more of it, as this will lead to negative consequences in the form of the impossibility of unwinding it if necessary
If you own a tool not with two fishing line outputs, but with one (usually these are low-power units), then the winding process is performed in a similar sequence as described above, only with the difference in the absence of a middle side between the extreme bases of the reel
After replacing the material, you must first check the functionality of the tool, and only then start mowing the grass. If a preliminary check is not made, the scaffolding may unwind and injure a person.

This is interesting!
Choose material of appropriate quality to avoid injury when working with lawn mowers, trimmers and brush cutters.
During the process of mowing grass, small stones and other materials fall under the rotating parts, which can fly long distances; therefore, despite the fact that the fishing line is not a knife, work with the tool should be carried out in special protective clothing. The result of the work done is as follows - after the replacement, the new material is enough for an area of up to 600 square meters, but taking into account the presence of a reinforcing layer on the fishing line. Conventional nylon materials last less, which is important to consider when working. Do not try to mow thick-stemmed grass with a fishing line, as there are special metal discs or blades for this purpose.

Automatic winding of line onto reel

There is a type of reel in which an automatic mechanism produces winding on its own - the user only needs to thread the line correctly. The fishing line is passed through a hole on the inside of the body, its tendrils are threaded through the hole on the outer body without winding, the bobbin is assembled, and when the winding button is rotated, the fishing line inside is wound on its own. In such a spool it is impossible to wind incorrectly: the mechanism itself will determine the correct direction, since it can only spin in one direction.

Reel with two working antennae

In this type of spool, you should determine the number of grooves for winding line lying on the inside of the reel:

one groove - both tendrils are wound together along one groove;
two grooves - each tendril is wound along an individual groove.

For both cases a fishing line 2-3 m long is taken. In single-groove reels the fishing line is pulled into a through hole, its ends (tendrils) are folded together and aligned, after which they are wound in the direction opposite to the direction of rotation of the reel on the rod - the inside arrow usually indicates the correct winding direction. If there are locking grooves, the ends of the fishing line are threaded into them or held with the fingers of your free hand, threaded through the through hole of the outer half of the reel, the spool is closed and attached to the trimmer rod.

Replacing fishing line on a brush cutter.

The difference between winding line in two-groove reels is that initially a piece of line 2-5 m long is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along their own groove; fixing the antennae and assembling the reel is similar to the option discussed above with one groove.

READ How to Remove the Clutch on a Lesnik 335 Trimmer

The first implementation of this procedure may seem lengthy and quite labor-intensive, but with time and experience this task will be solved much faster and easier.

The video below will clearly show how to thread the fishing line into the trimmer reel and wind it correctly - this operation is not difficult and, with some patience, will definitely be successful:

Line arrangement in the mower

The structure of the element on which the nylon thread is wound is very simple. This element is called a coil. It has two “tracks” - upper and lower. Between these tracks there is a special partition with a recess. A fishing line is wound around these tracks. It must first be pulled through the notch.

To be able to pull out the reel without any obstacles, you need to unscrew the special button located on the mower body.

Features of replacing fishing line on video.

How to properly wind the line on a trimmer: step-by-step guide and video instructions

A beautiful lawn will look truly well-groomed only if you mow the grass regularly. A trimmer is best for difficult areas. Any owner of a machine will sooner or later be faced with solving the problem of how to wind fishing line onto a reel, because incorrect actions can not only deteriorate the quality of mowing, but also damage the equipment. Today in the Homius review we will talk about all the methods and nuances of replacing fishing line and the features of choosing consumables.

By size

Before you wind the thread onto the trimmer spool, you should pay attention to its size. Most often, a fishing line with a cross section of 2 mm is used.

You can select the appropriate diameter in the following ways:

See the recommendations in the manufacturer's instructions for the trimmer.
Manufacturers often put information about the cross-section on the bobbin.
The cross-section of the cord must match the diameter of the bobbin hole.

Important! The thicker the thread is, the tougher the grass it can mow.

By quality

Before putting fishing line on the trimmer, you need to pay attention to the section of the cord:

threads with a round cross-section are the most common option. They perfectly mow the grass even in difficult areas;
A line with a spiral section is suitable for thin grass. It is not very durable and is not suitable for old thickets;
cord with notches and sharp edges is chosen for mowing weeds;
fishing line with various geometric sections will help to mow the lawn more evenly, but the strength of the consumable material is low.

Important! The most wear-resistant consumable material is a two-component fishing line with a round cross-section, reinforced from the inside.

The owner of a brush cutter should know that it is strictly forbidden to use metal wire, fishing thread and various strings.

We wind the fishing line

Slowly completed disassembly of the spool reel without losing its spare parts allows you to move on to the main task - winding fishing line into the reel. The technological features of the spool design and the number of working antennae determine the sequence of actions.

READ How to Properly Wind Line on a Trimmer Spool

Reel with one working antenna

The simplest option and simple sequence of actions:

The dimensions of the reel and the length of the original factory winding determine the recommended length of fishing line for winding - 2...5 m.
One end of the fishing line is inserted into the fixing technological hole located inside the spool.
The fishing line is wound onto the drum in the opposite direction to the rotation of the spool on the trimmer product - as a rule, on the inside of the reel an arrow indicates which direction the winding is going.
A small section of the fishing line is left free to be brought out - it is fixed in a specialized groove on the inside of the bobbin, designed to hold the winding when assembling the spool into working condition.
The remaining end of the line is passed through the hole in the outer part of the reel.
The reel halves are assembled and put on the trimmer rod.

The cord spontaneously elongates

There are situations when a trimmer user notices a very rapid consumption of fishing line. At the same time, he never hit the button on the ground to lengthen the fishing line. The reason that the line spontaneously lengthens, being cut off by a special knife on the casing of the device, may be the absence of a spring in the mowing head. Often, novice users of mowers, trying to load fishing line into the reel, forget to install the pressure spring in the head, or completely lose it when opening the lid, and in the future, do not even suspect its existence.

Line does not automatically extend

If, when you lightly hit the trimmer coil button on the ground, the line

does not lengthen, then the reasons for this may be the following.

Option 1 - biting occurred, i.e. clamping the cord between the turns. This problem usually appears if the user winds the line onto the reel unevenly, with intersecting turns, or winds it with insufficient tension. In the latter case, when the mowing head rotates at high speeds under the influence of centrifugal force, the cord begins to tighten, resulting in possible inter-turn clamping of the fishing line. To fix the problem, you will have to disassemble the reel on a trimmer and rewind the cord correctly, that is, in even turns with good tension.

Option 2 - the ends are too short and protrude from the head. The line may not come out when it hits the ground if its ends protruding from the head are not long enough (short). In this case, the centrifugal force is not enough to stretch the line. Therefore, you need to stop the unit (turn off the engine or unplug the electric trimmer) and pull out the line manually, after pressing the button.

Option 3 - fishing line

soldered inside the mowing head.
This leads to the fact that the reel
stops and does not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the reel during prolonged operation of the unit, impact of the fishing line on hard objects.

In the first case, the cord from third-party manufacturers may be made of low-quality and fusible materials that cannot withstand mechanical and temperature loads. Therefore, preference should be given to “branded” fishing lines.
But, if you nevertheless purchased a fishing line of unknown quality, and it often gets soldered during operation, then you can follow the example of some users who, after threading the cord into the reel, moisten it with either silicone grease (from a can) or mineral oil. This procedure greatly reduces the likelihood of soldering turns of fishing line together.
Also, the fishing line can become soldered if, during mowing, it hits a hard object (stone, fence, dry branch, etc.). As a result of this, it stretches a little and is pulled back into the head at high speed. The cord heats up due to friction, and its turns stick together. The only thing that can be done to eliminate this problem is to open the trimmer reel and rewind the line.

What types of trimmers are there and how to use them?

The trimmer is convenient for mowing small or difficult areas, for example, near a hedge, between beds and along paths. Today, manufacturers produce a wide variety of gasoline, electric and battery models, which can be selected to suit any owner’s needs.

A fishing line is used as the cutting element of the trimmer . During the process, sooner or later its length will end, and then the owner will be faced with the question of how to properly replace and secure the thread tucked into the removable spool.

Features of using trimmers

A trimmer that mows grass using a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, and row spacing in a garden plot.

Such a convenient, and most importantly, effective device as a trimmer exists in several variations:

As the names suggest, the types of trimmers differ markedly from one another. But regardless of the type of this tool, its cutting element may be a fishing line. Of course, the line threaded into the trimmer reel is not endless. And sooner or later it will need to be replaced with a new one.

The consumption of fishing line directly depends on the frequency of use of the device and the scale of the work performed. The more grass is mowed and the more often it is trimmed using a trimmer, the more actively the line is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to thread the fishing line into the trimmer reel?

READ How to Thread Line into a Trimmer

Not everyone knows the answer to this question. But winding the fishing line onto the reel plays an important role in the operation of the trimmer. For the device to function properly, it is very important to correctly wind the new line onto the reel. How to change the fishing line on a trimmer will be discussed in this article.

How to quickly and easily remove a coil with your own hands

Before replacing the old line with a new one in the trimmer's removable reel, you must remove the head.

The process is completely simple, even beginners can do the job:

Remove the top fixing cover.
Remove the removable spool.
Remove the spring if present.
Use a screwdriver to unscrew the bolt.
Remove the housing from the shaft.

Sources:

https://www.vse-dachi.com/kak-namotat-lesku-na-trimmer-pravilno.html https://san-lider.ru/leska/kak-pomenyat-lesku-na-benzinovom-trimmere-video .html https://homius.ru/kak-namotat-lesku-na-trimmer.html

How to thread line into the trimmer reel? Video instruction

Warranty production of the trimmer's factory refill will inevitably require replacement of the fishing line. Having a very rough idea of how to thread the line into the trimmer reel on their own, beginners are reluctant to take on this task. However, with some skills, mastering this simple science does not present any difficulties, and the similar instructions presented below will make this process as easy as possible.

How to remove the spool from the trimmer and remove the fishing line

Initially, before threading the fishing line into the trimmer reel, you need to remove it from there. The reel or pointer is a device that is located inside the mowing head, reel or drum. Heads come in different types (depending on manufacturers), but the principle of replacing line on a reel is the same for all. First of all, let's figure out how to remove the head from the tool, as well as how to get the drum with fishing line out of it.

This is interesting! You can replace the equipment directly on the tool, but if you are doing this for the first time, it is still recommended to remove the head and study the detailed winding process. After the technology has been mastered, replacement work can be carried out using a trimmer, lawn mower or lawn mower.

The instructions on how to unscrew the manual head on a trimmer are as follows:

Turn the tool upside down and, if necessary, clean it of dirt. With two fingers of one hand, grasp the cover latches (on the mowing head), which are located symmetrically to each other. After lightly pressing them inward, remove the protective cover from the drum

Next, remove the fishing line spool from the drum shaft. It is mounted on a shaft without fastenings, so it can be dismantled with one hand

The main part of the drum is secured with a screw, which must be unscrewed with a screwdriver with an appropriate tip or bit

To unscrew, you need to hold the base of the drum with one hand and use the other to unscrew it counterclockwise with a screwdriver

After this, you can begin dismantling. To do this, you do not need to pull it with all your might, but by slightly rocking it to the sides, slowly disengage it from the metal shaft on which the drum is mounted

When reinstalling, the head should be seated in the tetrahedral slots

This process is not difficult, and as you understand, there is no need to dismantle the entire head if you know how the replacement is carried out. When dismantling, consider the following nuances:

It is recommended to remove the head periodically to prevent corrosion of the threaded connection. If you never unscrew a screw, then if necessary, it will be difficult and even sometimes impossible to do so.
If the screw has a tetrahedral head bore, then for unscrewing you should select a screwdriver or bits of a suitable size to prevent the edges on the head from licking off
When assembling the unit, the threaded seat should be treated with lubricants, for example, grease or machine oil
If the edges on the screw are licked off, you can use special clamping pliers to unscrew it.
There are drums that do not require preliminary disassembly. To dismantle them, grab it and rotate it in the opposite direction clockwise

READ Stihl Fs 38 Trimmer Replacement Line Video

Knowing how to disassemble the drum, you should continue to figure out the process of replacing the trimmer line. The video below shows the detailed process of how to open the trimmer coil and disassemble it.

Which fishing line to choose to refuel a lawn mower

The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:

with a round cross-section - this is the most durable material for mowing herbaceous plants;
with a figured section - used for mowing soft plants;
twisted - used for thin grass;
professional type, not suitable for all equipment models.

To change the line on a lawn mower, you need to purchase a cutting thread that will be ideal for a particular type of mower.

READ Where is the Fuel Filter in the Sturm Trimmer

Criterias of choice

You can soak the thread in a bowl of water for a few minutes to increase elasticity and strength.