Homemade lawn mower: how to make it yourself - design and drawings of a homemade mower

Today, many property owners are asking the question: how to make a lawn mower with your own hands from improvised materials? And this is not surprising, since these types of devices are in great demand among consumers today, but, unfortunately, not every one of them can afford to buy a good, practical and high-quality lawn mower for caring for their garden, and every summer resident wants to have a beautiful green lawn. So what to do?

The answer is quite simple - to make this “miracle” of technology through your own efforts, and this article will help you with this. Here you can find answers to all your questions regarding this process.

Moreover, you will be presented with several methods for manufacturing such a unit, and each of them is interesting and unique in its own way. So, let’s actually start learning how to create agricultural “masterpieces” with our own hands and without the help of qualified specialists.

Friendship from a chainsaw

The first method is that we will use an old and long-needed chainsaw under the world famous name “Friendship”; you will learn about the technical characteristics of the Friendship chainsaw here. But if you do not have this model, then you can quite safely take a Ural chainsaw, for example, or another other model, there is no significant difference. Why domestic chainsaws, and not, say, imported models?

Everything is very simple, because these particular chainsaws have a high level of power, which we so badly need to create a lawn mower, which in the future will be able to cope quite well even with weeds and lawns with a significant amount of stones.

Chainsaw mower

So, before starting to understand the aspects of “creating” a lawn mower, it’s worth clarifying what main parts and so-called components it will consist of , so:

• Our main and effective mechanism will be the engine;
• the frame will provide a kind of support for installing all the necessary components of the device;
• protective casing;
• knives;
• wheels;
• parts and handles converging into the spectrum of the control system.

So let's get started. In this lawnmower, we will take the engine itself from an old chainsaw, complete. However, if the device is not working, then it will not suit us. You must remember that it is under no circumstances unnecessary to change anything in its mechanism. Simply take it out of the chainsaw and install it in a movable cart.

Now let’s figure out how we can make this cart that we need so much? To do this, you need to take 25x25 corners , which will have dimensions equal to 500 mm and 600 mm. Weld them together to form a frame.

After this, you need to install wheels in the area of ​​​​the corners, which are actually intended for your lawn mower; you determine their actual size yourself. With this kind of manipulation you will get a kind of chassis.

Assembly instructions

After this, you must unscrew the “steering wheel” and tire from the old chainsaw. As for the handle of our trolley, it can be made from water supply pipes with the direct possibility of height adjustment. Naturally, this adjustment is not such an important necessity, but it is worth noting that it will be much more convenient to work with the device, especially if it is used by different people with different growth rates.

The technical characteristics of the Maz 20 ton dump truck speak about the functionality and reliability of the machine.

Russian-made chainsaws have been proving their competitiveness on the world market for several years now. See for yourself by following this link.

Here //machinspec.com/kommunalnaya/evakuator/chto-predprinyat-esli-zabral.html, we will tell you where cars are picked up by tow truck.

You need to screw the so-called “steering wheel” to the manufactured handle, then extend the gas cable, as well as the fuel hose. The important thing is that the gearbox, together with the engine itself, must be rotated ninety degrees. This is done so that the shaft itself is located in the lower part, and for this it must also be rotated onto the frame.

This can be done by using a special hole that is located on the gearbox, but in a chainsaw it is used for fastening the bar, and also use two fastening studs of the flywheel casing, which is located in the lower part. In fact, we have completed the basis for our device; there is very little left, namely to install the cutting direction tool.

Chainsaw mower on video.

In order to make it, you will need a chainsaw “star” on which you actually need to install in a coaxial position a small piece of pipe with the following dimensions: length - 80 mm, diameter - 50 mm . After this, it is necessary to process this segment on a lathe.

But you need one more piece, but in this case its length should be 80 mm, while the diameter should be 58 mm. It needs to be put on exactly the first piece.

By performing these manipulations, you will get a kind of telescopic shaft made of pipes that need to be connected with special M6 bolts, which actually have locknuts. They must be in a position diametrically parallel to each other . As for the holes, you need several of them, since this way you can easily adjust the height of the cut of the grass itself.

Through work, the movement of labor will be carried out relative to each other, thereby, in a certain coefficient, they will be able, let’s say, to compensate for the imbalance itself.

And now the last thing you need to do is make a knife base. To do this, you need to weld a special disk made of metal to another pipe, and which has a dimensional indicator of 180 mm in diameter, made of 4 mm sheet steel.

DIY Chainsaw Mower Video

How to make a garden branch shredder with your own hands

The branches left behind after tree trimming are quite an awkward waste. Piled up in a heap, they take up a lot of space, and you can’t immediately put branches into the oven; you have to spend a long time chopping them with an ax. Making a fire and just burning it in the garden is a pity. A suitable option for a caring owner is to make a branch chopper with your own hands to process them into wood chips. And there will be a use for it - either burn it in a cauldron or use it for compost. We are interested in the designs of homemade crushers, since the prices of industrial units are not comparable with the volumes of wood processing in an ordinary private household.

Content

Types of garden shredders

What are the names of chippers used for crushing wood waste? Wood chipper, branch chopper, shredder, wood chipper - this is not a complete list of titles. Despite such an abundance of definitions, the structure of different units is virtually identical. It doesn’t matter which thresher consists of the following parts:

• an iron frame into which all parts and mechanisms are attached;
• main drive – electric motor or gasoline (diesel) engine with power take-off shaft;
• cutting mechanism;
• main drive (usually belt);
• protective casing;
• 2 bunkers - for feeding wooden sticks and unloading wood chips.

Choppers: from circular saws (left) and with a knife shaft (right)

In fact, homemade branch choppers are divided into varieties only by the design of the cutting mechanism; other elements differ only in size. If you carefully look at the crushing section drawings posted on the web, you can identify the following popular solutions:

1. In the center of the shaft, 2-3 10-piece circular saws equipped with hard alloy teeth are attached.
2. A design that replicates the structure of a jointer on a circular saw. How to make a lawn mower with your own hands from a washing machine video: mower from a chainsaw. Longitudinal grooves are made on the shaft (from 2 to 6 pieces, depending on the motor power), where chopping knives made of carbon steel are fixed. The branches are fed for chopping at an angle of 90° to the knives.
3. A disc thresher for wood, where the knives are attached to the plane of an iron circle mounted on a shaft. Chainsaw mower video! Here the branches must be fed at an angle of 30-45° to the surface of the disk, which is ensured by the design of the loading hopper.
4. A chipper with 2 shafts that rotate synchronously. Manual weeder and hiller in one. Do-it-yourself moped from a chainsaw and a bike 1. The cutting edges of the knives mounted on the shafts converge at one point when rotating. Because of this, not only crushing occurs, but also self-tightening of the branches after capture. The supply of wood is perpendicular to the rotating knives.

Threshers: disc (left) and twin-shaft (right)

Note. To increase the torque and cutting force, garden shredders use a flywheel mounted on the free end of the shaft. Do-it-yourself repair of the Shtil 180 chainsaw. An exception is a disk thresher for branches, where the flywheel is a heavy iron circle with attached knives.

Next, we will look at how to make the first 3 types of garden shredders without the help of others. A twin-shaft wood chipper is a rather difficult unit to manufacture, requiring investment and labor, which is not always justified. Hammer and other unique DIY wood chippers the video:

Manufacturing Guide

First you need to understand that without the ability to perform plumbing and welding and the appropriate tools, you cannot even make an ordinary branch chopper from circular saws. In addition, to create shafts and housings for bearings, you will have to go to a lathe, unless you can find a ready-made assembly from an old machine. The whole process is divided into the following stages:

1. Choosing a shredder design.
2. Selecting a motor for the drive and calculating the main gear.
3. Preparation of metal and parts that need to be turned on a lathe.
4. Frame assembly.
5. Installation of the drive, cutting mechanism and belt drive.
6. Installation of protective casing and hopper.

READ Chainsaw Patriot 3816 Carburetor Adjustment

Note. We are talking about a belt drive, as it is the most common in manufacturing and non-hazardous in operation. In the event of some tragedy or overload, the belt will slip or jump off without any consequences. The same cannot be said about a rigid connection via a chain (gearbox).

Disc thresher design

As for choosing the design of a homemade branch chopper, here are the usual tips:

• a unit of circular saws is an ideal option when you need to obtain small wood chips at the lowest cost;
• if you plan to chop branches of small diameter into a larger fraction, then a cutting mechanism such as a jointer is suitable;
• when you need to chop branches up to 5 cm in size in large quantities, it is better to make a disk thresher.

For reference. Small shavings and wood chips are often used by gardeners to make compost and mulch. You can also use it to make fuel briquettes for heating your personal home, which is discussed in detail in this article.

The knife shaft and its operating mechanism (like a jointer on a circular saw)

When the type of wood chipping has been selected, you can begin procuring parts, materials and equipment. But first of all you need to do...

Selection of engine and calculation of belt drive

Drive power is an indicator that determines how thick a branch you can process on a home-made thresher. Here are some tips for choosing a motor:

1. An electric motor with a power of 2.5-3.5 kW, minimum 2 kW, is perfectly suitable for your purpose. The 1.5 kW motor can be used to assemble a shredder for weed and small branches.
2. The power of a gasoline or diesel engine should be 5-6 liters. With. These are installed on household walk-behind tractors and mini-tractors.
3. It’s stupid to take an electric motor of very high power, unless you have one lying idle in your barn. It will consume an amount of electricity that is not adequate for the work done.

Note. The video shows how to set up a chainsaw carburetor with your own hands. The number of revolutions of the electric motor does not play a big role, since we will obtain the desired rotation speed of the knives due to the V-belt drive.

In order for your wood shredder to confidently crush branches, the blade shaft needs to be set to a speed of less than 1500 rpm by selecting the diameter of the drive and driven pulleys. The decisive factor here is not the speed of rotation of the knives, but the developed torque (force). The distance between the pulleys and the length of the belt also does not play a big role. Unless a belt that is too long reduces transmission efficiency and is less easy to tension.

Chainsaw mower

mower

from
a chainsaw
.

Rotary mower from Ural chainsaw

Mower dimensions

look here
The mower
was made to order

Calculation example. There is a 2800 rpm electric motor that needs to be installed on the crusher. The optimal solution is to reduce the shaft speed by half, to 1400 rpm. Hiller. With my own hands. Do-it-yourself moped from a chainsaw and a bike! Then the diameters of the pulleys will differ by 2 times. Do-it-yourself chainsaw sharpening. For example, the size of the driving pulley is 100 mm, then the diameter of the driven pulley (standing on the working shaft) will be 200 mm.

Advice. When ordering pulleys for a V-belt drive from a turner, it doesn’t hurt to think about the future. It is better to make pulleys with 3 or 4 grooves, so that the speed on the working shaft can be changed by rearranging the belt. Then the chopper can be adjusted to different operating conditions, for example, for crushing stalks of corn, sunflower or grass.

Pulleys with several grooves are more practical to use

Preparation of materials

The best way to save money on making wood chippers is to find suitable materials around the house. The following types of rolled metal are suitable for assembling the frame:

• single equal angle corner with a width of 50 to 63 mm;
• 2 corners of 35 mm, welded in a “box”;
• profile pipe measuring 40x40 mm;
• channel No. 6.5—10;
• round pipes with a diameter of 32-48 mm.

READ Soft Start for DIY Miter Saw

The electric motor is mounted on a steel sheet with a thickness of 10 mm and dimensions corresponding to the distance between the mounting holes on its flange (with a margin of 30-50 mm on each side). Chainsaw mower video! Chainsaw mower. Do-it-yourself Ural chainsaws. To tension the belt, 2 types of devices are used:

1. The holes in the plate for mounting the engine are made oblong so that it can be moved back and secured with bolts.
2. The plate is installed at one end on a hinge, then the belt is tightened due to the weight of the electric motor. On the other hand, it is fixed with nuts on studs, as shown below in the photo of a homemade chopper.

Here the tension occurs under the weight of the electric motor

To make the simplest shredder design, buy 20-25 circular saws with carbide tips and the same number of spacer washers with a diameter of 20 mm. This will give you a working area of ​​about 80mm wide, which can be made larger or smaller if desired by adding or removing saws.

Note. The thickness of the teeth of a circular saw is greater than the steel base, so it is impossible to fasten the tools close to each other. To compensate for the width of the teeth, washers are used, which are placed between the saws.

The shaft driven by the belt must be turned on a lathe from a steel rod. But before you make this part, find 2 bearings whose fit size will fit the shaft. You will also have to make bearing housings with mounting flanges. Sometimes they can be bought ready-made on the secondary market or in specialized stores.

Advice. As an option, you can use rear axle bearings with a mounting diameter of 25 mm from classic Zhiguli models, and use a ready-made stud with nuts as a shaft.

To install circular saws on the shaft, you need to cut a thread. As a flywheel, use a circle of steel with a thickness of 10 mm or more, or a large pulley from some kind of agricultural machinery. You will also need a steel branch support plate to act as a counter knife. Cut it from a sheet at least 10 mm thick.

Knife shaft drawing - front view

If you have chosen the design of a branch chopper with chopping knives, then you can take the drawing of a knife shaft for a jointer as a basis. Just change the diameters of the axles where you need to press the selected bearings. It is better to reduce the width of the working part to 100 mm, because you are not going to put whole logs into the crusher. Do-it-yourself chainsaw sawmill video, photo. Homemade chainsaw karts and children's ATV; They make their own chainsaws. Wood chipping knives are usually made on a milling machine from car springs.

Shaft drawing for 3 knives - end view

To assemble a disk-type chipper, in addition to a shaft with bearings and knives, you will need:

• steel circle 15-20 mm thick with a diameter of 40-50 cm (depending on the power of the electric motor);
• sheet metal of at least 5 mm for the casing, the front wall of which serves as a counter knife;
• the same, 1-2 mm thick for welding the bunker;
• bolts M12—16 with nuts for fastening.

The cutting device of a disk chopper with fastening knives is shown in the drawing:

The number of knives can be changed (put 2 or 3 pcs.)

Frame making

Regardless of what type of crusher you choose, you need to make a base for it - a frame, where the drive and chipping mechanism will subsequently be installed. Everything about repairing a chainsaw with your own hands, the Husqvarna saw on the top cover says 5200. Weld it from corners or pipes, using the following recommendations:

1. Select the height to suit your height so that it is convenient to place branches in the bunker.
2. The structure must be stable. Therefore, make the frame width at least 500 mm, and the length is arbitrary.
3. Give the frame rigidity by welding cross members between the uprights.
4. To easily move the unit to the frame, it is advisable to attach a pair of wheels and weld a handle.

READ How to Sharpen a Metal Drill Using a Grinder Video

Compact motor placement

Consider where you are going to install the electric motor. For a shredder made with your own hands from circular saws, the recommendation is this: place the motor in the frame so that it does not protrude beyond its dimensions. The same applies to other types of crushers.

Chopper assembly

First, let's assemble a chip cutter from a package of circular saws, following the following order:

1. Assemble the saw blades onto the shaft by placing washers between them and tightening them with nuts on both sides.
2. Press the bearings onto the shaft and then into the outer housings. An overview of various homemade products that you can make from a chainsaw with your own hands. Bolt the latter to the frame, having previously made holes in it.
3. Place the pulley and flywheel on the ends of the shaft and fasten them securely.
4. Place a steel plate – counter knife – close to the saw teeth.
5. Install the electric motor and final drive, and tighten the belt properly.

Advice. Before assembly, be sure to lubricate the bearing cages by removing the plastic caps. Place the saws so that the tooth profiles do not coincide.

It is better to fasten the counter knife not by welding, but by bolting through oval-shaped holes. The point is to adjust the gap between the edge of the plate and the working teeth, which allows you to change the size of the chips within small limits. The direction of rotation of the saws is “toward”, that is, the teeth should “run” onto the counter knife.

After installing the parts, make and install a protective casing made of thin metal, and a receiving hopper in front. The dimensions of these elements are arbitrary, the main thing is ease of use and safety. Finally, connect the unit to the power supply with a power cable through a 25 A circuit breaker.

Assembling the knife crusher is carried out in the same order, only first you need to install and secure the knives in the grooves of the shaft. There is one subtlety here: the more the cutting edges protrude beyond the surface of the shaft, the larger the chips will be at the exit. The hopper is welded in such a way that the branches are fed at an angle of 90° to the cutting mechanism. How to do this correctly is shown in the video :

Advice. The unit can be improved by making an additional tightening device. It is necessary to make a second shaft of smaller dimensions, weld metal strips along it and connect it to the main mechanism via a belt or chain drive. The speed of the tightening shaft must be reduced, otherwise the branches will hit your hands during loading.

Homemade tightening drive

in making a disk shredder ; just follow the drawings and securely fasten all the components. Do-it-yourself lawnmower, watch the video: DIY chainsaws. The only point: when making the outer casing, try to make the front wall along which the knives rotate thicker and the gap between them smaller. Otherwise, the flexible thin sticks will be pulled inward by the mechanism and screwed onto the shaft.

Assembly drawing of crusher

The rear wall of the casing must be firmly attached to the frame at least at 4 points, for which additional brackets will need to be welded, as shown in the assembly drawing.

Conclusion

The most difficult operation in making a garden shredder is turning the shaft and milling the knives from the spring, which you cannot do with your own hands. You will have to pay for this service, unless the household has a couple of metalworking machines. The task will be simplified if you can find a drive assembly, for example, from an old circular saw.

Another option is to use the circular saw itself to crush the branches, installing a working cutting mechanism on its drive. Again, the shredder can also operate from a walk-behind tractor engine, you just need to make the right belt drive.

Source

From the Bulgarian

It is possible that today a do-it-yourself electric lawn mower is made from an angle grinder and has a large number of different methods, it is not known, but at least one method is reliable and practical, as it is used by a significant number of modern “craftsmen”. Actually, we’ll talk about it now, so.

In order to make such a lawn mower, you need to directly install the grinder itself to such a simple agricultural tool as a hoe, no less using simple adhesive tape. As for the disk, it can be taken from a so-called circular saw, since its size is most suitable for us.

After this, it is imperative to attach the cord to the handle of the chopper itself , this is done so that it simply does not get in the way and does not fall under our lawn mower.

An example of a do-it-yourself lawn mower in the photo.

Model from an angle grinder

In fact, our device is ready, the only thing that needs to be increased is the diameter coefficient of the saw blade itself; this feature is needed if you have large areas of the area that need to be processed, and if not, then the one described above will work perfectly. OK it's all over Now. As you can see, the method with an angle grinder is much simpler than the previous one. You can learn about a more convenient unit, namely a homemade rotary mower for a mini tractor, from this article.

From a vacuum cleaner

First of all, it is worth noting that making a homemade electric lawn mower from vacuum cleaner parts is not that difficult, so the main thing you should acquire is a lot of patience and the necessary parts, namely:

• wheels (can be from an old stroller);
• cooker;
• a couple of steel sheets;
• a hand saw or a hacksaw, maybe even an old one.

So let's get to work.

It is also important that it is best if you use large wheels, since in this way the movement of our lawn mower will be quite easy and smooth, and it simply will not, let’s say, get stuck on every uneven ground. By the way, even the handles from the same stroller can serve you well in creating your “masterpiece.”

Watch the video on how to make a lawn mower from a vacuum cleaner.

Next, what you must do is cut out a special platform from steel material , which in the future will serve us as an installation support for the engine of an old vacuum cleaner. It is worth noting that this motor must be placed in such a way that its direct shaft is in the lower area.

Actually, if you have already completed the installation, in this case you need to make a special protective casing for the engine, but remember that its thickness must be exactly 1.2 mm. But at the same time, the diameter of the necessary holes for this “protection” should have a larger coefficient than the shaft by literally 4 mm. And if you are the happy owner of a large plot of land, then you should learn about such a useful addition as an extension cord for a reel-to-wheel lawn mower; you will find detailed information about this miracle here.

Moreover, you should not forget that the propulsion installation must be carried out at a distance of 3-4 cm from the ground itself, since otherwise the device may simply be damaged during operation. Also of no small importance is a disk made of metal, which actually needs to be installed on the motor shaft itself .

Lawn mower made from vacuum cleaner

The lawn mower blade must be made in several copies. To do this, it is necessary to cut a kind of disk from a sheet of metal, the dimensional coefficient should be equal to 38-40 mm, after which it is put on the shaft and welded to its surface.

From the washing machine

First of all, it is worth noting that to create a lawn mower you can use single-phase electric motors from washing machines. As for the wheels, they are also perfect for old baby strollers. You will also need water pipes and angles made of steel material.

It is important to remember that to drive the blade of the future lawn mower, you must choose a good suitable and high-quality electric motor. But here, too, a washing machine will come to your aid, since its motor is excellent .

The video shows a do-it-yourself mower from a washing machine.

As for the width of the device’s grip itself, it should not exceed 250 mm.

If you want to assemble a helper yourself, then we suggest you take a look at a do-it-yourself segment mower that will serve you for many years.

What homemade chainsaw products have already been invented?

The first use of a chainsaw from the point of view of many developers is to cut logs into beams with its help. But, if you hold the chainsaw suspended manually, the cutting accuracy suffers, especially when the beam is four to six meters long. To prevent the cut from moving away from the desired line, we came up with the idea of ​​rigidly securing the chainsaw in a frame that moves along guides.

In such a sawmill, the log lies motionless, and the carriage with the chainsaw is located at the required height, depending on the desired thickness of the beam, and is fixed with four screws.

Thanks to the precise movement of the frame, a smooth and neat cut is obtained. You can cut boards in the same way, but due to the large thickness of the cutting chain you will end up with a lot of waste.

From the trimmer

In fact, the process of making a lawn mower from such a “main component,” so to speak, is no different from the methods presented above. The essence of the work is the same, and the parts used are the same.

The only thing is that for this type of device it is necessary to use a motor from a trimmer . You can take it from an old model, since it is naturally not profitable or logical to disassemble a new trimmer.

Grass mower from trimmer

Such a lawn mower will do the job much more efficiently and it will be much easier and more comfortable for you to work with it, since it is capable of “capturing” a larger mowing range and, in addition, it also has a special grass collection that you can either buy or make yourself . This process does not require any special skills, and all you need is a piece of fabric. If you are not a fan of the DIY assembly process, then you can simply purchase a manual electric lawn mower trimmer, which boasts a compact size.

Petrol mower based on a 2.2 kW chainsaw

Greetings to all DIY lovers, today we will look at how to make a powerful lawn mower from an electric trimmer and a chainsaw. The author had an electric trimmer, which did not want to mow; in the thick grass the engine power was not enough. It was decided to make a homemade product based on a lawn mower. Of course, such a remodel makes sense only if you have a workshop with the necessary equipment, as well as the necessary parts. The tool turned out to be quite powerful, the scythe mows thick grass perfectly. If the project interests you, I suggest you study it in more detail!

Materials and tools used by the author:

List of materials:

— spare parts for the trimmer; — iron pipe and bearings; - chainsaw; — handle for engine control (from the trimmer); - sheet iron; - bolts and nuts.

The process of making a lawn mower:

Step one. Making a lawn mower bar

First of all, we will make a rod in which the lawn mower shaft will rotate. In cheap lawn mowers, special bushings are installed in the bar that hold the shaft. Of course, these bushings wear out quite quickly, and the shaft begins to throw inside the rod. The author decided to make the rod himself; for this we need a pipe of a suitable diameter; we need to press bearings into it.

As a result, we install a reducer for a lawn mower at the end of the pipe and at this step the work is completed.

Step two. Clutch

Next, we need to dock the working shaft of the scythe with the shaft of the chainsaw. First of all, we need to cut off the clutch cup of the lawn mower, in the end there should be one plate left. To give the plate a perfectly round shape, the author uses a drilling machine.

At the next stage, you need to make an adapter that will allow you to hook onto the chainsaw sprocket. The author makes this adapter himself from a thick iron plate. We transfer the outline of the star onto the workpiece by painting and get to work. We drill out the core and other areas on a drilling machine. Well, then we arm ourselves with a file and finalize the part. At the end, all we have to do is cut the part to a round shape and weld it to the plate that remains from the clutch cup.

Step five. Handle and assembly

We make a strong handle for a lawn mower; the author made it himself from a pipe. We attach the handle to the bar using fasteners from a lawn mower. We put a “trigger” on the handle to control the engine from the lawn mower. And to connect the cable to the chainsaw throttle, the author uses a special homemade fastener.

At the end, all we have to do is install the fasteners on the bar with which we will hang the braid. That's all, after this the homemade product is ready, you can test it. We go to the field, start the engine and get to work. The machine can easily cope with fairly thick grass.

This is the end of the project, I hope you liked the homemade product. Good luck and creative inspiration if you decide to do this again. Don't forget to share your ideas and crafts with us!

conclusions

In this article, you had the opportunity to familiarize yourself with the most popular methods of making lawn mowers with your own hands and using improvised means. Without a doubt, we can say that after reading the article you have a great desire to try to create such an iron assistant for yourself, since in fact, none of these processes are particularly complex or financially expensive.

You may also be interested in an article on how to make a cart for a boat motor with your own hands (drawings).

What do you need for work?

To make homemade products from a Friendship chainsaw with your own hands, you need a beginner’s tool kit, a desire and an idea. The main tools needed for work are an angle grinder and a welding machine. You already have a desire, otherwise you would not be on this page. The very idea for converting the Druzhba chainsaw into any unit can be found in this article.

In the article we offer only an idea, without step-by-step instructions for action. Otherwise the article would have been ten times longer. If after reading you still have questions and you need detailed instructions, then leave your wishes in the comments to the article and we will write a step-by-step guide for converting a chainsaw into a specific unit that will collect the most wishes.