Rules for mowing the lawn using a lawn mower, trimmer: conditions and safety

How to properly mow the grass on your property and avoid mistakes

The last haircut in the fall should not be done in a cold wind, otherwise the tips of the blades of grass will be frostbitten.

Here are a few rules that must be taken into account when mowing the lawn:

first of all, make sure that the height is set to the same on both sides of the mower drum, otherwise you risk simply ruining the lawn;
clear the area of stones, sticks, wire and other debris that could harm the lawn mower;
sweep the surface of the lawn with a broom or rake to level out piles of earth left by earthworms and lift the grass towards the blades;
mentally outline the direction of the haircut - adjacent stripes should be at a certain angle to each other;
change the direction of the stripes to perpendicular each time you cut, then you won’t get ribbed stripes on the lawn;
The last cutting in the fall should not be done when there is a cold wind, otherwise the tips of the blades of grass will be frostbitten, which will negatively affect the quality of the lawn next year.

Cutting grass with a lawn mower is not as easy as it seems. Of course, you will need to first learn how to operate the mower before you start mowing your lawn. However, during the work process, you may accidentally make mistakes that will noticeably worsen the appearance of your lawn. The most common mistakes:

The grass on the tussocks is shaved clean

If your area is characterized by the presence of many hummocks, it is worth increasing the cutting height and adding mulch to level the surface of the lawn. While mowing, try not to put pressure on the mower handle or jerk it back and forth.

While mowing, try not to put pressure on the mower handle or jerk it back and forth.

After mowing, the tips of the grass turn brown

This effect can be caused by dull blades on a rotary mower (the blades of grass are crushed rather than cut), damage to the bottom plate of the cylindrical blade, or its incorrect adjustment. Grass may also turn brown if it was wet during mowing.

The lawn looks ribbed

If, while cutting, narrow strips of long and short grass appear perpendicular to the movement of the mower, this means that the blades in the cylindrical lawn mower are turning very slowly. Resistance to the blades can be caused by dew on the blades of grass (which is why you need to sweep the lawn before mowing), or a cutting height that is too low or too high.

https://youtube.com/watch?v=y3C8cL_oLpg

Video about how to mow a lawn

Beveled stripes along the entire length cross wide waves

A similar “washboard effect” is observed if the grass is cut in the same direction each time

The same vibrations during lawn mowing result in waves appearing on the soil surface, which is why it is so important to change the direction of the stripes with each mow. To level the soil topography in the fall, you can add mulch

Gardening scissors

A lawn shear is a small hand-held tool for cutting small or hard-to-reach areas where a trimmer or lawn mower cannot be used. They are useful if you need to carefully trim the grass along the path, along the edge of the lawn, between tiles or near other plants. The blades of the scissors are parallel to the ground and can be swiveled. Lawn shears can be battery-powered or mechanical. Battery life depends on its capacity.

Taking care of your lawn using the right tools will not take much time, and the results will be excellent. Lush greenery will delight you and delight your neighbors. A beautiful lawn is a great place for outdoor recreation and children's games!

Arranging a lawn is a kind of final chord of all landscaping work carried out on a personal plot. We can talk about the advantages of such a significant element of landscape design, which is a decorative grass carpet, for a very long time. For example, a properly planned lawn combines individual elements of a garden ensemble and makes the garden plot visually lighter and more spacious, while the grass growing on it absorbs dust particles, moisturizes the air and saturates it with oxygen. In addition, the emerald green color of such a man-made lawn gives rest to tired eyes, and the aroma of cereals heated in the sun calms the mind and calms the nerves

It is very important to mow your lawn regularly and correctly. Let's talk about how to mow the lawn correctly!

The owners of English estates have been cultivating their famous lawns for centuries, but now you can acquire a nice green area suitable for children's fun and picnics much faster. Owners of household plots these days do not need to independently collect in the meadows, and then patiently care for their seedlings, without being sure of the final result. Now, in order to get a beautiful lawn, you just need to sow a mixture of seeds bought in a store and wait two to three months. But if even this insignificant period seems too long to some gardeners, then for such particularly impatient citizens, landscape designers have come up with a design that you can walk on a week after it has been laid.

Problems when operating lawn mowers

Like any gardening equipment used, wheeled lawn mowing equipment requires compliance with the rules of safe use. Motorized equipment may only be operated if it is in good condition.

– this is an unshakable requirement. And before turning on an electric or gasoline unit, you must ensure its integrity. When carrying out work, it is necessary to comply with general safety rules and the requirements of the manufacturer's instructions.

There are five main problems when using a lawn mower:

hitting an obstacle;
leaking oil;
knives are clogged with grass;
the unit rake the earth along with the grass;
uneven cut.

All problems can be solved to one degree or another. In the first two situations, you will most likely have to seek help from specialists. And to prevent such problems, it is recommended to check the area before mowing for the presence of stones and other objects in the lawn grass, and also not to store the device upside down.

Young, soft and juicy grass can clog the ejection hole, and then unstable, ragged operation of the motor is observed. In this case, you need to periodically stop work to clear the hole from adhering grass segments using a thin, sharp instrument.

When the mower powerfully rakes not only grass stems, but also clods of earth, reconfiguring the cutting height

so that the knife does not reach the soil. If a unit with a normally working motor cuts the grass in uneven strips and shreds, then the problem is with the knife: it is either dull or not installed quite correctly.

When working with a lawn mower, do not forget to use personal protective equipment.

Check your work equipment regularly to identify defects in time and solve the problem before a serious breakdown occurs.

If you live permanently in a private home, it is not difficult to maintain a systematic lawn care schedule. Even in wet weather, wet grass can be mowed with a lawnmower or trimmer a day later, after it has dried. Caring for natural grass in a summer cottage is much more difficult. Since visits fall on weekends, mowing occurs on these days. What to do if the weather turns out to be rainy?

The question of whether it is possible to mow wet grass with a trimmer or lawn mower is one that we hear very often from summer residents. Opinions on this matter vary radically. Some argue that it is possible, citing as an example the old saying “Mow your hair…”. The latter come out with a categorical “No.” So, where is it, really? Who to believe?

Why you shouldn't use a trimmer to cut wet grass

There are also indirect reasons why it is impossible to mow grass on a personal plot that is wet from dew or rain. These include:

Early trimmer wear;
Damage to the lawn.

How can you disable a lawn mower when mowing wet vegetation? It's simple. It is released as a result of a short circuit when water gets into the power compartment. In addition, even if everything is very well sealed, there is a high possibility that the engine will not withstand the heavy load created on the flexible shaft of the trimmer. Well, the shaft itself can turn. Such loads in most cases appear from the sticking of wet grass on the knives and on the spindle to which they are attached.

For trimmers with a gasoline engine, cutting grass in wet weather, due to enormous loads, increases the degree of wear of the main components and assemblies. Is it possible to mow wet grass with an electric trimmer. Here we can note the early failure of the piston pair, as well as other moving parts. In most cases, the piston pair fails due to overheating of the motor. In our case, the motor will overheat from the load created by wet grass during mowing.

If you mow wet grass with a gasoline trimmer, to avoid overheating the engine, let it idle for 30 seconds without load. This method will remove excess heat and save the piston pair.

How to properly mow the grass on your property and avoid mistakes

Working with a trimmer is quite simple - easier than using an ordinary scythe. But everywhere has its own specifics, so before mastering a new technique, you should do what many leave for later - carefully read the instructions. This is already enough to roughly understand how to use the trimmer, refuel it, figure out how to charge its battery or connect it to the power supply.

As for the protective equipment, the glasses and gloves recommended according to the instructions will not hurt at all, but the most important thing is to protect your feet. The cutting tool, especially if you mow with a gasoline trimmer with metal blades, rotating at enormous speeds, picks up debris, pebbles and cuttings of vegetation that fly away at such a speed that they can cause injury to a person. Therefore, it is advisable to work in trousers and closed shoes or boots.

As for ear protection, a noticeable need for this arises only for the “loudest” gas trimmer - based on a two-stroke engine. They are usually equipped with special headphones with a headband, necessary to reduce the sound pressure on the eardrums.

With an electric cordless tool, everything is simple - after checking the presence of lubricant, just insert a charged battery into the appropriate socket so that it is ready for work. If the tool is powered from the mains, you will need an extension cord to reach the intended cutting location. The wire must be placed outside the area of possible action of the trimmer blades.

The area should be as free as possible from foreign objects: glass, stones, wire, snags, etc. The presence of people closer than 15 meters is also undesirable. Depending on the capabilities of a particular trimmer and the intended work, you need to select the appropriate cutting attachment. You can use a mowing head with line for grass, metal blades for weeds or hay, or a brush saw. Mowing should be planned in such a way as to move forward, moving away from buildings and people.

The trimmer should fit well in your hand. Many people prefer a fairly lightweight tool that can be used to work “in weight.” Otherwise, it should be well balanced, on a comfortable belt or backpack suspension, since it will not be possible to mow correctly with a trimmer without this. A very convenient tool is one with a “bicycle” handle, which allows you to easily hold the mowing head at approximately a constant height while mowing, and the tip of the cutting tool at the required distance from the ground.

Here are a few rules that must be taken into account when mowing the lawn:

first of all, make sure that the height is set to the same on both sides of the mower drum, otherwise you risk simply ruining the lawn;
clear the area of stones, sticks, wire and other debris that could harm the lawn mower;
sweep the surface of the lawn with a broom or rake to level out piles of earth left by earthworms and lift the grass towards the blades;
mentally outline the direction of the haircut - adjacent stripes should be at a certain angle to each other;
change the direction of the stripes to perpendicular each time you cut, then you won’t get ribbed stripes on the lawn;
The last cutting in the fall should not be done when there is a cold wind, otherwise the tips of the blades of grass will be frostbitten, which will negatively affect the quality of the lawn next year.

While mowing, try not to put pressure on the mower handle or jerk it back and forth.

Video about how to mow a lawn

A similar “washboard effect” is observed if the grass is cut in the same direction each time

The same vibrations during lawn mowing result in waves appearing on the soil surface, which is why it is so important to change the direction of the stripes with each mow.

The role of equipment

It's important to point out from the outset that there are two main types of trimmers, each of which handles wet vegetation differently. Some devices are equipped with a gasoline engine, others are driven by connecting to an electrical outlet or installing a battery. In turn, electric mowers are divided into two subgroups: with the motor located in the lower or upper part of the device. Only gasoline trimmers or hand scythes can remove wet grass safely enough for the user.

In this case, it is categorically undesirable to use an electric lawn mower. Sometimes you can come across statements that this requirement applies only to devices with a bottom-mounted motor. Such an electric motor comes into direct contact with water. Because of this contact, there is a risk of a short circuit.

However, you should not use an electric mower with a top-mounted engine after rain.

If water does get inside the power plant, there is a risk of not only a short circuit, but also an electric shock. It is worth noting that these restrictions apply not only to trimmers, but also to full-fledged lawn mowers. Assurances from manufacturers and marketers about safety should not be taken into account. To reduce the risk to yourself and your equipment to a minimum, you should use a lawn mower. But there are a few more subtleties that should definitely be taken into account.

How to mow tough grass with a lawn mower. life hack

Even if the mower does not fail, and its owner is not electrocuted (let’s assume such a favorable situation for a minute), you still cannot mow damp grass with an electric trimmer. This is a deliberately abnormal operating mode, due to which the equipment wears out too quickly. Wet vegetation offers much greater resistance to cutting elements than it should. Therefore, even very well insulated motors operate under overload.

Due to wet grass sticking to the knives and the spindle, the load on them will definitely increase. This cannot be avoided, and no skill of mowers, no methods and schemes for clearing the lawn will help. Not only the motor suffers, but also the shaft, which sometimes turns.

Problems when mowing wet grass can also occur with gasoline-powered machines. Yes, they are more powerful than their electric counterparts, but the load still exceeds normal values. The first things to come under attack are the piston pairs and other moving parts. If there is no choice but to use a gas mower, you need to take care of it. When mowing wet grass, periodically switch the machine to idle mode without load. 30 seconds is enough to remove excess heat and also save the trimmer's life.

And more about different situations

When talking about mowing wet grass, you need to distinguish between the following possible situations:

it is wet after rain;
It is raining;
The cause of moisture is a damp area (lowland or soil water).

In the first case, you can take a risk and try to clean up the mess with a gas mower. In the second case, mowing is impractical. In the third, you will first have to solve something with humidity and only then put the lawn or lawn in order. If you often have to mow wet grass after rain or “in dew” in a small area, then it is better to use not a trimmer or a lawn mower, but a simple hand scythe. You need to look not only at the grass that is being removed, but also at the grass where the power cord is placed.

Wetting it can be a very serious risk factor. To mow the grass after rain, you need to wait a little. A few minutes, even in a very big hurry, will not noticeably reduce the time that can be allocated to mowing.

And the result may be clearly better. It is usually allowed to mow grass when there is dew, even with an electric lawn mower or electric trimmer.

As for mowing wet grass, there are also the following objections to it:

walking with a trimmer or lawn mower in such conditions is more difficult, you can easily fall and get injured;
you will have to spend more time on work;
after mowing, it will be necessary to clean the device itself more thoroughly;
wet chlorophyll will leave more stains on clothes, skin, shoes.

Now you need to figure out exactly how to proceed if you decide to use a gasoline trimmer to clean the lawn or lawn in wet weather. An important rule is to maintain the optimal length of the grass. By shortening it excessively, especially in the summer, summer residents risk causing the plants to dry out early. It is unlikely that this will contribute to a good appearance.

Safety requirements are standard: you need to wear goggles and gloves, and also take care to protect your feet.

Of course, wear durable, waterproof shoes. Headphones or earplugs are used only when working with a two-stroke gasoline trimmer. In a large clearing with flat grass, mowing is carried out along imaginary squares, conditionally dividing the entire territory into them. They first move along the perimeter of each square, then mow it from the inside and move on to the next part of the lawn. Regardless of the weather, you should do the following before starting work:

check the serviceability of the equipment;
remove all debris and foreign objects from the site;
replace worn cutting elements if necessary;
determine the direction of cutting so that the lawn does not resemble a “washboard”.

To learn how to mow wet grass with a trimmer and lawn mower, watch the following video.

Sources:

https://vnovinky.ru/kak-kosit-travu/ https://stroy-podskazka.ru/trimmery/kosit-mokruyu-travu/

Lawn mowing

When sowing green cover, only high-quality materials purchased from a specialized store should be used so that bald patches do not subsequently form on the lawn area. The first haircut with a trimmer after planting should be gentle, performed according to the rules:

You need to wait until the grass reaches 14 cm in height.
The lawn is cut with a trimmer up to 8 cm.
Over the course of a couple of years, the grass on the ground lawn is mowed to 4-5 cm in height.
If the lawn is functional or landscaping, then you need to remove the cover with a trimmer to a height of 5 cm.
A lawn intended for a playground or sports activities is resistant to trampling and is cut to a maximum of 5 cm.

To plant quality turfgrass, you need to prepare. It is better to sow grass with seeds, pre-treated with special solutions to prevent the formation of diseases. To remove grass with a trimmer correctly and safely, you need to follow the recommendations:

It is necessary to remove items from the lawn that could create difficulties when trimming with a trimmer, for example, garden furniture, decorative items, garden tools, toys, debris in the form of branches and stones.
To increase the efficiency of the lawn mowing process, it is worth combing the area with a rake and a hard-bristled broom.
The best time to cut the grass with a trimmer is considered to be morning or evening, and choose warm days with little cloudiness.
It is strictly forbidden to remove grass from the lawn in the rain.
It is strictly forbidden to even try to mow the grass with a lawnmower with unsharpened blades.
The grass is cut with a trimmer in parallel strips.
With each subsequent cutting of the grass in a given area of the lawn, the direction in which the lawn mower moves changes.
If the lawn has a slope, cut the grass at an angle directed down the slope.

Why it is not advisable to work on the lawn with a trimmer or lawn mower in the rain or when there is dew on the grass:

It will not be possible to achieve a perfectly flat surface when mowing the lawn, as the blades of grass will stick together.
The lawn mower will become too clogged with grass and cleaning will be a hassle.
When wet grass is mowed, it is not cut, but torn off at the tips, and this can lead to the formation of a brown tint, which will significantly spoil the appearance of the lawn.
For safety reasons, working with power tools during rain (for example, mowing the lawn with a trimmer) is strictly prohibited, as there is a high risk of electric shock.

Note! After not too heavy rain, it is quite possible to mow the grass with a trimmer, but only if it is slightly damp. In this case, the water will act as a lubricant when cutting the grass.

How many times a week or month should you use the trimmer to remove overgrown grass? Pruning is a significant stress for any plant, including the lawn. The cover will be restored fairly quickly, but after cutting the grass there will be increased loss of moisture, reduced immunity, which can cause diseases. This can be eliminated if the grass is mowed to 1/3 of its length in one approach, after which the lawn is fertilized and watered. If you do not water and mow the grass regularly, the area will begin to become covered with weeds.

Lawn mowing

Reviews from netizens

I don’t agree - it’s very difficult to use a lawn mower, it’s a bit heavy and takes a long time (for me). I still couldn't get used to it. I myself only mow by hand; I mowed for a long time with a poorly cut and blunt scythe. Nevertheless, I mow down a 750 kg trailer with an impressive mountain in 20-30 minutes with smoke breaks. Depends on the grass and mood. I didn't count the installation time. I only mow during the day; I can’t do it at other times. I mow wherever I have to, that’s why the grass is different. By the way, I mow in both directions, felling, I think it’s called - I do it with ease. This is only the third year I have been mowing myself and constantly throughout the entire grass season. My husband mowed down the trailer in 10 minutes - I was simply delighted #128518; But a person mows down all his life. Yes, and he did the braid fine, no comparison with me. But these are two extremes, so I started a topic to find out, so to speak, the average indicators. N969РВ https://www.prokoni.ru/forum/threads/kosba-vruchnuju.143546/#post-2700918 When mowing with a hand scythe, not so much You need strength as much as dexterity. IMHO. How many times have I observed in the village - the old grandfather mowed down better than the young and strong. I never learned how to mow with a hand scythe, apparently I don’t have enough patience, but with a gas scythe it’s very good. Again, a plus, manual is good only when there is dew, but petrol is good at any time. In 1.5 hours with a lawn mower I can mow and lay down a full car trailer (750 kg). We usually mow together, then one mows, one collects and leaves in less than an hour. With a lawn mower, it’s easier to lay 2 rows in one windrow, then collecting them is 2 times faster. Nowadays, lawn mowers are not expensive, even with 1-2 horses they will pay for themselves in 2 seasons, that’s for sure, and saving your energy is also worth something.

READ How to Cut Grass with a Line Trimmer

Rule No. 4 – properly prepare the lawn for mowing

You can’t just take a mower out of the closet and immediately get to work. It is necessary to carefully prepare and inspect both the equipment itself and the site. Before cutting, be sure to do the following:

Remove all unnecessary objects from the area - sticks, stones, other debris that could damage the instrument;
To achieve the most uniform grass height, lift the grass first. To do this, comb the lawn with a rare rake;
Combing with a rake must also be done if there is dew on the grass. You need to knock it down to the ground and wait a while for the plants to dry. You can use a soft broom or broom. And not only so that wet grass does not get chewed, but also so that too wet grass does not clog the bag for collecting it;
Now carefully inspect the working tool. If it's a lawn mower, make sure both wheels are set to the same height;
Never cut grass with dull blades. Poorly sharpened knives will crush it;
Before starting work, mentally think through the trajectory of your movement. It is recommended to change direction each time. This will help achieve a more even haircut. The vibrations from the mower can cause the soil to sag a little, and if you move the same way every time, at some point the grass in the area will be of different lengths and the area itself will become wavy. If today you decide to mow the lawn from left to right, then next time move perpendicularly. Be sure to ensure that each subsequent strip overlaps the previous one by at least 1/3 of the mower’s cutting width. At the edges there are sometimes untouched blades of grass. This technique will allow you to trim them right away, without specifically returning to different corners of the lawn. This way it won’t take much more time to mow, but the result will be much better.

How to mow correctly with a lawn mower and safety precautions

The first step is to install the cutter, which is attached to the gearbox, followed by fixing the shaped washer. Next, put on the knife by aligning the hole with the protrusion of the washer and further installing the upper shaped washer. Before mowing properly with a lawn mower, you need to prepare a working fuel mixture, which is a combination of high-quality gasoline and oil in a ratio of 25 to 1, respectively.

All surfaces on which there are traces of spilled liquid must be wiped after refueling the instrument. After making sure that all fasteners are fully tightened and the adjusting tightening is securely fixed, place the tool on a hard, flat surface, set the throttle handle to the “OFF” position, and the regulator on the handle to o.

Before mowing with a lawn mower, do not forget to pump the fuel mixture into the starting system by activating the valve located under the tool’s air filter several times. Hold the garden tool in one hand and pull the recoil starter cord with the other. When activating the power unit of the tool, reorient the throttle grip to the “ON” marking. Allow the tool to idle for a while. Having secured the equipment with a carabiner to the unloading system, pull the trigger and start working, using tool movements from right to left, keeping the plane of the cutting set parallel to the ground.

When performing the above manipulations, be sure to follow technical safety rules. We are talking about the use of special glasses to protect the eyes, shoes with textured soles that provide good grip on the ground, textured gloves that protect the hands and guarantee an ergonomic fit to the handle, as well as noise-absorbing headphones.

How to mow with a disk or line

A chainsaw equipped with a disc is focused on mowing tall and thick grass, as well as young bushes, as it provides good performance. By the way, the disc does not chop the grass, but mows it entirely, which is especially important when making hay.

But when you need to deal with short growth that needs mowing, it is recommended to use a trimmer with a fishing line. In addition, mowing with a garden tool equipped with a fishing line is much safer than using a knife, since contact with stones preserves the functionality of the unit and eliminates the possibility of injury to the operator.

Lawn trim level

An even more important issue is the height of the cut. Cutting too low can lead to the turf becoming not only vulnerable to weeds, but also to diseases and infections, and if cut low in spring or autumn, the turf may even die. The optimal height for all garden lawns is considered to be a cutting of 4-4.5 cm. This is the minimum height of the grass that can be left during this procedure at the height of the season.

On weakened lawns, during the first procedures in May-June and during the last mowing, it is necessary to leave the grass higher, at least 5 cm (the optimal figure is 5.5-6 cm) and adhere to the standard indicators from the third or fourth to the penultimate mowing.

When adjusting the mowing height, it is also better to take the weather into account, leaving grass up to 6 cm high in drought and heat. The type of lawn is also of great importance. The ground lawn is mowed to a height of 3 cm in summer, and 4 cm in spring and autumn. Sports lawns are mowed to a height of 2 cm and higher.

If, as a result of your absence, you nevertheless allowed the grass to grow, or missed one or more haircuts, then under no circumstances should you mow the lawn as usual. Grass above 10-15 cm in height is first shortened by exactly half, and only during subsequent procedures is it lowered to the optimal height. The same technique is used in the spring, if the first mowing was missed and the lawn has grown above 8 cm.

Lawn mowing has a few more secrets:

For a flawless coat, you must remember to change the direction of the haircut. The more variably you mow the grass, the less monotonous the movements from cutting to cutting, the better results you will be able to achieve. Make it a habit to move while mowing perpendicular to the direction in which you last mowed the lawn. Thanks to this simple technique, you will prevent the formation of hard and thick stems in the turf, which will ruin your grass stand and turn it into a “washboard”.
When cutting rectangular lawns, always start from the narrower sides. But on lawns of round or irregular shape, they first move along the contour, and then from the middle or longest place to the edge in parallel movements, stripes.

Lawn edge care

How to mow lawn grass

This question is worth pondering from the moment you decide to arrange a lawn on your property. The quality of the grass cover will depend on the technique chosen. No matter how much you want, you won’t be able to create a perfectly flat surface using a braid. For this purpose it is better to use special equipment.

Lawn shears

This fairly simple device will allow you to cut grass along the edge of the lawn and in hard-to-reach places, as well as trim a small lawn. However, using lawn shears is not effective because it is time consuming and labor intensive.

Garden trimmer

Garden trimmers are equipped with an electric or gasoline engine. The first of them are lightweight, small in size, but require an outlet and long wiring.

Gasoline cars are characterized by mobility, but are heavier in weight. The trimmer is perfect for cutting grass in hard-to-reach places where it cannot be cut with a mower. Can be used for cutting small areas.

Lawn mowers

Today, there are many models of lawn mowers, differing not only in price, type of cutting element and type of engine, but also in the presence of auxiliary options. Therefore, when choosing a lawn mower, you should take into account engine power, area and shape of the lawn, and a number of other technical characteristics.

Using a manual mechanical lawn mower will allow you not to depend on the availability of energy resources and to carry out impeccable lawn cutting without harming the environment. Sharp knives provide the highest quality mowing, although it is quite difficult to work with.

Electric mowers are easy to use, easy to clean, operate quietly, are relatively safe for the natural environment, and are great for medium-sized lawns. Almost the only inconvenience when using this type of mower is the need to connect to the power supply. An excellent solution for small lawns with a flat surface.

Gasoline lawn mowers are ideal for mowing large lawns of any shape, while they are independent of external power sources. However, gasoline mowers are heavier, more difficult to use, and produce a lot of noise.

For larger areas, there are more complex and larger lawn treatment equipment. As a rule, such machines are equipped not only with blades for cutting grass, but also with tools for aeration and scorification. Some include a garden vacuum function to collect leaves, grass clippings and debris. Machines for cultivating large areas of lawn are called garden tractors.

How to mow with a lawn mower?

Owners of summer cottages, private houses and country cottages often ask the question of how to mow with a lawn mower so that the tool effectively performs its utilitarian functions and serves for a long time. Household trimmers equipped with an internal combustion engine are designed for mowing grass and small shrubs. The package usually includes several cutters, each of which is designed to work with:

Soft grass. In this case, a cutting element is used in the form of a fishing line wound on a drum, moving at a speed of 9 thousand revolutions in 60 seconds.
Rough thickets. Here preference is given to metal knives, each of which is equipped with a different number of cutting teeth.
Dense reeds and young bushes. The ideal option would be discs with 40-80 teeth or four-blade cutters.

Before mowing with a brush cutter, it is recommended to carefully study both the design of the unit itself and the manufacturer’s recommendations for use. By mowing the grass correctly, you can not only achieve the desired result with minimal effort, but also extend the service life of your garden tool. To make the trimmer easier to control, be sure to use the supplied unloading system with a protective pad and length adjusters.

Caring for a mowed lawn

The question arises: what to do with the mowed grass - leave it on the lawn or remove it? On the one hand, cut plants can serve as an excellent fertilizer for the lawn; the nutrients from them will return back to the soil, the spread of moss will stop, and you won’t have to waste time removing grass from the lawn.

However, there is also the other side of the coin: mown grass will lead to the rapid appearance of weeds, the proliferation of earthworms, the surface of the lawn will acquire a porous structure and will be more susceptible to disease, and soil aeration will worsen. Thus, it is better to remove the cut grass after cutting; it is recommended to leave it only in dry weather, so that the necessary moisture evaporates less from the lawn.

Lawn mowing should be regular, then the plants will take a dwarf shape

As for watering and fertilizing, they are necessary to form a thick, high-quality cover, even if you have to mow the lawn more often due to the rapid growth of grass. It’s better to mow the grass more often and end up with a beautiful green surface without bald spots.

Lawn mowing should be regular, then the plants will take on a dwarf shape and, instead of increasing leaf mass, will form more and more new shoots, creating dense turf. If you cut it rarely and immediately short, the grass will weaken and begin to fall out, and in its place separate islands will form, overgrown with weeds, yarrow, moss or bluegrass.

Arranging green lawns at dachas and country estates is becoming a popular activity. At first glance, it seems that everything in this matter is simple: you have allocated a place for a green lawn, sowed the area with grass seeds and wait for the field to turn into a green lawn. And only later does an understanding of the need for proper care come, and this, first of all, lies in the skillful operation of the lawn mower. It turns out that mowing the lawn is not just for beauty.

Typically, lawns are seeded with grasses from the grass family, and mowing prevents them from flowering and fruiting. This simple technique prolongs the growing season of plants, promotes good rooting, growth of lateral green shoots and tillering. Regular mowing helps compact the turf

, and densely growing “cultivated” grass prevents the growth and spread of weeds. Throughout the entire warm period, timely mowing preserves the green color of the lawn.

There is no certainty regarding the frequency of mowing the lawn. This parameter depends on several objective factors:

type of sown vegetation;
type of soil and fertilizing;
weather;
seasonal characteristics of plant growth;
purpose of the lawn.

The first lawn mowing activities begin in the spring, after the grass on the planned sown lawn has risen to a height of 12–14 cm. It is recommended to mow an overwintered lawn when the greenery rises to 7-10 cm. Depending on the intended purpose of the green covering, the grass is mowed to a level of 4-7 cm. Subsequent mowing is recommended each time the grass has risen to a height of 2-3 cm above the desired level .

Features of the situation

Of course, such a question will not arise for those who live in close proximity to the lawn. Then you can wait a while and work when the grass dries. But the need to remove wet grass arises immediately if you can only visit the site occasionally. What to do if you have to mow the lawn on the weekend, on another day with rainy weather, that’s the trick. The opinions of the summer residents themselves differ, so there is little point in focusing on their position. You need to understand the nuances yourself.

READ How long can you mow with a petrol mower?

Which area is the trimmer suitable for? How to choose?

The trimmer is suitable for areas with a significant slope, poorly leveled lawn surface - molehills and tufts of unevenly grown grass, as well as for lawns with a large number of chaotically located bushes. It is also ideal for cutting grass on narrow paths between garden beds.

Cons of trimmers:

the need to collect grass after mowing,
the user must be physically strong,
an inexperienced operator will cut unevenly and unevenly,
the fishing line often breaks, it is only suitable for soft grass; for an overgrown area you need a trimmer with knives.

If you have a limited purchasing budget, you can buy an electric scythe for one and a half thousand rubles, but a low-power one - only 350 W, and the cutting width of such a trimmer will also not please you - only 25 cm. Although such a unit will cope with trimming the grass around flowers and along the fence. For a lawn with an area of more than one hundred square meters, a more powerful device is still needed. The power and type of trimmer cutting element are the most important selection parameters. If the lawn is well-groomed and there are no weeds with thick stems on it, then you can take a trimmer with a fishing line. However, if your task is to maintain an area with weeds in order, then a trimmer with a power of at least 1 kW and disc blades, which will also serve as a brush cutter, is suitable. He can even cope with thickets of old raspberries. The location of the engine also matters. Gasoline trimmers have an engine only at the top, while electric trimmers can have either a bottom or top location. With the top position, you can mow wet grass, but then you need a more powerful engine to eliminate performance losses on the transmission shaft. Thus, the weight of the trimmer increases to 5 - 10 kg, making it more difficult to work with, but they overheat less. Trimmers with a lower engine are the lightest, from 1.7 kg to 4 kg.

Rice. 1. Engine at the bottom: trimmer weight 1.7-1.8 kg, cutting width 23-26 cm.

The weight of the electric scythe is also affected by the shape of the bar. A straight rod is, of course, convenient, but the device becomes heavier due to design features - inside the rod there is a steel shaft-rod, which reduces vibration and increases productivity.

Rice. 2. Straight collapsible electric trimmer rod, includes a knife and fishing line, 1 kW, weight 6 kg.

There is a metal cable inside the bent rods; such trimmers are not designed for long-term load, especially if they are electric. However, you can find fairly light units with a curved rod and a gasoline engine, these can work longer.

Rice. 3. Petrol mower with a bent collapsible rod, no knife, only fishing line, but the weight is only 5 kg.

If your height is non-standard, it is better to take a trimmer with a telescopic rod, then you can adjust its length to suit you. The trimmer handle can be D-shaped, J-shaped or U-shaped, similar to a bicycle handle. The latter type is suitable for processing abandoned areas with tall grass.

Rice. 4. U-shaped (bicycle) handle, power 1 kW, AI-92 gasoline, cutting width with fishing line 43 cm, with knife – 25.5 cm.

For merciless destruction of difficult thickets and even bushes, the J-shaped handle will be convenient because it provides additional support.

Rice. 5. J-handle, 1.3KW power, knife and line.

If you have a lot of bushes and flowers growing on your lawn, then a D-shaped handle will work. Trimmers with such a handle are more maneuverable and suitable for processing hard-to-reach places, although they have less power.

Rice. 6. D-handle, 0.8 kW, line 36.4 cm.

There are also cordless trimmers that are ideal for trimming the grass around flowers and bushes after the main mowing with a lawn mower.

Lawn mowers that run on electricity are unsafe

In order to break down the entire trimmer system, it is rational to divide the device into its 3 components: motor, drive components and control concept.

Gasoline trimmers are quite difficult and cumbersome, for this reason manufacturers are extremely deliberate in organizing controls. In order to remove the load from the hands, a shoulder strap is taken into account. The user's hands control the barbell using a bicycle-style handle. It can be adjusted according to the height of the bar, which is very comfortable.

The most significant control components are the gas and clutch triggers. They are located on the right handle and are associated with clutch devices.

And here is what a petrol interskol trimmer looks like and how it can be used, it is indicated

The operating principle of any type of gasoline trimmer is similar (the types of trimmer will be described below). At one end of the trimmer there is a working part in the form of a screw-shaped knife, a fishing line. At the other end there is a fuel tank with oil and control buttons. To operate a gasoline trimmer, the composition of fuel and oil is used.

One of the functions of the trimmer is the practical starting of the engine using a special spring starter. Numerous modifications of the device allow changing attachments, which has a positive effect on the efficient operation of the device, especially for owners of areas with high vegetation.

An important element of the device is the anti-vibration system, which reduces the load on the joints of the shoulder and hand. It is very bad when such a function is not in the device, because when working, a person will quickly get tired and his limbs will hurt. But what is the best gasoline grass trimmer and what parameters to choose it from, this will help you understand

We all know that you should not swim in a river, pond or sea during a thunderstorm. But why then use an electric lawn mower on a wet lawn? Indeed, in this case you also risk receiving an electric shock. When you cut wet grass with an electric mower, there is a risk of damage to the mower due to exposure to moisture. It could also potentially injure the person operating the mower.

Those who have ever tried to mow grass in dew or drizzling rain have noticed that the vegetation stuck to the blade on the spindle is scattered in heaps across the lawn. If they are not removed promptly, then bald spots appear in the places where wet grass falls on the lawn. The mown piles begin to rot and the lawn begins to hurt. This is how unsightly bald spots appear.

So, dear readers, decide for yourself whether it is possible to mow wet grass with a trimmer and lawn mower, if, despite this, you want to put your lawn in order before the onset of cold weather.

Arranging a suburban area (and even a local area in the city) is a very difficult matter. Especially because you have to take care of the household constantly. Many people also have questions about how to do this or that job, for example, is it possible to mow wet grass with a trimmer.

Selection Basics

Knowing the difference between a trimmer and a lawn mower, it is much easier to understand which tool is best to choose for each specific purpose. The difference between these tools is obvious.

Lawn mowers are essential for owners of flat lawns that occupy large areas of terrain. It will be easier and more convenient to use than a trimmer if we are talking about an area of more than 10 acres. However, we must not forget that in this case there will almost certainly be areas that are difficult to reach. A lawn mower is of little use in such a situation, so you can’t do without a trimmer.

In addition, the consumer must decide whether he will need a gasoline or electric device for work. You need to take into account the area to be processed, as well as the resources on site. Both the lawn mower and the trimmer come in both variants.

The type of lawn mower is also important. “Ride on” will be relevant if the cultivated area occupies more than 20 acres. A self-propelled mower, which usually has a power of up to 4 liters, can handle a smaller area perfectly. With.

When it comes to buying a trimmer, users believe that the situation is much simpler. Most often, they opt for a universal gasoline model, capable of performing work both with a fishing line and with steel knives. The fact that the engine runs on gasoline allows the unit not to be tied to any terrain, since it does not require power from the electrical network. However, you need to take into account that its maintenance will be a little more difficult.

For user convenience, when processing areas larger than 15 acres, it would be optimal to have both a lawn mower and a trimmer on hand. To keep a small area in order, only a trimmer will be enough.

What is better to choose - a trimmer or a lawn mower, see below.

Operating principle

Considering the way the trimmer works, it looks like a hand strap. The difference is that it is equipped with a motor, with its help the cutting element rotates.

Manufacturers produce the following models of mowers:

On which a gas engine is installed. Such garden tools have a fuel tank, this is their distinctive feature.
Devices with an electric motor. These tools are lighter because they do not have a fuel tank. But when choosing such models, you need to take into account that you need a power source to work with them.

All electric braids can be divided into those that operate on batteries and models connected to the network. Each review has its own characteristics, but they affect the power supply. If you don't take that into account, the rest of the design is the same across devices.