Due to their excellent quality, power tools produced by the Japanese brand Makita are highly appreciated by experts. This leads to an undesirable effect - there are a large number of low-quality copies of popular screwdrivers and hammer drills on the market. Buyers of Makita products need to know how to distinguish the original from the fake.
We recommend purchasing original Makita tools here
Counterfeit products have quite a lot of signs by which they can be distinguished from a branded product, but not all of them are obvious and clearly visible. Sales specialists and craftsmen who intensively use power tools can accurately identify a fake. Ordinary buyers should carefully inspect the device itself, the packaging case, and the attached documents.
Where are Makita power tools made?
Since Makita brand products are manufactured under license in several countries, you need to know how to identify factory production by the number indicated on the device and distinguish it from the work of a private entrepreneur. The country of manufacture will be indicated on nameplates attached to the tool body and storage case
The manufacturer Makita does not manufacture tools in the CIS.
Original markings and countries where they actually exist:
| Marking | A country |
| A | USA(USA) |
| D | Germany (Deutschland) |
| E | Japan |
| G | Great Britain (GB) |
| R | Romania |
| Y/K | China(China) |
It is generally accepted that the bulk of counterfeit devices are produced in China. This is true, but screwdrivers manufactured under license in Chinese factories are of high quality and are considered original products. Their main difference from the products of European manufacturers is the absence of double quality control.
Nowadays you can find “gray” models of electrical appliances on the market. They are original, but not all markings are present. The main difference is that such Makita tools were imported into the country illegally. Even though they are authentic, these models are not supported by the manufacturer. Therefore, there will be no warranty repairs.
Hammer Makita Hr2470 How to Recognize a Fake
How to distinguish
fake Makita 2450, 2470 rotary hammer from the original. Makita 2470 equipment
Content
Rotary hammer Makita (Makita) HR2470. properties, reviews
A hammer drill is a construction tool for drilling and drilling holes. Does a wide range of work, starting with the creation of ordinary holes and ending with the dismantling of walls. An indispensable tool in the kit of any builder or repairman.
Table of contents:
- General description of Makita rotary hammers
- The main properties of Makita rotary hammers
- Description of the Makita hammer drill (Makita) HR2470
General description of Makita rotary hammers
The history of the Makita company goes back almost 100 years. The manufacturer’s product line includes a huge number of tools, but rotary hammers occupy a leading position among them in terms of the number of positions presented. Among them are models with mains power and battery power.
Based on functionality, devices are divided into models with one mode, 2 and 3. At the beginning, only hammer drilling is performed, in the 2nd, the function of an ordinary drill is added, in the 3rd, it is likely that the operating modes remain to be done by our client. Also, models of rotary hammers differ in weight into light, medium and heavy. The light category is devices that do not exceed a weight of 3 kg; they are suitable for performing small household jobs. Medium – up to 5 kg, these models are suitable for working with hard materials. Heavy category - from 5 kg, performs the function of a jackhammer.
Makita devices are divided into two types according to the fastening of equipment - SDS-Plus and SDS-Max. SDS-Plus cartridges are installed on hammer drills of lightness class 1 and 4.5. They are suitable for drilling holes up to 30 mm, in other words for the purpose of increasing holes with a hollow core drill up to 68 mm in concrete and 80 mm in brick. Heavy-duty third-class rotary hammers are equipped with SDS-Max cartridges. Suitable for drilling holes up to 52 mm, working with hollow cores up to 160 mm.
The placement of the engines in the device also differs, which can be vertical or horizontal. Vertically located engines give the device a longer operating life, which is justified by certain design features. Such devices have a gearbox that reduces the load on the motor. In this modification, the engine has a huge area, which facilitates its best cooling. The advantages of a horizontal motor arrangement are the smaller dimensions of the device, a conventional shape, comfortable for domestic use.
The main properties of Makita rotary hammers
Impact energy - this indicator is measured in joules and determines the ability to work with certain materials. The higher this number, the more dense the surface it will drill without harming the mechanism. Also, the power indicator characterizes the time of continuous operation, in other words, determines the speed of work performed. More than just the weight of the hammer drill, the more powerful the motor is installed there.
The idle speed determines the functionality of the model and the use of additional accessories. Makita produces a wide range of models with variable speed control. It is set depending on the type of material being processed and the size of the drill. The speed is changed manually by pressing a button, or, in other words, by programmable switching of modes.
Description of the Makita hammer drill (Makita) HR2470
The Makita hammer drill (Makita) HR2470 is a semi-professional device and does drilling, crushing or drilling with impact. The hammer drill operates from a constant voltage source. The device is equipped with a coupling that protects the mechanism when the drill jams. With a wedge, the drill does not move jerkily, but glides. The device is lightweight and easy to maintain, equipped with a system for protecting the carbon brushes from small debris. There is a reverse system that turns the drill in the opposite direction; this function helps in unscrewing bolts.
Distinctive features of the Makita hammer drill (Makita) HR2470:
- The presence of a protective cartridge that protects the mechanism from dust.
- Torque in reverse and standard direction has similar power.
- The presence of a release clutch to protect the mechanism when the drill is wedged.
- Chisel with 40 positions.
- Switch with lock for work.
- The handle has a rubber insert; the device does not slip in your hand during operation.
- Hammer power – 780 W.
- Drilling on steel, concrete or wood – 13/24/32 mm.
- Crown for drilling – 65 mm.
- Idle speed – 0-1100 rpm.
- Beat frequency per minute – 0-4500.
- Impact energy – 5.7 J.
- Vibration during drilling – 15.5 m/s2.
- Vibration during chiselling – 12.5 m/s2.
- The size of the device is 370x84x214 mm.
- The weight of the device is 2.7.9 kg.
- Wire length – 5.5 m.
READ How to sharpen a hedge trimmer blade
Makita HR2470F cost, properties, video review, reviews
Here you need to watch the video of the Makita HR2470F rotary hammer, read and share reviews, find out the properties.
Properties
Check with your dealer for specific properties.
General properties
Functions and abilities
Additional Information
Check with your dealer for specific properties.
Makita HR2470F Forum
Popular articles
Makita rotary hammer. models HR 2450, HR 2470, HR 4001c, HR 3200c, HR 2450×8, HR 5001c, spare parts for hammer drills, video
Among the tools, the hammer drill is powerful and reliable, just like other products of this brand that our client can do. Almost everything it has in common with an impact drill, however, some operations can only be performed by a Makita hammer drill due to its special design. In detail, the hammer drill can be correlated with an automatic tool and an impact drill. The low recoil of the tool and the highest speed of operations make it irreplaceable.
What you need to know when choosing a hammer drill for yourself
When choosing a hammer drill for work, you should know that this is a motivated tool used to destroy or perforate hard materials - concrete, stone. Its working body is a drill, as other special devices also call it. They differ from a drill in place of a specially designed shank that secures the drill in the hammer drill chuck. The drill cannot be inserted into the drill.
In addition to the functions that a high-power impact drill does, the Makita hammer drill is indispensable if necessary:
- punch holes in reinforced concrete, passing through iron reinforcement;
- Using different shapes of working heads and chisels, an opening is made, or a groove is also called, in a solid block.
Select a hammer drill based on technical parameters. The stronger and heavier the tool is, the more work it will perform. Makita rotary hammers with a power of 0.8-1.5 kW and a weight of 2-12 kg are characterized by:
- power;
- frequency of blows and their strength;
- the largest diameter of the holes being made;
- Is there any possibility of reverse and adjustable rotation speeds;
- cartridge type;
- presence of blockages.
It is considered correct to choose a tool for a certain type of work. A screwdriver will be used to tighten the screws, and an impact drill will drill holes for hanging strings in the apartment. A hammer drill is needed where slotting work in hard material predominates.
A professional tool from a well-known manufacturer cannot be cheap. But the cost of a Makita rotary hammer depends on many characteristics. So, buy the HR2470 model, a favorite in many ratings, for seven thousand, while the HR 5001c, equipped with new options and functions, is estimated at 45 thousand rubles.
The cost of the tool is possibly significantly lower if the production site is located in China. These are official Makita assembly sites, but assembly costs are lower and there are fewer levels of control. Find out where the hammer drill was made, of course, on the label where the country of manufacture will be indicated:
- A – made in America;
- D – Dolmar plants, Germany;
- E – Japan:
- G – England;
- Y,K – China;
- R – Romania.
Our client is left with hammer drills that are legally supplied to the market and have an additional Russian marking for passing control - HCN.
Products collected in handicraft workshops differ in packaging, appearance, and price. Let's look at examples of Makita rotary hammers that have earned recognition.
MAKITA fake or original
The video tells how to distinguish a Makita hammer drill
original from
fake
. Where to pay attention.
Rotary hammer Makita HR2470. Fake and original.
External differences of the unusual Makita HR2470 rotary hammer
from
counterfeit
. What remains for our client to do: questions about the place of operation of the Makit tool.
Rotary hammer Makita HR2450
The device hasn’t left store shelves for just 10 years, it’s needed and users have only positive reviews of it. Despite this, this is a relatively cheap model in the Makita rotary hammer line. The equipment is moderate - in addition to the strong case, there is an additional handle, a depth limiter and an annotation in Russian.
The tool has 3 functions:
- drilling - drill;
- hammer drilling - impact drill;
- impact crushing - jackhammer.
Due to the fact that it is equipped with a chuck that accepts an SDS plus drill, the scope of work is limited by the attachments used.
Integrated electronics regulate the rotation speed by sensing pressure on the trigger. rotary hammer is characterized by ease of process control and reliability. The use of 40 positions of angular attachments with which the tool works makes it a universal tool. According to reviews, such a tool works in the palm of a specialist for a couple of years, changing only consumables.
The release clutch ensures slippage during start-up, preventing jerking. When the strip is de-energized, the accidental start blocking system is activated.
The only drawback eliminated on subsequent models is the lack of anti-vibration protection.
Rotary hammer Makita HR2450 X 8 (SDS)
The unit is used for processing non-ferrous metals, steel and high-strength concrete. It has 3 operating modes - impact, drilling and impact drilling. The motor power of 0.78 kW provides an average load. The motor cooling system allows you to work more actively even in dusty conditions. The unit operates from the mains or an independent power source. Using an SDS chuck, the tool works with chisels and crowns, drills and augers on all types of materials, including drywall.
READ Hammer Drills But Doesn't Chisel
The permissible drilling diameter is from 13 mm for steel to 32 for wood.
The release clutch eliminates the reverse impact if jamming occurs. Rubberized handles dampen vibration and comfortably hold the tool in each position. The delivery set of the Makita HR2470 rotary hammer includes 5 drills with a cross-section of 8 mm.
Rotary hammer Makita HR2470
The improved device is reminiscent of the HR2450 model, beloved by craftsmen, with a more massive engine. In terms of its consumer qualities, the tool is a leader among 2021. The advantages over the principles of models are considered to be protection from dust. Because of this, the tool has a long service life and increases the service life of the motor's carbon brushes.
The Makita HR2470 rotary hammer is equipped with adjustable rotation and impact speed, and reverse.
The bits are installed at the required angle, freeing the operator from control. If necessary, modernization of this tool involves the creation of illumination and the use of quick-release chucks.
Rotary hammer Makita HR4001c
The modernized model of the rock drill has increased drilling efficiency by a third, and the working life has increased. Modern design directs the attention of the buyer. A successful grip due to the additional handle on the left helps you keep the process under control and get less tired. The Makita HR 4001c rotary hammer operates The tool is heavy, 6.3 kg, and very powerful 1.1 kW, it perfectly penetrates the structure of the structure. The design uses an SDS max chuck, has a depth limiter and an electric speed control system.
Additional functions used in the model;
- slide switch;
- soft start and shock protection when jammed;
- electrical speed control;
- vibration protection;
- safety clutch.
Two functions - impact and rotation with impact - massively and perfectly ensure the process of destruction of structures, drill concrete with a crown, creating a passage in the wall with a cross-section of up to 105 mm.
Additionally, it must be said that this model is produced in England and China.
Rotary hammer Makita HR3200c
During the modernization of the basic model, the hammer drill increased productivity by 30%. During the reconstruction, the consumer properties and cost of the Makita HR 3200 c rotary hammer increased. Now the model has improvements to the device:
- cartridge of the accounting software complex SDS plus conical;
- precise speed control;
- comfortable switching to any of 3 operating modes;
- improved armature insulation for heavy-duty work;
- “soft shock” at idle;
- indicators of malfunction and wear of graphite brushes.
Upon completion of the reconstruction, an effective productive tool emerged. Weighing 4.4 kg, it provides an impact force of 5.5 J with a frequency of 1650-3300 blows per minute. The 850 W engine is equipped with a forced cooling system.
The very comfortable rotating handle provides a good grip for the operator. The main handle is closed, the start button is possibly fixed for long-term operation.
Rotary hammer Makita HR5001с
The hammer drill was determined to be the best professional hammer drill among massive tools.
Makita HR5001c. It received 10 out of 10 points, despite the stated cost, 34,320 rubles. The unit is designed for extremely complex work in its sector.
- power – 1.5 kW;
- weight – 12 kg;
- speeds – 1;
- the diameter of the hole in concrete with drilling is 50 mm, with a crown – 160 mm.
Users note the reliability of the hammer drill when laying engineering lines. Users warn that the most powerful unit must be held with both hands during operation. Options include good regulation, vibration protection, and a wear indicator for graphite brushes.
How to purchase consumables and spare parts for a Makita rotary hammer
It is more reliable to receive spare parts from Makita dealers. In this case, introducing a network of service centers and ordering spare parts via the Internet will protect you from purchasing counterfeits. The warranty on branded rotary hammers is given for a year, and during the myth period no matter what kind of damage to the tool is repaired free of charge.
Makita HR 2470 rotary hammer review - video
Rotary hammer Makita HR 2470. Makita (hammers): expert reviews
When home craftsmen imagine a hammer drill, they probably see a tool designed for long-term and professional use. In fact, this is only partly true, because this device can now always be found not only in the arsenal of a specialist, but also in a person who uses such equipment periodically. However, it is important to choose the right model that will meet your requirements for power and performance.
Hammer or drill
If you are faced with the task of long-term drilling of hard materials such as stone and concrete, then you cannot do without the described impact device. If you want to choose a similar unit for yourself, you need to be prepared for the fact that its cost is slightly higher than an ordinary drill, because in terms of technical features, rotary hammers are superior to household tools for performing drilling. This is further explained by the fact that the impact function of a drill is implemented as an additional one, whereas in the image of a hammer drill it is the main one.
READ Is it necessary to lubricate the Hammer Drill?
Before purchasing a hammer drill, you should decide what its purpose is. For this reason, power and technical properties directly depend. As an example, there is an option to look at the Makita 2470 rotary hammer, expert reviews of which will be presented in the text of the article.
What do the experts say?
When craftsmen examine the above-mentioned hammer drill model, they especially note that there is double protective insulation here, which today is called the main advantage. There is an option to work using a Makita 2470 rotary hammer (original), setting the tool in the jackhammer or drill mode. In reverse, which implies reverse rotation, the motor, as the masters emphasize, operates at the same speed and torque. When reactive torque appears, a limiter is used in the tool.
Why choose this model?
Experts in the field of construction note that the Makita 2470 rotary hammer is essentially a tool where the carbon brushes and armature, as well as the internal parts, are protected from dust, which helps to increase the service life. You can drill concrete using a diamond core bit, and you will get a 65mm hole. When using crowns with carbide cutters, this popular rumor parameter will be reduced to 54 mm.
Reviews from professionals about technical properties
If you want to purchase a Makita 2470 rotary hammer, you should look at the photo and study in detail the views of professionals about the technical properties. Among them is that the number of modes, which is three, is quite enough for comfortable work, as well as a power of 780 W. The highest impact force is 5.7 J, while the spindle speed varies from 0 to 1100 per minute.
Experts note that the dimensions of this hammer drill are quite small, they are 370x84x214 mm. It is important to note the capabilities of the tool. For example, using a drill, you can drill a 24mm hole in concrete. As for the wood species, the hole has a diameter of 32 mm. It will not be difficult to drill a 13mm hole in metal, which you will definitely like even smaller.
The Makita 2470 rotary hammer, reviews, properties of which can be found in the text of the article, is an equipment that does not have a drill chuck and vibration protection. These two features can be called advantages. But the equipment has a safety clutch and also adjusts the rotation speed.
You need to find out that a brick can be drilled simply using a crown; the diameter of the hole will be impressive and will be 50 mm. If we turn to the experience of experts, we can find out that the weight of this equipment is quite small and is only 4.6 kg, which will not put a very large load on your hands. Model 2470 (Makita). This is an instrument that is characterized by a certain blow frequency; this parameter varies from 0 to 4500 per minute.
Expert reviews about the features of the rotary hammer
Before purchasing the equipment described, you definitely need to familiarize yourself not only with the views of consumers, but also with highly qualified workers. You can learn from the latter that the equipment differs:
- versatility;
- full reverse;
- comfortable holding;
- adjustable hole depth.
The first quality is manifested in the range of comfortable switches, so you can easily use one of the operating modes, specifically speaking: impact drilling, drilling, or chiseling. Model 2470 (Makita). This is equipment that is comfortable to work with, according to experts. This is facilitated by a comfortable handle, which is ergonomic and has 2 rubber pads with protrusions and a stop. This element prevents the tool from slipping out of your hands. Don’t be afraid to make careful holes of the required depth, because for this purpose the tool contains an adjustment system. The limiter will allow you to carefully handle the service.
Consumer reviews about the main advantages
Among buyers, the model described in the text of the article is quite popular, this is justified by certain features. They are expressed in an assortment set that allows accounting (software) for dust removal, a torque limiter, electrical speed control, and double protective insulation. Buyers especially note the long-lasting firing pin. During operation, the tool does not heat up, which indicates its top-level quality and the intense cooling of the motor. It is often possible to hear the opinion that equipment of this brand is used even when renovating apartments. Over a period of a couple of years, in this case, the instrument can demonstrate its positive properties.
Model 2470 (Makita) is beneficial for installing plasterboard ceilings and arranging hanging systems, because the equipment is lightweight and can work even in brutal conditions.
Makita HR2470T cost, properties, video review, reviews
Here you can watch a video of the Makita HR2470T rotary hammer, read and share reviews, and find out its properties.
Properties
Check with your dealer for specific properties.
Source
Purchase rules
You should purchase a Makita screwdriver only in specialized stores at the price set by the manufacturer, which can be found on the company’s website. This is the only way to buy products from a Japanese brand without doubting their origin. In other cases, you need to make sure that the product corresponds to the specified labeling.
It is important to understand that high-quality items cannot be sold at too low prices. Therefore, you should not believe sellers on the market and online services about warehouse sales or seasonal promotions, thus explaining the reduced prices for Makita brand products.
Types of fakes
It is not always possible to understand at first glance that this Makita tool is a fake.
It's all about the copy level. There are devices whose differences are minimal. And there are products of a frankly low level of execution. The only thing they have in common with genuine devices is the name on the packaging.
In fact, there are 3 types of fakes.
Illegal products
. These are not copies. These are original instruments, but intended for sale in other countries. They do not undergo official certification in the Russian Federation. Even though these are genuine devices, they are not covered by warranty. Plus, Makita for the same USA is designed for a different voltage and power supply parameters. If you connect it to 220 V in Russia, the instrument may burn out.
Good quality copies
. These are already fakes. But they are made with high quality. Sold at a price slightly lower than the original. There are good quality specimens. But they don’t reach the level of a real Makita. There is no guarantee, service will refuse service.
Cheap fakes
. Chinese consumer goods. Externally they pass off as original. In fact, the tool is assembled from cheap consumables. The Makita brand is being defamed. A superficial inspection makes it clear that this is a fake. They work for a minimum of time and then burn out.
That is, even a high-quality copy does not provide any guarantees.
And it’s unlikely that a person will want to spend money on Makita and get a pathetic parody instead of a well-known brand.
Check Makita tool by barcode:
Enter 13 digit barcode:
Start simple. There are 3 key points:
- Price
. The popular brand has earned trust and is also in demand. By definition, a tool cannot be cheap. High quality, good components, etc. If they offer a device whose cost is noticeably lower than the market average, this is a reason to refuse. 99% fake.
- Labeling and manufacturer
. The company's factories are located in different countries. These are the USA, China, Great Britain, Romania and Japan. Assembly is not carried out in Russia, nor in the CIS countries. If you see a different country of origin, it is a fake. - Assembly
. This is a whole complex of signs that need to be considered separately. But at a minimum, the power tool should be free of defects and obvious flaws. Plus, take into account the presence of a pronounced unpleasant and chemical odor. High-quality raw materials cannot smell like that.
To avoid any questions about how to spot a fake Makita, choose the right place to buy. These are official dealers and brand stores.
It is not worth buying Makita in transitions, in electrical goods markets and through dubious sites. The bulk of counterfeit instruments are distributed through them.
External signs of original and fake
It is not difficult for the trained eye of experts to identify an imitation, even if it is very similar to a branded product. A branded item gives the impression of good quality and ease of use. It is distinguished by high-quality polishing of surfaces, smooth lines, careful fitting of parts, carefully executed inscriptions, evenly glued information tags.
Experts advise paying attention to the following points, common to all Makita brand models:
- The original plastic suitcase is additionally packed in a cardboard box, which contains information about the manufacturer and the screwdriver.
- The color of the suitcase matches the color of the tool, the latches are black, and there is a specific place for each part. If you come across a seller at a bazaar or on the Internet who offers Makita without a case, refuse immediately. And it doesn’t matter what excuses he comes up with. A case is required.
- On the surface of the case there will be an inscription with the name of the company and a sticker indicating the EAC certification, markings and serial number of the tool. The manufacturer's name is embossed. The letters are embossed on plastic. If you only see a sticker or raised letters, then it is a fake.
The fake ones only have a sticker with the name on the case. This fact can be easily verified. Take a knife or tear off the sticker with your fingers. If the sticker has come off and there is nothing underneath it, no embossing, then it is 100% fake.
- On the original case, the latches are also embossed with the Makita brand name. Plus the latches themselves are glossy. The copies have nothing written on the latches. Bare plastic. The material of the latches itself is matte.
- The original charger consists of two parts - a control unit and a charging unit. For counterfeiting, another type of charger is used, combining the charging unit with the control board.
- Gaps. The suitcase has gaps between the elements. In genuine cases, the gap is uniform and of the same shape everywhere. Or the parts fit tightly together. The fakes have crooked gaps and are frankly handmade.
- Backlash. A real suitcase from Makita has no play. The parts are held firmly. The copies rattle and move to the sides. The backlashes of the original are made of very high quality, without dirt. A fake cannot boast of this.
Appearance of the Makita HR 2470 rotary hammer. Label
On the bottom of the motor housing there is a label with the serial number of the device and the date of its manufacture.
The number has seven characters. Fake
has eight rooms.
Additionally, the letter "Y" is written on the original label in the lower right corner. A sign that the hammer drill is produced specifically for the Russian market at the company’s Chinese plant. There can be no other letters.
Please note that the font of the labels is also different.
Frame
The body of the original instrument is made of plastic parts. The material is soft, pleasant to the touch, high-quality polished. There are no pieces of plastic or raw edges protruding anywhere. All parts are connected firmly, without gaps. The round body elements are smooth. Plastic fake Makita HR rotary hammer 2470
rough, some parts don't fit well.
The gearbox housing, like the hammer drill handle, has rubberized inserts. They are made of high quality and soft rubber. The fake rubber is much rougher and harder.
On the plastic part of the case there is a three-dimensional Makita inscription, it merges with the case. The same inscription, but already embossed, should be on the back of the rubber housing of the original rotary hammer gearbox.
Logo
The Makita logo on the body of the tool should be pasted over the body, and not pasted on top.
READ Drill Button With Speed Adjustment
The same inscription should be on the rivets of the case. Only here the letters should be squeezed into plastic.
The body of the tool must be marked with the EAC certification, marking and serial number of the tool.
The logo was also present on the removable hammer drill handle.
Learning about power tools
The next step on the path to identifying a fake Makita is to study the electric tool.
Nameplate
Each device has an information label. This is a data plate. The copy is poorly made, has different fonts, misspelled words, blots, blurred ink, and other signs of poor copying. The original nameplate is made in the form of a metal insert. For some copies this is a paper sticker.
The original has the Makita lettering in a duller color. While the fake one really hurts the eyes with its bright red color. Now regarding the markings:
- On real nameplates, the serial number of the device is located next to the model brand. In fake ones, the location of the production number is below the table;
- On genuine Makita devices, the table contains markings for use;
- The Japanese manufacturer on original instruments is indicated as follows: Makita Corporation Anji, Aichi, Made in PRC. In fakes, the last inscription is missing, or has other letters - China, Malaysia.
Serial number
It is always located near the model brand on the nameplate. For fakes, the serial number is written at the bottom, under the plate.
Manufacturer
As a manufacturer, they always write something like this - Makita Corporation Anji, Aichi, Made in PRC If you see a different name, then leave the store. It's a copy. Just keep in mind that the country of origin may change.
Nowadays you can find “gray” models of electrical appliances on the market. They are original, but not all markings are present. The main difference is that such Makita tools were imported into the country illegally. Even though they are authentic, these models are not supported by the manufacturer. Therefore, there will be no warranty repairs.
How to spot a fake
We recommend purchasing original Makita tools here
The original product is equipped with a lithium-ion battery with a marking sticker. One screw will be sealed, high-current elements are supplied by Sony or LG, the battery power is 10.8 volts and the capacity is 1.5 Amperes per hour.
The Chinese fake is equipped with a battery of a different power, and there are no stickers on it. Counterfeit batteries resemble batteries for household flashlights.
The original has a charge indicator, the indicator can be seen after pressing the button. The battery fits well and installation is easy.
The appearance of the fake product, at first glance, differs little from the original, but there are some small features:
- The body color has a bluish rather than greenish tint.
- The color of the force adjustment scale is gray, not black.
- Double coupling cartridge.
- The counterfeit handle is made of hard plastic, while the original handle has rubber inserts that increase ease of use and anti-vibration properties.
- The original pen has a number on it that is not on the fake.
- The original power cable is made of flexible and durable rubber, the parts are well secured, and the plug has a characteristic “expensive” look.
- A tag with information about the product is stuck on the fake, and on the original the serial number is stamped with the obligatory indication of the production date.
- The hook for attaching to the belt on the fake is installed only on one side, but on the original it is provided for fastening on both sides.
How to distinguish a Hitachi rotary hammer from a fake
The original Hitachi rotary hammer has the following distinctive characteristics:
- The surface of the case is smooth, the lid is high and fits tightly, there are no cracks or gaps when closing it. The bottom of the suitcase is figured.
- On the back of the cover there are rubberized inserts designed to secure the tool.
- The factory case has the Hitachi lettering in white, embossed or indented.
- There are molded inscriptions on the body of the hammer drill and the additional handle. There are no irregularities or burrs.
- The length of the network cable is at least 3 meters.
If at least one of the criteria does not meet, then we can say that this is a fake. Counterfeit power tools from well-known brands are somewhat cheaper, however, by purchasing a counterfeit tool, you deprive yourself of the opportunity for long-term and convenient use of the tool, as well as warranty and post-warranty service. To avoid such problems, it is better to study the offered product in detail and make sure of its originality.
Popular fake screwdrivers
Most often, scammers counterfeit the most popular models of Makita brand screwdrivers and hammer drills. Compared to the originals, Chinese fakes remain operational for 1-2 weeks, so it is advisable to avoid such situations and carefully check the device.
A characteristic feature of imitation is the difference in the indication of the power of the device:
- The original Makita df330dwe is designed for a power of 10.8 Volts, while the counterfeit version is rated at 12v.
- Makita DF457DWE and DF331DWE drill-drivers can be distinguished by their power ratings of 24 Volts and 18 Volts.
A distinctive feature that characterizes counterfeit screwdrivers is that they indicate Japan as the country of origin, not China.
Video: how to distinguish a fake from an original Makita
How to distinguish a genuine Makita power tool from a counterfeit one?
In this article we will try to give a clear answer to this question, to name the real signs of real quality for a professional tool from a real Makita . Having recognized them, it will be easy for you to make the distinction between a real high-quality Japanese instrument, manufactured by this manufacturer according to all the samples and requirements of the modern standard, from its counterfeits, made in an artisanal way without observing even the most basic quality standards in work.
The most counterfeited, which means popular for their quality, were the Makita DF330DWE series drilling machine models.
Typical fake DF330DWE
Typical fake DF330DWE
Original Makita DF330DWE
Original Makita DF330DWE
This model is produced at 10.8 Volts in the original, while in the fake it is usually 12 Volts. As it turns out, the counterfeit batteries and charger are so different from the original that it’s hard to make a mistake, but still hundreds of buyers are faced with buying this counterfeit every month. According to people's stories, the fake lasts 1-2 weeks of short work. It is very easy to save yourself from purchasing such a tool; they can only be purchased from official Makita dealers and their representatives.
The next equally popular counterfeit models turned out to be Makita DF457DWE and DF331DWE seeders and screwdrivers.
Typical fake DF457
Typical fake DF331D
Original Makita DF457DWE
Original Makita DF331DWAE
These models DF457D 18V and DF331D 10.8V are made in the original, whereas they are usually 24V counterfeit. Counterfeit batteries and charger are very different from the original. The visual difference between the tool and the suitcases is also clear, just take a closer look. This is not Makitov’s quality at all. All of these fakes have a distinctive feature; they indicate the country of origin, Japan, which is not typical for these models, which are produced in Japanese factories in China.
Such a model. They had a sign with signs glued on them “upside down.” Then more “neat” fake hardwood floors appeared, but they also had a clear visual difference from the original ones. The handle of a real circular saw always has Makita inscription on it, but fake ones. No.
The “inside” of fake parquet floors “gives itself away” even more clearly: on the fake armature the uneven and rough balancing is quite noticeable, and the protective fill (to prevent the turn of the turn on its winding) imitates a low-quality craft “varnish” of blue color, which Makita never uses in its products NOT used. Left Saw 5704 Brush Holders differ from the real thing in that the fakes are very shiny and the fake carbon brushes do not have the required "303" marking. These numbers are assigned to brushes installed by the government on this Makita model. The fake impeller on the 5704 saw does not have any inscriptions, but the original Makita impellers always have them.
READ The Difference Between a Drill and a Screwdriver
The next type of tool, which, thanks to the quality from MAKITA, “earned” mass counterfeiting, turned out to be a manual hammer drill
HR2450 models. Fortunately, he also discovered striking differences in appearance between the genuine and the counterfeit. The original Japanese rotating hammer of this popular model has a rubberized handle, and for fakes in its place there is simply black painted low-quality plastic. We have repeatedly observed cases where such handles burst in the unfortunate owners of counterfeit drills after the first ten minutes of work. There is no CE mark on the plate of the “left” seeders, which is required by all European standards, which once again confirms the “Asian” homeland of such counterfeits. They also do not indulge in serial numbers in the “Asian style” with their variety. As a rule, they use a stamp with a single number 0093508Y, and under the fake button on the body of these hammer drills there is no year of manufacture of the MAKITA tool. In a drill-hammer, like a saw, there is a fake “filling”, showing itself to be the head of the wires of a real switch should be of different colors, but on a fake they are all white. The drummer of fake hammer drills also has his own “special” palette. The rubber rings here are painted green by the scammers, while on the real Japanese MAKITA they are always black. Carbon brushes of copy drills, as on “left-handed” saws, differ from real ones in the complete absence of any markings. After all, a fake manufacturer doesn’t care how you start replacing them with new ones when they wear out, how you choose them without numbers on them. The barrels of fake hammer drills are not even polished after milling.
Well, in the end, the MAKITA tool, whose well-deserved popularity was encroached upon by manufacturers of counterfeit junk, became an angle grinder for a 230 cut wheel, as a rule. Models of the 9069 series. And here you can really spot a fake: there is always an inscription on the “original” Makita gearboxes, but this is not the case on the fakes. Inside the fake grinders of this model, you will again find carbon brushes without any part numbers. Since 2005, in real Japanese grinding machines of this model, the bearing housing began to be assembled with hex head screws, but on fakes, production with screws according to the usual Philips standard is still “in progress.” The spindle shoe on the fake 9069 series angle grinders shines brightly, but on the real Makita model of this angle grinder it makes it matte. The protective filling of the armature winding is again modeled with craft varnish. Such a “fake” protection, of course, will not protect it from damage from flying dust and abrasive shavings, and will not prevent a short circuit in the rotation.
We would like to wish you that, knowing all these signs of shameless counterfeits that encroached on a reliable and famous Japanese instrument, you will still never find them yourself, bought with your hard-earned money.
Sources:
https://kakotlichit.Ru/tehnika/tools/perforator-makita.Html https://makita.One/new-fake/
Popular fake hammer drills
Chinese manufacturers often counterfeit Makita 2450 and Makita 2470 rotary hammers. Imitation is determined by the following general characteristics:
- sloppy execution, unacceptable for a branded product;
- bluish tint to the body and case, not greenish;
- absence of raised inscriptions with the brand name and presence of stickers.
Experts may notice other differences:
- The fake Makita 2450 does not have an inscription on the black part of the case, and the inscription on the green part can be removed without much effort.
- There is no inscription on the side handle, although it was indented on the original.
- Mode switch symbols should be convex and neat.
- The original Makita 2470 has two inscriptions on the side handle - raised and depressed letters, but the fake does not have them.
