Chain Stil for Rip Sawing

Recommendations for use

The assembly of the STIHL-180 chainsaw is done using the latest technologies, which ultimately allows you to obtain a high-performance tool. As users say, it is comfortable to use for sawing any kind of wood. The instrument is very comfortable to hold and starts quite easily. Among the main disadvantages, users note a fairly rapid fuel consumption, as well as wear and tear on some parts that are made of plastic. But this drawback cannot be called critical, because the unit is intended for personal use, which does not involve unnecessary loads. All users who received this equipment several months ago note that during this time they managed to process about 4 cubic meters of fresh wood, including pine, birch and aspen. The saw shows good results when performing tasks, and you can operate the equipment for several hours in a row.

Refueling system, fuel

For quickly refilling tools without pouring. For STIHL combustible cans, STIHL petrol cans max. up to 5 l. Used on tanks with a hole larger than 23.5 mm in diameter.

Implementation options Cost

On sale you can find another type of chainsaw from this manufacturer. STIHL MS 180-16. It is equipped with a 16-inch tire. For this reason, when assembled, the tool has more impressive dimensions, and it can be used for felling trees whose size reaches 30 cm in diameter.

Before purchasing, you should ask what quality the STIHL-180 chainsaw carburetor has, since the performance of the tool largely depends on this. This is the only way you can be sure of purchasing a high-quality tool that will last for a long time and will also perform all tasks correctly.

In those moments when you don’t have a manual for using a chainsaw at hand, and you can’t establish the markings of its cutting set without the help of others, information tables come to the rescue, designed not only to simplify the life of owners of gas-powered tools, but also to free them from possible mistakes that can allowed to happen by choosing inappropriate tire sizes or the chain blade itself.

You may not have to obtain spare parts for the STIHL-180 chainsaw, since the tool will not be subject to excessive load, since it is intended for household use. Users note that the unit is easy to use. The fuel tank is made of translucent plastic and is also spacious. This greatly simplifies monitoring the fuel level inside. For the safety of the master, an inertial chain brake is provided. How much oil to pour into 25 ml of oil per liter of STIHL 180 chainsaw? If you want to reduce fatigue during work, then you should choose such a tool directly, since it has an anti-vibration system.

Reviews of the “Stil” saw carburetor

Read:

chainsaw has a carburetor, which is adjusted at the production stage. As users note, this eliminates the possibility of unnecessary interference in the work on the part of the owner of the tool. Advantages, disadvantages, price, technical characteristics, analogues, adjustment, instructions and reviews from owners of the stihl ms 660 chainsaw. The Stihl chainsaw organically combines the advantages. The technician may only be faced with the need for recurring maintenance. Experts recommend cleaning the air filter during operation and replacing it from time to time; this also applies to the spark-proof grille. As home craftsmen emphasize, the chain should not spin at idle under any circumstances. This functionality is adjusted using the LD screw.

Read also: How to prepare cuttings for grafting an apple tree

Lightweight chainsaw with a power of 1.5 kW

For collecting firewood, clearing unnecessary thickets, thinning trees in garden plots and construction work, use STIHL MS 180 chainsaws. Their lightweight and reliable design is highly balanced and comfortable for the operator, and their technical properties are highly valued by specialists.

We would like to offer you two options for the STIHL MS 180 petrol chain saws:

– chainsaw STIHL MS 180-16″ 40 cm – chainsaw STIHL MS 180-14″ 35 cm

The last value in the marking means the length of the cut and is the determining parameter in the choice. If you only need a chainsaw for work in the garden, and you are not going to cut thick trees, the STIHL MS 180-14″ 35 cm model is completely sufficient for you. It is suitable for working with lumber and wood species up to 30 cm in diameter and not as powerful as differs from the model with a tire length of 40 cm.

READ Which File For Stihl 180

Contact official representatives in your region.

Displacement cm³ Power hp
chain Weight kg 1) Specific gravity kg/kW Sound pressure level dB(A) 2) Sound power level dB(A) 2) Vibration level left/right m/s² 3) Chain pitch

1) without fuel, without guide bar and saw chain 2) K-factor according to RL 2006/42/EG = 2.5 dB(A) 3) K-factor according to RL 2006/42/EG = 2 m/s²

External signs of dull saw blades

The most popular chainsaws are tools from the Austrian company Stihl, in particular the Shtil-180 (to be precise, Stihl MS-180-14"). Such a chainsaw can cut a branch, and the branches are of medium diameter. handle 1500 watts of power. Despite the trademark quality steel (we don't consider Chinese knockoffs!) used to make teeth, self-sharpening will require skill and time.

Read also: How to check a level in the field

You should pay attention to the following external signs of dullness of the cutting chain:

1. A conical section appeared on the working angle of the tooth.
2. When moving from the working corner to the top surface, the radial rounding is visually different.
3. During the initial feed, even at a relatively low intensity, the insertion of the working edge of the tooth into the thickness of the wood is carried out with great resistance.
4. During the stable cutting stage, the chainsaw begins to vibrate and the noise level of the chainsaw increases noticeably.
5. When sawing longitudinally, the cut surface has rough cuttings and wood chips. The chips themselves are becoming much smaller in size.

The test is carried out on dry wood, and in any case not on wood with high humidity. The frequency of sharpening depends on the direction of the main sawing. If it is performed primarily in the axial direction, then sharpening must be done much more often.

Characteristics MS 180-14

This equipment belongs to the household class; the manufacturer indicates the purpose of the tool, which should be used in gardening. The power of the unit is 1500 watts, the working volume is equivalent to 31.8 cm3. Main page » how many links are there in a chainsaw chain, in the STIHL 180 chainsaw. The chain contains 50 links, and the thickness and pitch of the chain are 1.3 mm and 3/8″, respectively. The product comes with a one-year warranty after purchase and the tool weighs 5.7 kilograms. You can use this equipment for cutting down small trees, bushes, thinning groves, and also for quickly collecting firewood. Home craftsmen successfully use the units for other types of work. A two-stroke gasoline engine is installed inside; the manufacturer equipped the equipment with an IntelliCarb carburetor, which is equipped with a compensator.

Side chain tensioner

Access to the tension screw is provided from the side through the chain sprocket cover. This prevents hand contact with the sharp chain and the tips of the dog.

STIHL ElastoStart

As a result of compression pressure when starting two-stroke engines, jerky forces appear that load muscles and joints. The ElastoStart starting device significantly reduces these harmful effects. The damping element in the handle of the ElastoStart starter alternately absorbs and then gives energy according to the compression process, and thus the start occurs moderately, without shocks.

Review of STIHL chains: marking, purpose

All STIHL chains are marked, thanks to which you can identify them and find out what models of chainsaws and types of work they are intended for.

The title of the chain model must indicate its length (number of links), pitch and width. The type is also indicated. Type is an internal brand designation, thanks to which company specialists can find the type and shape of the cutting tooth, the dimensions of the link and connecting parts. The designation can be complete, or it can be abbreviated by capital letters, for example, chain , abbreviated as PM3.

An ordinary user, in principle, does not need such information, because in order to choose the right headset, it is enough to know the properties of the chainsaw, the planned volume and types of work.

STIHL website has an electrical consultant who automatically generates a list of chains suitable for a specific chainsaw model.

The service is successful and understandable, but it has one big drawback: you can only select chains for STIHL chainsaws. If you have a different chainsaw, you will have to find it by features and name, which is not very convenient, since the list of models is quite large.

Below we suggest watching a small but fascinating and informative video about STIHL , their production process and quality control.

Now let's look at certain models of STIHL , their markings, properties and purpose.

Rapid Duro 3 (RD3), 1.6 mm

This line of STIHL has an increased service life due to the use of special hard alloys in them. Created for use in agriculture, i.e. recommended for semi-professional STIHL models. There are quite a lot of implementation options. Rapid Duro 3 (RD3), 1.6mm can be had in 0.325, 3/8 or 0.404 inch pitches. The most expensive chain in this line costs about 2,500 rubles. and has a length of 66 links.

Rapid Super (RS) range

This line is designed for experts. Naturally, no one forbids the use of such chains on household models of chainsaws, but their price is slightly higher than ordinary chains; for example, Picco Micro 3 will cost even less.

READ Stihl Ms 180 Which Chain Is Needed

According to the manufacturer, Rapid Super can work for a long time without sharpening and their performance is not just the highest, but very high. Such a headset simply copes with very dirty or frozen wood. If you look at the design options, it becomes clear that this chain is definitely not for light and small-sized chainsaws. The largest size available for sale is 105 links, which is actually twice as long as the chain on the STIHL MC 180.

Rapid Micro chain series

The Rapid Micro chain line contains about 10 types, each of which has on average three options with different pitch and width features. The Rapid Micro series chains are united by tooth shape and steel quality. They are recommended for use on STIHL chainsaws used in agriculture (semi-professional). Short designation RM.

How many Links are there on a Shtil 180 Chain?

The Shtil company produces not only chainsaws and brush cutters, but also consumables for their production. Next we will talk about Shtil saw chains, their types, markings, properties, and compare them with their competitors.

IMPORTANT. An experienced electrician leaked to the network the secret of how to pay half for electricity, a legal way. Read more

Content

Review of Stihl chains: marking, purpose

What remains for our client to do are the Stihl chains are marked, thanks to which it is necessary to identify them and find out what models of chainsaws and types of work they are intended for.

The title of the chain model must indicate its length (number of links), pitch and width. The type is also indicated. Type, this is an internal corporate designation, thanks to busy, company specialists determine the type and shape of the cutting tooth, the dimensions of the link and connecting parts. You will like the designation more complete, or can be abbreviated by large letters, nettle chain Picco Micro

3, abbreviated as PM3.

An ordinary user, by and large, does not need such information, because in order to choose the right headset, it is enough to know the properties of the chainsaw, the planned volume and work.

For ease of selection, on the pages of the Shtil company website there is an electrical consultant who automatically generates a list of chains suitable for a particular model of chainsaw.

The service is good and understandable, it has one big drawback, choosing chains

Of course only for Shtil chainsaws. If you have another chainsaw, then you will have to find it by features and name, which is not very convenient, since the list of models is unusually extensive.

Below we suggest watching a small, but fascinating and informative video about Stihl chains, their production process and quality control.

Now let's look at certain models of Shtil chains, their markings, properties and purpose.

Picco Micro (PM)

Stihl chain with a low profile, recommended by the manufacturer for use on lightweight chainsaws and loppers. The peculiarity of the chain is a soft cut, with reduced recoil. It has four versions, which differ in the number of links. This:

1. 3/8″ P Picco Micro (PM), 1.3 mm (50);
2. 3/8″ P Picco Micro (PM), 1.3 mm (51);
3. 3/8″ P Picco Micro (PM), 1.3 mm (55);
4. 3/8″ P Picco Micro (PM), 1.3 mm (56).

This chain is used on Shtil MS 180, 250 and etc. chainsaws. Etc. Recommended retail price from 490 to 550 rubles. The specific cost depends on the number of links. Also, the Stihl saw chain can be sold in coils of 50 and 100 meters, riveted, of course, using a Stihl riveting machine, as it is also called. Information on how to rivet correctly can be found on our website.

READ Sharpening a Chainsaw Chain With a File Yourself

3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm

A distinctive feature is a very narrow cut. Abbreviated designation PMM3. It is recommended for entry-level chainsaws, as well as hedge trimmers and hedge trimmers. Has three options:

How many links are there on the chain Stihl 180.

1. 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm (39);
2. 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm (44);
3. 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm (50).

Used on Shtil MS 170, 180, 211, 230 chainsaws. Belongs to the comfort class, because it has the least vibration and recoil.

Fundamentally: a chain with a width of 1.1 mm must be used with a corresponding bar, otherwise it will dangle in the mounting socket, which will lead to rapid wear of both the headset itself and the guide bar.

1/4″ P Picco Micro 3 (PM3), 1.1 mm

Recommended especially for pole saws and small-sized chainsaws, nettle, MS 150 TC-E or MS 193 T. It is considered exclusive because it has a non-standard 1/4″ pitch, a narrow and flat design. It has three versions, the length of which is 56, 64 or 72 links.

3/8″ P Picco Micro 3 (PM3), 1.3 mm

This model belongs to the comfort class, and is designed for professional use on light and small-sized chainsaws. The chain offers superior performance, comparable to standard performance, with immediately reduced recoil, which is achieved due to its low profile. Of course there are several options:

1. 3/8″ P Picco Micro 3 (PM3), 1.3 mm, 50 links
   ;
2. 3/8″ P Picco Micro 3 (PM3), 1.3 mm (51);
3. 3/8″ P Picco Micro 3 (PM3), 1.3 mm (55);
4. 3/8″ P Picco Micro 3 (PM3), 1.3 mm (56).

3/8″ P Picco Super (PS), 1.3 mm

Picco Super, according to the manufacturer, is the first chain in the world community that has a chisel-shaped tooth. Developed by Shtil specifically for forestry experts. Easy cutting, comfortable vibration level and smooth running. It has a clean cutting surface, which is important for those people who carve wood using a chainsaw. Execution options:

1. 3/8" P Picco Super, 1.3mm (44);
2. 3/8" P Picco Super, 1.3mm (50);
3. 3/8" P Picco Super, 1.3mm (55).

Chainsaw chain STIHL MS 180

How to correctly count chain links

chainsaws so as not to make a mistake in the selection.

Used with both professional, semi-professional and household models of chainsaws.

1/4″ Rapid Micro Spezial (RMS), 1.3 mm

Designed specifically for shaped wood cutting. A distinctive feature is the shortened upper edge of the tooth, thanks to which you will not put pressure on the saw, so that the chain can cut into the wood. It is characterized by the highest speed and smoothness when performing curved cuts in comparison with ordinary chains that have a similar 1/4″ pitch. Available in 2 versions:

1. 1/4 Rapid Micro Spezial, 1.3 mm(56);
2. 1/4 Rapid Micro Special, 1.3 mm(64).

READ How The Chainsaw Should Be Tensioned

Rapid Micro chain series

The line of Rapid Micro chains means about 10 types, each of which has an average of three designs with different pitch and width features. The Rapid Micro series chains are united by tooth shape and steel quality. They are recommended for use on Shtil chainsaws working in agricultural production (semi-professional). Short designation RM.

Rapid Super (RS) range

This line is designed for experts. This, no one forbids the use of such chains on household models of chainsaws, alas, their price is slightly higher than ordinary chains, for example, Picco Micro 3 will cost even less.

According to the manufacturer, Rapid Super is capable of working for a long time without sharpening and their performance is not very high, but very high. Such a headset simply copes with very dirty or frozen wood. If you look at the design options, it becomes clear that this chain is definitely not for light and small-sized chainsaws. The largest size available for sale is 105 links, which is actually twice as long as the chain on Shtil MS 180.

Rapid Duro 3 (RD3), 1.6 mm

This line of Shtil chains has an increased service life due to the use of special hard alloys. Created for use in rural production, i.e. recommended for semi-professional Shtil models. There are many options for implementation. Rapid Duro 3 (RD3), 1.6 mm has a pitch of 0.325, 3/8 or 0.404 inches. The most expensive chain in this line costs about 2,500 rubles. And has a length of 66 links.

3/8″ Rapid Duro Rescue (RDR), 1.6 mm

This is a special Stihl chain for emergency work, we have nicknamed it “Supertooth”. Due to pobedite soldering on the cutting edge of the tooth, it can cut wood with nails, glass, brick and other building materials. Where conditions are extremely difficult and a conventional chain would be helpless, Rapid Duro Rescue (RDR) will do everything as quickly as possible.

It has a length of 72 teeth, is not available in other versions, and is recommended for use on saws for rescue work, for example, Shtil MS 461 R with a power of 4.4 kW. The cost of Rapid Duro recommended by the manufacturer is from 9060 rubles.

Our client remains with the prices that we announced in the text of the article, taken from the official website of the company.

We invite you to watch a video showing a comparative test of Stihl saw chains. The video is in British, but unfortunately it shows that a concrete insert is poured into the tree trunk where the cutting speed test is being carried out. An ordinary headset cannot handle even 3 cuts, although a special one makes more than 10 cuts and remains operational.

Which chain to use for rip sawing

Chainsaw users often receive a question: which chain is suitable for longitudinal sawing and are there chains specifically designed for such purposes.

Now there are no chains designed specifically for sawing a tree trunk lengthwise, and most likely they will not appear, since any saw chain is used for such purposes. The difference between an ordinary headset and a longitudinal one is the sharpening angle.

When using a straightening machine, you can make a special one from an ordinary set - one that facilitates longitudinal cutting. You will find information on exactly how this is done on our website.

READ Which Chain Pitch Is Best For A Chainsaw

Which chain is better Stihl or Oregon

It is not possible to choose which chain is better, Calm or Oregon, because they are actually similar in quality. The Oregon company, like Shtil, practices in their production and invests in development, constantly improving and releasing new models.

If we compare users approximately, then Oregon is not much softer, they dull faster, but they are easier to sharpen when using ratfil. The Shtilevsky ones are all hardened, the metal is hard to sharpen, unfortunately it holds an edge a little longer.

Curious. According to the recommendations of professionals, the issue of headset properties is relative. Some users initially use used motor oil for lubrication, and then say that this or that model and brand of chain is bad, although the reason for early wear lies in the iron shavings that are contained in any used oil, even that which has had time to settle before filling.

Reasons for rupture of the saw set

From time to time, while working with a chainsaw, the headset may break. This phenomenon is not uncommon, but does occur from time to time. There may be several circumstances, the first and most common is severe wear and tear. During operation, the edges rub against the bar, as a result, the metal is evenly worn away and the chain, unable to withstand the load, breaks.

Important! The introduction of high-quality adhesive oils can significantly extend the life of the saw set.

The second reason is untimely replacement of the drive sprocket and saw bar; otherwise, replacing them separately. According to the advice given by domestic manufacturers, the saw set, guide bar and drive sprocket are made as a set. This will prevent wear, stretching and tearing due to excessive loads.

3rd, this is a defect when sharpening with a special sharpening machine. The machine disk rotates at high speeds, which makes it incorrect to adjust the groove depth, or in other words, for some reason, the working stroke of the machine will increase, then a fraction of a second is enough to be able to cut the edges of the connecting link. If after sharpening you do not check its quality and the presence of cut links

, then when working under load, the cut link may break.

4th and last is the lack of rivets. A frequent prerequisite for breaking a chain is its incorrect connection, or, in other words, the re-introduction of connecting links. If your cutting set is torn, then information about how to actually connect the circuit will be very useful.

Stihl sharpening machine

Towards the end of the note there is little information about the Stihl . Currently, the USG machine is presented on the company’s own website. Sharpening on the machine works automatically, and feeding is done manually. The machine is capable of sharpening not only the cutting edge of the working tooth, but also the depth limiter, which is impossible to do on similar competing machines. For more information about the Shtil sharpening machine and its operation, watch the video.

Conclusion

Source

Overview of STIHL chains

STIHL company produces not only chainsaws and brush cutters, but also consumables for them. In this article we will talk about STIHL saw chains, their types, markings, properties, and compare them with their competitors.

• STIHL chains : marking, purpose
• Picco Micro (PM)
• 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm
• 1/4″ P Picco Micro 3 (PM3), 1.1 mm
• 3/8″ P Picco Micro 3 (PM3), 1.3 mm
• 3/8″ P Picco Super (PS), 1.3 mm
• 1/4″ Rapid Micro Spezial (RMS), 1.3 mm
• Rapid Micro chain series
• Rapid Super (RS) range
• Rapid Duro 3 (RD3), 1.6 mm
• 3/8″ Rapid Duro Rescue (RDR), 1.6 mm
• Which chain for rip sawing
• Which chain is better STIHL or Oregon
• Reasons for rupture of the saw set
• STIHL sharpening machine
• Conclusion

Chain Stil for Rip Sawing

The Shtil company produces not only chainsaws and brush cutters, but also consumables for them. Here we will talk about Shtil saw chains, their types, markings, properties, and compare them with their competitors.

What remains for our client to do are Stihl chains are marked, thanks to which it is necessary to identify them and find out what models of chainsaws and types of work they are intended for.

The title of the chain model must indicate its length (number of links), pitch and width. The type is also indicated. Type, this is an internal corporate designation, thanks to busy, company specialists determine the type and shape of the cutting tooth, the dimensions of the link and connecting parts. You will like the designation in full, or it can be abbreviated by large letters, for example, the Picco Micro 3 chain, abbreviated as PM3.

An ordinary user, by and large, does not need such information, because in order to choose the right headset, it is enough to know the properties of the chainsaw, the planned volume and work.

For ease of selection, on the pages of the Shtil company website there is an electrical consultant who automatically generates a list of chains suitable for a particular model of chainsaw.

The service is successful and understandable, of course it has one big drawback: selecting chains is only an option for Shtil chainsaws. If you have a different chainsaw, then you will have to find it by features and name, which is not entirely convenient, since the list of models is unusually extensive.

Below we suggest watching a small but fascinating and informative video about Stihl chains, their production process and quality control.

Now let's look at certain models of Shtil chains, their markings, properties and purpose.

Stihl chain with a low profile, recommended by the manufacturer for use on lightweight chainsaws and loppers. The peculiarity of the chain is a soft cut, with reduced recoil. It has four versions, which differ in the number of links. This:

1. 3/8″ P Picco Micro (PM), 1.3 mm (50);
2. 3/8″ P Picco Micro (PM), 1.3 mm (51);
3. 3/8″ P Picco Micro (PM), 1.3 mm (55);
4. 3/8″ P Picco Micro (PM), 1.3 mm (56).

This chain is used on Shtil MS 180, 250 and etc. chainsaws. etc. Recommended retail price from 490 to 550 rubles. The specific cost depends on the number of links. Also, Stihl saw chain can be sold in coils of 50 and 100 meters, riveted, of course, using a Shtil riveting machine or similar. You will always find information on how to rivet correctly on our portal.

A distinctive feature is a very narrow cut. Abbreviated designation PMM3. It is recommended for entry-level chainsaws, and additionally pole-cutters and hedge trimmers. Has three options:

1. 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm (39);
2. 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm (44);
3. 3/8″ P Picco Micro Mini 3 (PMM3), 1.1 mm (50).

Used on Shtil MS 170, 180, 211, 230 chainsaws. Belongs to the comfort class, because it has the least vibration and recoil.

READ How to Adjust the Carburetor on a Husqvarna Trimmer Video

Fundamentally: a chain with a width of 1.1 mm must be used with a corresponding bar, otherwise it will dangle in the mounting socket, which will lead to rapid wear of both the headset itself and the guide bar.

Recommended especially for pole saws and small-sized chainsaws, for example, MS 150 TC-E, or MS 193 T. It is considered exclusive because it has a non-standard 1/4″ pitch, a narrow and flat design. It has three versions, the length of which is 56, 64 or 72 links.

This model belongs to the comfort class, and is designed for professional use on light and small-sized chainsaws. The chain offers superior performance, comparable to standard performance, with immediately reduced recoil, which is achieved due to its low profile. There are several options for implementation:

1. 3/8″ P Picco Micro 3 (PM3), 1.3 mm, 50 links;
2. 3/8″ P Picco Micro 3 (PM3), 1.3 mm (51);
3. 3/8″ P Picco Micro 3 (PM3), 1.3 mm (55);
4. 3/8″ P Picco Micro 3 (PM3), 1.3 mm (56).

Picco Super, according to the manufacturer, is the first chain in the world community that has a chisel-shaped tooth. Developed by Shtil specifically for forestry experts. Easy cutting, comfortable vibration level and smooth running. It has a clean cutting surface, which is important for those who carve wood using a chainsaw. Execution options:

1. 3/8" P Picco Super, 1.3mm (44);
2. 3/8" P Picco Super, 1.3mm (50);
3. 3/8" P Picco Super, 1.3mm (55).

Used with both professional, semi-professional and household models of chainsaws.

Designed specifically for shaped wood cutting. A distinctive feature is the shortened upper edge of the tooth, due to which there is no need to put pressure on the saw so that the chain cuts into the wood. It is characterized by the highest speed and smoothness when performing curved cuts compared to ordinary chains that have a similar 1/4″ pitch. Available in 2 versions:

1. 1/4 Rapid Micro Spezial, 1.3 mm(56);
2. 1/4 Rapid Micro Special, 1.3 mm(64).

The Rapid Micro chain line contains about 10 types, each of which has approximately three design options with different pitch and width features. The Rapid Micro series chains are united by tooth shape and steel quality. They are recommended for use on Shtil chainsaws working in agricultural production (semi-professional). Short designation RM.

This line is designed for experts. Naturally, no one forbids the use of such chains on household models of chainsaws; alas, their price is slightly higher than ordinary chains; for example, Picco Micro 3 will cost even less.

According to the manufacturer, Rapid Super is capable of working for a long period of time without sharpening and their performance is not very high, but very high. Such a headset simply copes with very dirty or frozen wood. If you look at the design options, it becomes clear that this chain is definitely not for light and small-sized chainsaws. The largest size available for sale is 105 links, which is actually twice as long as the chain on Shtil MS 180.

READ Carburetor Adjustment Shtil 180 Do It Yourself

This line of Stihl chains has an increased service life due to the use of special hard alloys. Created for use in rural production, i.e. recommended for semi-professional Shtil models. There are many options for implementation. Rapid Duro 3 (RD3), 1.6mm contains 0.325, 3/8 or 0.404 inch pitch. The most expensive chain in this line costs about 2,500 rubles. and has a length of 66 links.

This is a special Stihl chain for emergency work, in our state it received the nickname “Supertooth”. By using pobedite soldering on the cutting edge of the tooth, it can saw wood with nails, glass, brick and other building materials. Where the conditions are very difficult and the ordinary chain is weak, Rapid Duro Rescue (RDR) will do what remains to be done by our client very quickly.

It has a length of 72 teeth, is not available in other versions, and is recommended for use on saws for rescue work, for example, Shtil MS 461 R with a power of 4.4 kW. The cost of Rapid Duro recommended by the manufacturer is from 9060 rubles.

What remains for our client to do? The prices that we announced in the text of the article were taken from the official website of the company.

We invite you to watch a video showing a comparative test of Stihl saw chains. The video is in British, but it shows that a concrete insert is poured into the tree trunk where the cutting speed test is being carried out. An ordinary headset cannot handle even 3 cuts, although a special one makes more than 10 cuts and remains operational.

Chainsaw users often receive a question: which chain is suitable for longitudinal sawing and are there chains specifically designed for such purposes.

Now there are no chains designed specifically for sawing a tree trunk lengthwise, and most likely there will not be any, since any saw chain is used for such purposes. The difference between an ordinary headset and a longitudinal one is the sharpening angle.

Using a straightening machine, there is an option to make a special one from an ordinary set - one that facilitates longitudinal cutting. You will find information on exactly how this is done here.

Choosing which chain is better, Stihl or Oregon, is not easy, because they are actually similar in quality. The Oregon company, like Shtil, practices in their production and invests in development, constantly improving and releasing new models.

If we compare users on the verge, then Oregon is a little softer, they dull faster, but they are easier to sharpen with the help of a ratfil. Shtilevsky ones are all hardened, the metal is difficult to sharpen, alas, it doesn’t hold an edge much longer.

READ How to Sharpen a Chainsaw Chain at Home

Curious. According to the recommendations of professionals, the issue of headset properties is relative. Probably users at first use used motor oil for lubrication, and then they say that this or that model and brand of chain is bad, although the reason for early wear lies in the iron shavings that are contained in any used oil, even that which has had time to settle before filling.

When working with a chainsaw, the headset may break. This phenomenon is not uncommon, but it happens all the time. There may be several circumstances, the first and most common is severe wear and tear. During operation, the edges rub against the bar; upon completion, the metal is evenly worn away and the chain, unable to withstand the load, breaks.

Fundamentally! The introduction of high-quality adhesive oils can significantly extend the life of the saw set.

Another reason is untimely change of the drive sprocket and saw bar, or changing them separately. According to the advice given by the Russian automotive industry, the saw set, guide bar and drive sprocket are made as a set. This will prevent wear, stretching and tearing and therefore excessive loads.

3rd, this is a defect when sharpening with a special sharpening machine. The machine disk rotates at high speeds, provided that the groove depth is adjusted incorrectly, as it is also called, for some reason the working stroke of the machine will increase, then a fraction of a second will be enough if you set the goal of cutting the edges of the connecting links. If after sharpening you do not check its quality and the presence of cut links, then when working under load, the cut link may break.

4th and last is the lack of rivets. A frequent prerequisite for breaking a chain is its incorrect connection or re-introduction of connecting links. If your cutting set is torn, then information on how to connect the chain will be very useful.

Towards the end of the note, a little about the Shtil sharpening machine. Currently, the USG machine is presented on the company’s own website. Sharpening on the machine works automatically, and feeding is done manually. The machine is capable of sharpening not only the cutting edge of the working tooth, but also the depth limiter, which is impossible to do on similar machines of rivals. For more information about the Shtil sharpening machine and its operation, watch the video.

The Shtil company produces high-quality chains for its own chainsaws and pole saws, which are popular among both experts and ordinary users. If we associate Stihl chains with their rivals, then they are not much stronger, but they are more difficult to sharpen by hand, which is not entirely excellent for ordinary users, since they have to go to a service center for sharpening.

Source

STIHL sharpening machine

a little about the STIHL sharpening machine. Today, the USG machine is presented on the company's official website. Sharpening on the machine works automatically, and feeding is done manually. The machine is capable of sharpening not only the cutting edge of the working tooth, but also the depth limiter, which is impossible to do on similar competing machines. For more information about the STIHL sharpening machine and its operation, watch the video.

1/4″ P Picco Micro 3 (PM3), 1.1 mm

Recommended especially for pole saws and compact chainsaws, for example, MS 150 TC-E or MS 193 T. It is considered exclusive because it has a non-standard 1/4″ pitch, narrow and flat design. It has three versions, the length of which is 56, 64 or 72 links.

Laser sight 2 in 1

Two in one: fall direction indicator and cross-cutting device. For cutting short pieces of wood to size without time-consuming measurements, with a fall direction indicator function to control the quality of cuts and the direction of fall, DVD demonstration. You can also choose a suitable holder for your chainsaw.

Sharpening saw chains:

Before sharpening the chain, it must be cleaned of dirt. Then you need to select one link as the starting link. Place the chainsaw on a stable surface. Sharpening can be done in several ways:

Manual chain sharpening machine

Read how to use files and devices for manual chain sharpening here: File for sharpening chainsaw chains. Sharpening devices. Watch a video on sharpening chains

Watch a video on sharpening chains with an electric machine

Ematic chain lubrication system

STIHL system consists of an Ematic guide bar, an Oilomatic saw chain and a variable-flow oil pump. The special design of the bar and chain ensures that every drop of oil reaches exactly where it is needed for lubrication. This allows you to reduce oil consumption by 50%.

Execution options

Manufacturer's recommended price as of 09/01/2019. Manufacturer's recommended price is not taken into account within promotions.

general information

For collecting firewood, clearing unwanted overgrowth, thinning trees in garden plots and construction work, use STIHL MS 180 chainsaws. Their lightweight and reliable design is highly balanced and operator-friendly, and their technical characteristics are highly valued by specialists.

We offer you two versions of STIHL MS 180 petrol chain saws:

READ How to properly trim drywall at joints

– chainsaw STIHL MS 180-16″ 40 cm – chainsaw STIHL MS 180-14″ 35 cm

The last value in the marking means the length of the cut and is the determining parameter in the choice. If you only need a chainsaw for work in the garden, and you are not going to cut thick trees, the STIHL MS 180-14″ 35 cm model will be enough for you. It is suitable for working with lumber and wood with a diameter of up to 30 cm and is no different in power from the model with a tire length of 40 cm.

Contact authorized dealers in your region.

How many teeth are on the Chainsaw Shtil 180

File for sharpening chainsaw chains. We choose the necessary

When actively working on pruning or expanding the area of ​​a personal plot, the home workshop should have a chainsaw. Chainsaw teeth, even from a trusted brand (such as Stihl), wear out periodically, and therefore they need high-quality sharpness. In the absence of special devices, a correctly selected chainsaw file will help with this problem.

Content

External signs of dull saw blades

The most popular chainsaws are tools from the Austrian company Stihl, in particular the Shtil-180 (to be precise, Stihl MS-180-14"). Such a chainsaw can cut a branch, and the branches are of medium diameter. handle 1500 watts of power. Despite the trademark quality steel (we don't consider Chinese knockoffs!) used to make teeth, self-sharpening will require skill and time.

You should pay attention to the following external signs of dullness of the cutting chain:

1. A conical section appeared on the working angle of the tooth.
2. When moving from the working corner to the top surface, the radial rounding is visually different.
3. During the initial feed, even at a relatively low intensity, the insertion of the working edge of the tooth into the thickness of the wood is carried out with great resistance.
4. During the stable cutting stage, the chainsaw begins to vibrate and the noise level of the chainsaw increases noticeably.
5. When sawing longitudinally, the cut surface has rough cuttings and wood chips. The chips themselves are becoming much smaller in size.

The test is carried out on dry wood, and in any case not on wood with high humidity. The frequency of sharpening depends on the direction of the main sawing. If it is performed primarily in the axial direction, then sharpening must be done much more often.

READ How to Make a Snow Blower Using a Chainsaw

What's included in the sharpening kit?

In the absence of a dedicated machine, you will need to use a file to sharpen your chain chains (or rather, not one, but two). You also need a special template with which you can check the current value of the sharpening angle. Thus, the main set of grinding tools includes:

1. Round file with a diameter of 4.5. 5 mm.
2. A holder with special positioning lines with which the tool can be positioned with the required precision on the upper edge. The holder is equipped with a part that rests on the surface of the cut-off depth limiter.
3. A flat file that sharpens the stopper itself.
4. The hook that removes sawdust is formed during the sharpening process.

It should be noted that hand sharpening is only effective when the marks of a dull chainsaw are set very quickly and wear out. relatively small. Otherwise, more complex and expensive specialized machines will be required. FUG series manual machines are also suitable for working with Shtil-180 teeth. Their advantage is that it is possible to qualitatively sharpen teeth whose wear was sharply uneven.

Chains for chainsaws, their types and sizes

Chains

for
chainsaws
, their types and sizes.
In this video we will talk and look at chains
, find out their types, sizes, etc.

Chainsaw chain STIHL MS 180

How to correctly count chainsaw chain

so as not to make a mistake in the selection.

Experts advise buying sets of such files at the same time as purchasing the saw itself or, as a last resort, in the same store. There is no universal file for sharpening chainsaws from different manufacturers.

How to choose the right file sizes for chain sharpening?

The main difficulty is determining the size of a round file because the job done with a flat tool is much easier. For Stihl saw teeth, the top end of the file should protrude onto the surface of the working angle by 20% of its height. However, remember the saw chain pitch is usually taken at 0.325 inches.

READ Disassembling Chainsaw Partner 340

The next step in choosing is to determine the length of the round file. It depends on its size. GOST 1465 establishes five numbers for this tool, but only number 4 or 5 is suitable as a file for sharpening a chainsaw. Files No. 4 have a working length of 200 mm, and No. 5 - 250 mm and 300 mm. As the length increases, the amplitude of movements of the working hands increases, therefore, the quality of the file guidance along the tooth increases accordingly. Therefore, a longer sharpening file is better.

In addition to length, it is important to correctly determine the type of cuts available. They may have cut or cut teeth. For sharpening it is better than an isolated one, since otherwise the cutting angle changes over a wider range of values ​​(70 ± 10 0), which is unacceptable for processing chainsaw teeth.

As the material for the file, it is necessary to take tool steel U13 or U13A in accordance with GOST 1435. Other options for grinding work with saw teeth are not suitable.

The domestic tool industry produces a special sized line of “Zubr” metal files, which are designed specifically for manual sharpening of chainsaw teeth. The price of the required tool numbers ranges from 300 to 350 rubles.

Sequence of operations when sharpening

High-quality teeth sharpening implies strict adherence to the following rules:

1. The chainsaw sharpening file must be positioned strictly perpendicular to the direction of movement of the saw teeth in the vertical direction and at an angle of 15.20 0. in the horizontal direction. The latter is controlled using a holder.
2. The round file in the throat of the tooth must be located slightly above its edge (for file No. 5 this is approximately 1.1.5 mm).
3. A holder is installed on the tooth, the lines of which show the exact direction of the file moving in the horizontal plane.
4. After several file movements, the sanding surface is covered with magnetized chips, which must be removed immediately by crocheting.
5. Sharpening begins in a direction away from you, without applying excessive force: the cutouts should carefully enter the metal of the tooth. It is recommended to make several movements, then rotate the file 20.30 0 so that the cuts wear more evenly.
6. It is recommended to sharpen “through the tooth”: first sharpen the teeth in one direction, and then. in a different.
7. The pressure on the file during grinding must be constant, as well as the number of reciprocating movements along the pointed tooth.

READ Chainsaw Husqvarna 236 Starts and Stalls

When sharpening the depth indicator, proceed as follows. The template is superimposed on the limiter. When the stopper slot fits into the template groove, set the height of the worn area that is removed using a flat file. The template is installed on both sides. hard or soft, which corresponds to hard or soft wood.

Sharpening will be easier if the chainsaw bar is clamped with metal powder. The interval between sharpening can be increased if the chain voltage is checked in a timely manner, the condition of the limiter is monitored, all moving parts are regularly lubricated, and the drive sprocket is periodically replaced.

Chains for chainsaw STIHL MS 180

One of the most frequently asked questions about the chain for the 180 Stihl is: “Chain for the STIHL 180 chainsaw—how many links?” We asked and we answer))

• Tire 14″ (35 cm) long - 50 links.
• Tire 16″ (40 cm) long - 55 links.

Technical data

1) without fuel, without guide bar and saw chain 2) K-factor according to RL 2006/42/EG = 2.5 dB(A) 3) K-factor according to RL 2006/42/EG = 2 m/s²

The product range and information may vary depending on the export version. Structural and technological modifications of tools and equipment, as well as price changes, are possible.

Sequence of operations when sharpening

High-quality teeth sharpening implies strict adherence to the following rules:

1. The chainsaw sharpening file must be positioned strictly perpendicular to the direction of movement of the saw teeth in the vertical direction and at an angle of 15.20 0. in the horizontal direction. The latter is controlled using a holder.
2. The round file in the throat of the tooth must be located slightly above its edge (for file No. 5 this is approximately 1.1.5 mm).
3. A holder is installed on the tooth, the lines of which show the exact direction of the file moving in the horizontal plane.
4. After several file movements, the sanding surface is covered with magnetized chips, which must be removed immediately by crocheting.
5. Sharpening begins in a direction away from you, without applying excessive force: the cutouts should carefully enter the metal of the tooth. It is recommended to make several movements, then rotate the file 20.30 0 so that the cuts wear more evenly.
6. It is recommended to sharpen “through the tooth”: first sharpen the teeth in one direction, and then. in a different.
7. The pressure on the file during grinding must be constant, as well as the number of reciprocating movements along the pointed tooth.

Read also: How to install lighting in the house

When sharpening the depth indicator, proceed as follows. The template is superimposed on the limiter. When the stopper slot fits into the template groove, set the height of the worn area that is removed using a flat file. The template is installed on both sides. hard or soft, which corresponds to hard or soft wood.

Sharpening will be easier if the chainsaw bar is clamped with metal powder. The interval between sharpening can be increased if the chain voltage is checked in a timely manner, the condition of the limiter is monitored, all moving parts are regularly lubricated, and the drive sprocket is periodically replaced.

Choosing the right saw chain is essential for efficient work. STIHL offers the optimal saw chain for every application, for every power class and for every saw manufacturer. All chains are of high quality. STIHL saw chains are manufactured in Switzerland at the STIHL plant in Wil. Chains are produced on special equipment, which is developed and manufactured by STIHL itself.

By contacting an official STIHL dealer in your region, you will receive professional assistance in choosing equipment.

* Manufacturer's recommended price as of 07/01/2019. Manufacturer's recommended price is not taken into account within promotions.

The product range and information may vary depending on the export version. Structural and technological modifications of tools and equipment, as well as price changes, are possible.

Which chain fits the STIHL 180?

Transverse or longitudinal saw chains can be installed on the saw with a pitch of 3/8 inches, 1.3 mm thick with the number of links depending on the length of the bar (the length of the bar is indicated in brackets): 44 links (12″ - 30 cm); 50 stars (14″ – 35 cm); 55 stars (16″ – 40 cm).

In those moments when you don’t have the operating instructions for a chainsaw at hand, and you can’t independently determine the markings of its cutting set, information tables come to the rescue, designed not only to simplify the life of owners of gas-powered tools, but also to save them from possible mistakes that can be made by choosing unsuitable dimensions of the tire or the chain blade itself.

Why is the tabular version of presenting information the best?

The chainsaw chain selection table is the most convenient way to visualize summary data. With this indicator, there will no longer be a need to puzzle over whether the dimensions of the new components correspond to the elements that were installed on the factory model. The key characteristics were used:

• tire size (in cm);
• chain pitch;
• thickness of tails (mm);
• total number of chain links.

The first parameter is determined by many factors and is usually within the range of 30-45 cm, although there are exceptions.

Chain pitch is the distance measured between 3 nearby rivets.

The thickness of the drive links or the height of the tire groove can be measured with a regular caliper. Usually it is in the range of 1.1-2.0 mm.

The total number of cutting links is also taken into account when selecting a chain.

How to use the table?

The left column indicates the most common models of chainsaws, and the following ones indicate the leading criteria. Having found the desired modification of the tool, you can find out the necessary data regarding its saw part within a few seconds and quickly resolve any controversial situation.

Sources:

https://benzopilok.ru/shiny/tsepi-shtil.html https://landshafto.ru/info/cep-dlja-benzopily-shtil-180/ https://schemy.ru/info/shag-cepi-benzopily -stil-180/