Chainsaw Stihl MS 180 - the standard of quality and reliability of the last decade

Not every branded manufacturer of chainsaw equipment has in its assortment cult-level models that have become benchmarks for quality and durability. Without exaggeration, the legendary Stihl MS 180 chainsaw occupies a worthy place in the category of general-purpose household saws.

The model, successful in all respects, with minor improvements, was produced for more than 15 years. During this time, a tool that is unique in many ways and has the status of a bestseller in the chainsaw market, occupying the top lines of official and unofficial consumer ratings.

Photo: Stihl MS 180 chainsaw

The constantly high demand for this branded development is based on the effectiveness of its use in private economic work. In a wide range of special works related to sawing fuel and preparing construction wood materials for installation.

Features of design and application

In working on the project, the designers used diverse experience in operating previous models and advanced engineering and design solutions even for our time. The performance characteristics of the chainsaw are aimed at use in the private sector and small-scale construction.

• The Shtil MS 180 saw successfully copes with sawing fuel wood, trimming large branches and forming the crowns of fruit and ornamental trees.
• Compact dimensions determine its suitability for working in hard-to-reach places of erected log and timber structures.
• Owners of this tool respect it for its stable performance in various types of simple and complex sawing work, a high degree of operational reliability and a long service life.
• Functional malfunctions of a chainsaw in most cases are the result of unskilled care, excessive loads, unjustified savings on the quality and cost of fuel, lubricants and consumables.

According to information received from service departments, new Shtil chainsaws are received for warranty repair in single copies. The main part of the repair range is models produced after the 2000s, the performance and technical characteristics of which are restored by 96-98% with moderate costs of material resources.

Chainsaw Shtil 180 How many links in the chain

Content

Chainsaws "Shtil-180": reviews. Chainsaw Stihl MS 180 14: cost, reviews, description, properties

Chainsaws "Shtil-180", reviews of which are useful for you to find out before purchasing the product, are powered devices that are designed for cutting down trees in everyday use. The tool is powered by an internal combustion engine; fuel is used with an octane rating of at least 90. Often the oil system in the Stihl 180 chainsaw is damaged. Chainsaw stihl ms 250 in the database the number of links with such ms 250 stihl chains (calm). Such a malfunction can be determined by the dryness of the operating chain or the presence of leakage. To operate the tool, you will need oil, which is added to the fuel mixture in a ratio of 1 to 50.

Design features

Chainsaws "Shtil-180", reviews of which should definitely be reviewed

Maintainability and information support

• Chainsaw Shtil model 180 differs from prototypes in its high maintainability. Using commercially available spare parts, the owner can perform fairly complex repairs with his own hands.
• The operating instructions included in the standard package offer easy-to-understand information on preparing the tool for operation, maintenance, and methods for independently searching and eliminating detected faults.

Numerous consumer reviews confirm the compliance of the performance characteristics declared by the manufacturers with the actual capabilities of the tool.

Device and circuit

The design of the Stihl 180 chainsaw (like the stihl ms 660 chainsaw) is quite complicated, and this is due to the peculiarities of the operation of this unit. In order to become familiar with the specifics of its operation, you need to study the operating instructions for the stihl ms 180 chainsaw.

Here there is a selection of the schematic structure of a chainsaw, all the nuances regarding the component parts and the implementation of the first and subsequent launch are indicated. To keep the device in good condition and to be confident in its performance, you need to know the basics of its structure and the principle of operation. Also, for more efficient operation, it is necessary to adjust the chainsaw carburetor.

Serial equipment of the product consists of:

• Ematic type guide rail;
• Oilomatic saw chain;
• An adjustable oil pump that ensures even distribution of oil throughout the entire chain and guarantees excellent system operation;
• Carburetor with a special STIHL compensator that regulates optimal engine power;
• Air filter;
• Start lever (cold and hot);
• Control lever;
• Handle with a particularly anti-vibration system.

Specifications

The Shtil MS 180 model has optimal overall dimensions and weight parameters. A compact and easy-to-use chainsaw weighing 3.8 kg stands out from the general range with its excellent body design, reliable grip, comfortable level of vibration and operating noise.

The tool is equipped with a standard, economical and easy-to-maintain 2-stroke carburetor internal combustion engine. With a working volume of 31.8 cm3, the unit operating in operating mode develops power up to 2 hp. The engine runs on a standard fuel mixture, in the proportion of oil and gasoline 50:1.

The manufacturer guarantees the stability of operating parameters provided that high-quality high-octane gasoline and branded semi-synthetic motor oil are used. If the required consumables are not available, it is allowed to use analogues of other brands with identical characteristics.

The advantages of a carburetor drive:

• economical fuel consumption in operating modes;
• reliable start independent of temperature factors;
• stability of idle and operating speeds under load;
• high torque coefficient;
• easy maintenance access to carburetor adjustment points and air intake filter.

A significant extension of the overhaul and operational life of the Shtil MS 180 chainsaw is facilitated by the use of high-quality materials, innovative metalworking and assembly technologies.

Description of the Stihl 180 ms chainsaw - engine, purpose

Chainsaw Shtil 180 ms is a German-made chainsaw. The tool runs on a two-stroke gasoline engine. The purpose of the Shtil 180 chain saw is for household use. The saw can be used for simple loads, for example, in the construction of structures, when cutting logs, the characteristics of the Stihl ms 180 tool allow you to work with the saw from the mains; if there is a source of stable voltage, the saw can be operated without turning off for up to 2.5 hours.

Lightweight chainsaw STIHL MS 180

The manufacturer of the Stihl chainsaw is the German company Stihl (Germany). Based on reviews of chainsaws, Stihl chainsaws made in Germany are original products that rarely break down or require minor repairs. The tool warranty can be either standard or extended. Warranty service is provided by a service center in the region.

The basic model 180 ms is also available in an improved version - the Stihl 180 ms c-be chain saw. A saw with a similar marking has a simplified starting system. The MS C-be mark means that the saw is equipped with electronics for more efficient operation.

Chainsaws Shtil 180 ms are used for the following types of work:

• sawing firewood, building wooden structures;
• preparing logs for cutting, removing bark;
• furniture manufacture;
• pruning dry branches on a summer cottage, pruning bushes and dried trees;
• work with chipboard, OSB boards, composite material;
• Stihl ms 180 is intended only for wood and wood-containing materials.

The chainsaw of this brand has proven itself to be an excellent product among its owners, this is clear from the positive reviews and the mass of videos describing or using the Shtil 180 ms chain saw. Next is a video about the saw of this model. It explains the technical advantages of the Stihl ms 180 chainsaw:

Video

Video review of the Shtil chainsaw 180 ms

Video

Carburetor adjustment

Correct adjustment of the fuel equipment allows you to combine economical fuel consumption and maximum traction characteristics in the operation of the power unit.

Factory adjustment of the chainsaw carburetor is carried out according to average parameters, therefore, taking into account external factors, it requires additional adjustment.

The standard setup sequence is given in the instructions. In order to adjust the carburetor for maximum performance and efficiency, you must first clean the air intake filter and warm up the engine to operating temperature.

The main causes of decreased thrust, excessive smoke, and increased consumption of the fuel mixture are eliminated by changing the quality and quantity of the fuel-air emulsion with adjusting screws.

Practical recommendations for eliminating typical fuel system faults

• If a cold engine does not start, you must first make sure that the spark plug and the ignition system as a whole are working properly. The power unit starts up after several attempts and stalls - perhaps there is water in the carburetor float chamber, contamination of the gas line, or vacuum in the gas tank due to a faulty drain valve.
• The reasons for difficult starting and unstable speed in operating modes may be caused by poor quality or long-term storage of the fuel used. If the engine does not hold idle speed, there is every reason to check the cleanliness of the jets.
• Using a branded kit, the owner of the Shtil MC 180 saw can repair the carburetor at home. Disassembling the product is carried out in a certain sequence; before assembling the carburetor, it is necessary to make sure that the float is tight and both jets are clean.

Fuel Consumption Standards for a Stihl 180 Chainsaw

Content

Chainsaw Stihl MS 180 – a tool worthy of attention

Of course, every modern person strives to purchase a high-quality chainsaw, which would be distinguished by reliability, the highest working life, efficiency and good technical features. The Stihl MS 180 chainsaw fully complies with all these aspects. We will talk in detail about its advantages, common breakdowns and self-repair.

Structure of the Shtil MS 180 chainsaw - model components

The design of the Stihl MS 180 chainsaw is quite difficult to call ordinary - this is due to the operating method of this model. The Shtil 180 chainsaw consists of the following components:

The manufacturer took into account the possibility of constant operation of the chainsaw at low temperatures, which resulted in the presence of a proprietary set of accounting programs for a smoother and faster start of the engine.

Chainsaw Shtil MS 180 – technical specifications

In terms of performance indicators, the Stihl MS 180 chainsaw is superior in almost every way to analogues in its own price category. This tool, as well as its modification – the Shtil 180 C chainsaw, has the following technical properties:

• Power – 5 l. With.;
• Cylinder displacement – ​​31.8 cm3;
• consumption
  – 0.7 l/h;
• Fuel tank capacity – 250 ml;
• The volume of the oil supply tank is 145 ml;
• Idle speed
  – 2800 rpm;
• Start – manual;
• Chain lubrication – automatic;
• The length of the tires used is 30–35 cm;
• Chain pitch – 3/8''v
• Working weight – 4.2.7 kg.

READ How to Roll a Band Saw into a Ring

Chainsaw Shtil MS 180 does not require special care. The only thing that the owner needs is to use high-quality fuel and add oil just in time. The diameter of the file for sharpening the chain of the Stihl MS 180 chainsaw should be 4.5–5 mm.

Features of operating the Stihl MS 180 chainsaw

This model of chainsaw, as well as its modification – the Shtil MS 180 C BE chainsaw, is not difficult to use. Below we will study the main operating rules that will protect the main spare parts and mechanisms of the chainsaw from early wear.

How to dilute gasoline for a Shtil 180 chainsaw?

The chainsaw motor must run on a properly prepared mixture of gasoline and oil. The higher the quality of these two components, the longer your garden tool will last. The proportion of oil and gasoline is also of great importance.

How to start the Shtil 180 chainsaw correctly?

The correct procedure for starting a chainsaw is as follows:

1. Before starting the saw, the chain brake must be activated. For this purpose, you need to tilt the brake lever forward;
2. Next you will need to remove the protective cover;
3. Next you need to press on the decompression valve - this will make starting the engine much easier;
4. Then press the fuel pump a couple of times. This will reduce fuel consumption specifically when starting the saw motor;
5. Then move the combination throttle lever down to the cold start position. For this purpose it will be necessary to first activate the throttle lever;
6. Slowly pull the cable until you feel resistance. Then quickly pull the cable only towards you until you hear the engine start and stall;
7. Then move the combination lever up one position;
8. Pull the cable again until the engine starts;
9. Once the engine has started, press the gas trigger, and, moving the combination lever
   to the upward position at full speed, release it;
10. Release the chain brake lever by pulling it towards you until it clicks;

Fuel consumption of a conventional chainsaw. REAL!!! WITHOUT BRE.

Ordinary Chinese chainsaw

. I work moderately. No tricks. I pour 35-40 grams of oil per 1 liter of gasoline. Oil .

STIHL MS 180 HOW TO ADJUST THE CARBURETOR \How to adjust carburetor STIHL chainsaw MS 180

How to adjust the carburetor Stihl ms 180

what are the min and max speeds? And also a similar video about adjustment on mine.

READ Trimmer STIHL fuel consumption

How to break in a new Shtil 180 chainsaw?

When starting to use the Stihl MS 180 chainsaw, most owners of the tool do not know how to properly break in the purchased saw. To do this, you must proceed in this order:

1. Check for the presence of chain oil - to do this, place the saw on an old newspaper and start the tool. If there is oil, traces of it will appear on the paper;
2. Next, turn off the inertia brake;
3. After this, start the chainsaw and leave it idling for 20 minutes. In this case, every minute you need to briefly press the gas trigger;
4. After 20 minutes, start sawing thin branches, gradually increasing the density and diameter of the wood.

Chainsaw Shtil 180 - malfunctions and repairs

In the case of the Stihl MS 180 chainsaw, malfunctions and methods for eliminating them may be different. In order to be able to independently fix breakdowns of the Stihl MS 180 chainsaw, we will study the most common causes of breakdowns and methods for eliminating them on our own.

The chainsaw does not start - reasons and repairs

If you notice that your saw has stopped starting, this may indicate that the engine oil is filling the spark plug of the tool. To inspect the spark plug, you need to pull out the rubber cap on the body and unscrew the part with a spark plug wrench. If you see large oil stains on the spark plug, this means that this is the cause of the breakdown.

Stihl MS 180 chainsaw stalls at idle

The most common reason for this is improper adjustment of the saw's carburetor. If the saw does not hold idle speed, you will need to re-adjust the tool assembly. To do this, take the adjusting key from the saw kit and insert it into the “” screw on the tool handle. While doing this, slowly turn the screw clockwise until the saw starts to operate normally.

Gasoline does not flow - independent solution to the problem

The reason for this lies in the malfunction of the carburetor. To repair the unit, it will need to be dismantled. However, before disassembling the carburetor on the Shtil 180 chainsaw, do not forget to disconnect the throttle linkage and the ignition wire from it. The next steps are as follows:

1. The carburetor device is attached to the saw structure using 4 screws. Unscrew them and remove the assembly from the chainsaw. Before removing the carburetor, be sure to wear gloves to avoid getting oil on your hands;
2. Before cleaning the carburetor, you will need to apply a household degreaser to its walls. Wait 5 minutes and start wiping the walls of the knot;

1. Remove the starter cover and remove the 4 screws;
2. Inspect the parts responsible for spark formation. If they are clean, then make sure that the gap between the magnets and the flywheel is correctly set. A gap of 0.4 mm will be considered optimal.

READ Adjusting the Oil Supply to the Husqvarna Chainsaw Chain

In order not to resort to regular carburetor repairs, try to use high-quality fuel and oil from trusted manufacturers.

The chainsaw does not start well - we are looking for reasons

If your saw does not start when cold, then the first thing to do is inspect the pistons of the tool. The piston group of the Stihl MS 180 saw is highly reliable, however, due to a lack of engine oil or mechanical shock, immediate replacement of the piston may be required. Before changing the piston, we advise you to study the specified algorithm:

1. Remove the top cover of the saw and unscrew the spark plug;
2. Remove the shock absorber stoppers, drive sprocket and starter;
3. Next, the flywheel, worm drive and winch chain are removed;
4. Then remove the ignition coil and muffler;
5. At the end, the piston group of the chainsaw is dismantled.

Oil is not supplied to the chainsaw chain

If you notice this malfunction, then the first thing you need to do is adjust the oil supply. Adjusting the oil supply to the chain is as follows :

1. Locate the adjustment screw on the bottom of the chainsaw next to the sprocket;
2. To increase the oil supply, the screw will need to be turned in the “” direction;

Replacing the starter cord

If you pull the cable too hard, sooner or later you will have to replace it. This is quite easy to do. To do this, proceed in this order:

Source

Saw set

Chainsaws of various modifications are equipped with branded tires 14 and 16 inches long, respectively, with STIHL Oilomatic 3/8 inch saw chains. Oil for cooling and complete lubrication of the cutting mechanism is supplied from a 150 ml tank to the cut by a non-regulated oil pump.

The list of mandatory equipment includes a saw chain tensioning device and a chain locking system that is triggered in the event of a kickback or other traumatic event. The chain stops in a minimally short time from a light blow to the back of the protective barrier.

Today, Shtilevsky sets are at the level of the best world and European samples in terms of quality and durability.

Chains for chainsaw Stihl MS 180

One of the most common questions about the chain for the 180 Shtil is: “Chain for the Shtil 180 chainsaw - how many links?” We asked and we answer))

Number of links:

• Tire 14″ (35 cm) long - 50 links.
• Tire 16″ (40 cm) long - 55 links.

Types of chains suitable for Shtil MS 180:

Chain Stihl Picco Micro Mini Comfort 3(PMMC3)

Chain Stihl Picco Micro Comfort 3(PMC3)

Chain Stihl Picco Duro(PD3)

Chain price for Stihl MS180 chainsaw

Since the 180th Shtil is our most popular chainsaw, therefore, a great variety of chains are produced for it. Among this variety there are both frankly unusable products and quite decent analogues.

The original chain from Stihl 50 links with a pitch of 3/8 as of 07/11/2019 retails for 550 rubles.

Buy chains for Stihl MS180 chainsaw:

Video about Stihl Oilomatic chains

Sharpening saw chains:

Before sharpening the chain, it must be cleaned of dirt. Then you need to select one link as the starting link. Place the chainsaw on a stable surface. Sharpening can be done in several ways:

Manual chain sharpening machine

Read how to use files and devices for manual chain sharpening here: File for sharpening chainsaw chains. Sharpening devices. Watch a video on sharpening chains

Watch a video on sharpening chains with an electric machine

Sharpening saw chains

Chainsaw Sthil MS 180 chain: types, sharpening, tension….

Source: benzopilatut.ru

Modifications

Taking into account the wishes of users, two technically advanced versions were developed on the basis of the main model. The MS 180 C-BE chainsaw is distinguished by the presence of the STIHL ErgoStart easy start system, a device for quick chain tensioning located in the carburetor of the fuel compensator.

The characteristics of multi-channel mixture formation of the engine and vibration damper have been significantly improved, and operator comfort has been increased due to the single-lever control circuit.

Another version of the Stihl MS 180 Picco takes advantage of the operational benefits of an automated lubrication system. This model is equipped with only 14 inch tires and saw chains with 50 links.

Technical characteristics of the Stihl 180 ms chainsaw

Characteristics of the Stihl 180 ms chainsaw:

• power 1500 W;
• 31.8 cc engine cm;
• idle speed - 2800;
• maximum speed - 9000;
• tire 35 cm;
• Shtil type chain Oilomatic Picco Micro 3;
• fuel tank for 250 ml of gasoline;
• chain pitch 3/8;
• noise level during operation 110 dB.

The Stil 180 chainsaw passport is the most important document containing all the technical characteristics of the tool. It indicates how to properly dilute gasoline for a Shtil 180 chainsaw, how to run it in, and how to perform maintenance.

A pressing question is how many links are there in a chain for a Stihl 180 chainsaw. Usually the number of links in an original branded chain from Stihl is 50, but if you use chains from another manufacturer, the number of links may be different, since the pitch of the chain is important, that is, the distance between the links, and not their number.

Chainsaw Stihl MS 180

How to eliminate the risks of purchasing counterfeit goods?

On the domestic market, there are a small number of more or less successful copies of popular branded chainsaws, which are an order of magnitude inferior to branded designs in terms of reliability and durability.

There are many ways to distinguish an original from a fake, but the most reliable option for purchasing a quality instrument is to contact a company store or a sales office of an official dealer. The above fully applies to the entire range of replacement equipment and consumable components.

Advantages

Over the past decade and a half, the design of the chainsaw has not become morally obsolete; moreover, it meets the basic requirements of current regulatory standards.

The indisputable advantages of the Shtil MS 180 Model:

• affordable price for a wide range of consumers;
• optimal specific gravity indicator;
• ergonomic body configuration, shape and position of the handles, ensuring a reliable grip of the tool when performing labor-intensive and complex sawing work;
• low-cost operation in terms of fuel consumption and the cost of the repair range;
• stability of the operating parameters of the tool throughout the entire service life;
• high maintainability and interchangeability of standardized spare parts and consumables with models produced in previous years.

Analogs

Worthy competition for this model comes from domestic class household chainsaws of the same type in terms of power and application from leading European and Asian manufacturers. The Russian market offers models identical in basic parameters - Husqvarna 236 X-TORQ, Oleo-Mac GS 35C-14, Hyundai X 380 and MTD GCS 3800/35.

Owner reviews

I vote for the Stihl chainsaw model 180 with both hands. I was lucky with the purchase of a German-assembled instrument. I have been using it for four years with peace of mind. I am involved in clearing building sites and sawing wood fuel. Without any hesitation, I take on the most urgent and urgent work. Judging by the reviews of my colleagues, the quality of the latest batches of Chinese-assembled saws does not inspire confidence. Therefore, when purchasing a spare tool, I chose the Italian Oleo Mak chainsaw. Sergey

During the first test of the Shtil 180 chainsaw, a large number of various defects were discovered. The service sensibly explained that this is a Chinese counterfeit and is not covered by warranty. With a big scandal, we managed to return the fake to the seller, but the mood disappeared for a long time. Friends dissuaded me from buying the next, 181st model. Apparently, not everyone is satisfied with the quality of Chinese components and especially assembly. I will look for a full-fledged analogue of the European assembly, although the cost of such a tool is one and a half times higher. Vladimir Romanovich

Chainsaw Shtil 180 - malfunctions and repairs

In the case of the Stihl MS 180 chainsaw, malfunctions and methods for eliminating them may be different. In order to be able to independently fix breakdowns of the Stihl MS 180 chainsaw, we will study the most common causes of breakdowns and methods for eliminating them on our own.

The chainsaw does not start - reasons and repairs

If you notice that your saw has stopped starting, this may indicate that the engine oil is filling the spark plug of the tool. To inspect the spark plug, you need to pull out the rubber cap on the body and unscrew the part with a spark plug wrench. If you see large oil stains on the spark plug, this means that this is the cause of the breakdown.

If the saw does not develop speed, then the first thing to do is to wipe and dry the chainsaw spark plug. You will also need to dry the chamber in which the candle was located. The next step is to replace the oil pump that was leaking engine oil. To do this, you need to remove the saw body and unscrew the screws holding the rubber primer. After this, the upper part of the pump is removed.

Stihl MS 180 chainsaw stalls at idle

The most common reason for this is improper adjustment of the saw's carburetor. If the saw does not hold idle speed, you will need to re-adjust the tool assembly. To do this, take the adjusting key from the saw kit and insert it into the “+” screw on the tool handle. While doing this, slowly turn the screw clockwise until the saw starts to operate normally.

Gasoline does not flow - independent solution to the problem

The reason for this lies in the malfunction of the carburetor. To repair the unit, it will need to be dismantled. However, before disassembling the carburetor on the Shtil 180 chainsaw, do not forget to disconnect the throttle linkage and the ignition wire from it. The next steps are as follows:

1. The carburetor device is attached to the saw structure using 4 screws. Unscrew them and remove the assembly from the chainsaw. Before removing the carburetor, be sure to wear gloves to avoid getting oil on your hands;
2. Before cleaning the carburetor, you will need to apply a household degreaser to its walls. Wait 5 minutes and start wiping the walls of the knot;

After cleaning the carburetor, you need to re-adjust the ignition of the chainsaw. You can find out how to set the ignition in the saw's operating manual. If you have lost the instructions and do not know how to adjust the ignition, then proceed in this order:

1. Remove the starter cover and remove the 4 screws;
2. Inspect the parts responsible for spark formation. If they are clean, then make sure that the gap between the magnets and the flywheel is correctly set. A gap of 0.4 mm will be considered optimal.

In order not to resort to regular carburetor repairs, try to use high-quality fuel and oil from trusted manufacturers.

The chainsaw does not start well - we are looking for reasons

If your saw does not start when cold, then the first thing to do is inspect the pistons of the tool. The piston group of the Stihl MS 180 saw is highly reliable, however, due to a lack of engine oil or mechanical shock, immediate replacement of the piston may be required. Before changing the piston, we advise you to study the specified algorithm:

1. Remove the top cover of the saw and unscrew the spark plug;
2. Remove the shock absorber stoppers, drive sprocket and starter;
3. Next, the flywheel, worm drive and winch chain are removed;
4. Then remove the ignition coil and muffler;
5. At the end, the piston group of the chainsaw is dismantled.

After this, carefully inspect the unit and the space underneath it. If necessary, clean contaminated surfaces and install a new piston group.

Oil is not supplied to the chainsaw chain

If you notice this malfunction, then the first thing you need to do is adjust the oil supply. Adjusting the oil supply to the chain is as follows:

1. Locate the adjustment screw on the bottom of the chainsaw next to the sprocket;
2. To increase the oil supply, the screw will need to be turned to the “+” side;

After this, place the saw on the paper and start it. If you did everything correctly, drops of oil will appear on the paper.