Winter fishing involves the use of an ice ax. It helps to make holes with a diameter of more than 20 cm, but not every angler is ready to carry a heavy motorized device with him.
Therefore, resourceful fishermen use a regular screwdriver.
It is the best alternative due to its small size, weight and reasonable cost. But which screwdriver should you choose for ice drilling?
We have compiled a rating of the best screwdrivers for ice drills in terms of price/quality ratio, the most popular in 2021.
The review is based on real consumer reviews, expert assessments and tests.
Rating of the TOP 12 best screwdrivers for ice drills 2020-2021
| Place | Name | Price |
| TOP 6 best cordless screwdrivers for ice augers with high torque | ||
| 1 | DeWALT DCD991NT | Find out the price |
| 2 | Makita DDF481Z | Find out the price |
| 3 | DeWALT DCD796D2 | Find out the price |
| 4 | Metabo BS 18 LTX BL I | Find out the price |
| 5 | DeWALT DCD996P2 | Find out the price |
| 6 | Metabo BS 18 LTX Impuls 2013 | Find out the price |
| TOP 6 best cordless screwdrivers for ice axes with high torque | ||
| 1 | DeWALT DCD791NT | Find out the price |
| 2 | DeWALT DCD791D2 | Find out the price |
| 3 | Metabo BS 18 LTX BL I LiHD | Find out the price |
| 4 | Makita DHP458RFE | Find out the price |
| 5 | Makita DHP451RFE | Find out the price |
| 6 | Makita DDF481RTE | Find out the price |
How to choose a screwdriver for an ice auger?
When choosing a screwdriver for an ice auger, you need to pay attention to some parameters:
- Power . It must be at least 18 W. But it is best to choose models whose power is 36 W, because the more powerful the tool, the easier it is for it to cope with a thick layer of ice.
- Torque . The minimum indicator is 50-70 Nm, but if financial capabilities allow, then it is better to choose a model with 80-90 Nm. The higher the torque, the easier the drilling process will be.
- Durability and reliability . Preference should be given to proven brands of foreign and domestic manufacturers that have proven themselves to be the best.
- Additional handle . Thanks to it, the ice auger can be held with both hands. This will protect your limbs from unnecessary injuries that will ruin the entire winter fishing experience.
- Battery and its capacity . Nickel-metal hydride is optimally suited for a screwdriver, as it has high frost resistance. The battery capacity must be at least 2.5-3 Ah for fast drilling.
Top 3. Metabo BS 18 LTX Impuls
Rating (2021): 4.68
50 reviews from resources were taken into account: Yandex.Market, Otzovik, Ozone, DNS, All Tools
The most reliable tool A brand that fully confirms the stereotype of German quality. Only the best materials are used in production and special attention is paid to build quality, thanks to which the screwdriver lasts several years longer than analogues from other manufacturers.
- Characteristics
Average price: 26,300 rub.
- Country: Germany
- Torque (Nm): 110
- Chuck diameter (mm): 14
- Maximum speed: 1700
- Motor type: brushless
- Battery capacity (Ah): 4
If you need the most reliable cordless screwdriver and you are willing to pay more than 25 thousand rubles for it, be sure to pay attention to this product. This is true German quality, confirmed not only by customer reviews, but also by tests of various experts. The tool shows the best result in terms of durability, even under the highest loads on it. The brushless motor has increased efficiency, and 110 Newtons of torque will allow you to cope with thick and dense crust. There are also all known protection systems: against overheating, overload and moisture. In general, an ideal option for winter fishing, although not the cheapest.
Advantages and disadvantages
- Quality components and materials
- Reliable build
- Popular brand
- Many protective functions
- Heavy tool weighing 2 kilograms
See also:
- 15 best ice screws
TOP 6 best cordless screwdrivers for ice augers with high torque
This TOP includes models with high power and efficiency, as well as ergonomics and light weight, which ensure comfortable work for a long time.
DeWALT DCD991NT
The DeWALT DCD991NT screwdriver is a non-impact model and demonstrates an impressive torque of up to 95 Nm, which makes it a good choice for screwing and unscrewing tight fasteners.
It is suitable for active professional use and is equipped with a quick-release chuck, which guarantees easy replacement of accessories. The chuck has a clamping diameter of 13 mm and securely fixes equipment for any purpose.
The device can also be used as a productive cordless drill, which allows drilling holes with a diameter of up to 55 cm in wood and 13 mm in metal.
The product is equipped with an ergonomic handle that is comfortable even during long-term use and is powered by a battery. The battery capacity is 5 Ah, with an output voltage of 18 W. The kit, which includes a screwdriver, replaceable batteries and a network charger, is placed in a branded case.
Characteristics:
- Power - 650 W.
- Number of speeds - 3.
- The number of torque stages is 12.
- Battery capacity - 5 Ah.
pros
- Bright backlight.
- Good batteries.
- Price.
Minuses
- Poor quality assembly.
- No bat included.
Makita DDF481Z
The Makita DDF481Z features a brushless electric motor that delivers spindle speeds of up to 2100 rpm and an impressive 115 Nm of torque for such a small tool..
The device is capable of tightening and unscrewing any fastener and drilling holes with a diameter of 76 mm in wood and 13 mm in metal.
Its quick-release chuck can hold a bit or drill with a shank size of up to 13 mm.
The high performance and operating efficiency of the product is ensured by the rechargeable battery, which has an output voltage of 18 V and a capacity of 5 Ah.
The tool is equipped with two removable batteries, a charger for them, and a case with a handle for storage and carrying..
In addition, the model is equipped with a holder in the form of a clip, with which you can easily hang the device on your belt while performing work.
Characteristics:
- Number of speeds - 2.
- Clamp diameter: 13 mm.
- Battery charge - 5 Ah.
- Voltage - 18 V.
pros
- Power.
- Comfortable handle.
- Backlight.
Minuses
- The spindle often fails.
- Price.
DeWALT DCD796D2
The DeWALT DCD796D2 small brushless drill features new 2Ah batteries and a brushless motor that delivers excellent performance..
Thanks to its compact dimensions, the drill can be used even in confined spaces.
The product is equipped with a quick-release chuck, thanks to which changing equipment does not take much time.
The built-in backlight ensures comfortable and long-term operation in poor visibility conditions. A metal clip is provided for attaching the device to a belt.
The product includes metal gears, a two-speed gearbox, which increases the operating time of the drill.
The rubberized, comfortable handle increases ease of use, and the removable battery allows you to quickly assemble and disassemble the product.
Characteristics:
- Torque - 70 Nm.
- Number of speeds - 2.
- The cartridge size is 13 mm.
pros
- Excellent cooling system.
- Long warranty period.
- Speed adjustment.
Minuses
- The backlight cannot be turned off.
- High sound power level.
Metabo BS 18 LTX BL I
The heavy-duty cordless drill/driver Metabo BS 18 LTX BL I has a brushless motor and a high torque of 120 Nm.
The device belongs to the category of professional hand tools and can easily cope with large volumes of high-intensity serial work.
A screwdriver is useful in construction and finishing work.
At the first speed of 500 rpm, the model allows you to quickly tighten and unscrew screws, screws, self-tapping screws and confirmations of large diameter and length.
At the second speed of 1850 rpm, the model allows you to effectively drill small holes in steel, non-ferrous metals and alloys, wood and polymers.
The product also features an electronic Precision Stop system that regulates torque for precise machining..
The main design element of the product is a maintenance-free brushless electric motor. In addition to high power, the device has a high efficiency rate and is resistant to overloads.
Characteristics:
- Torque - 120 Nm.
- Speed: 1850 rpm.
- Voltage - 18 V.
pros
- Powerful.
- Fits comfortably in the hand.
- Price.
Minuses
- Heavy.
DeWALT DCD996P2
The DeWALT DCD996P2 cordless screwdriver is equipped with a brushless motor and operates on a 5 Ah lithium-ion battery with XR technology, which allows you to increase the operating time of the model on a single charge.
The device also has three operating modes and a maximum torque of 80 Nm for efficient and high-quality work.
Three built-in LEDs provide bright illumination of the work area in dark rooms.
The tool is easy and convenient to use for a long time.
The model has good protection against overheating, and the presence of an impact mechanism increases the range of use of the tool.
Low vibration level allows the device to operate for a long time.
By adjusting the speed, the device can be configured for high-quality work for the specific task being performed.
Characteristics:
- Battery charge - 5 Ah.
- Output power - 820 W.
- Torque - 95 Nm.
pros
- High quality build.
- Backlight.
- Power.
Minuses
- Heavy.
- Weak battery connection.
Metabo BS 18 LTX Impuls 2013
The Metabo BS 18 LTX Impuls 2013 device is a reliable professional device for a wide range of uses.
It has a high torque of 110 Nm, so it can easily tighten large screws.
The maximum size of holes in wood is 65 mm, which is useful not only when constructing garden furniture, but also for creating decorations from plywood or timber and as an ice drill.
The model has a quick-release chuck, so changing bits and drills will not take much time.
The product is equipped with an additional comfortable handle, which allows you to hold the tool more firmly.
The body of the product is lined with soft inserts, which ensures a secure grip and dampens vibrations..
A metal clip is provided for wearing on a belt.
Characteristics:
- Voltage - 18 V.
- Torque - 110 Nm.
- The cartridge size is 13 mm.
pros
- Includes 3 batteries.
- Reliable.
- Functional.
Minuses
- There's a lot of electronics in the charger.
- Price.
Cordless Impact Wrench For Ice Drill Which Is Better
When winter fishing, the presence of an ice drill is as indispensable as a fishing rod with bait.
Now there are no problems with such equipment, since the market offers a huge number of specialized automatic drills. Nevertheless, the price of such devices forces most fishermen to turn to other and cheaper options for similar devices. Experts in winter fishing advise immediately using a screwdriver for an ice auger
. Which one to choose is the main question, because there are several criteria for evaluating a suitable device.
And choosing a base for a drill is not enough. You also need to know the technique of assembling such tools and other aspects.
Just like for which the design of other tools is intended, it would be useful to estimate at least the average complexity of the future work with ice. Approximate data will allow you to make a clearer choice.
When working with a universal device is meant, two main indicators should be taken into account - power and torque, which the ice . Which device to choose based on performance – here it’s worth starting from the voltage. The power must be two or more 18 V.
If you need to work with thick ice on your hands for an excellent amount of money, then you do not need to give up the model with a voltage of 36 V. This very feature will determine what the power potential of the ice drill
, and its ability to seep into the most problematic layers of the ice cover.
Don't forget about torque either. This commonly heard parameter varies from approximately 50 to 70 Nm.
This value will determine the rotation speed of the auger. In addition, the higher the torque, the easier the drilling task will be. Using the adapter, the screwdriver is connected to the working part of the device, in other words, to the drill. By and large, with the help of such an adapter you can make a real power tool from any auger designed for manual use. The main thing is to correctly compare the sizes of these components.
Screwdriver for ice auger metabo ltx18 impuls set burn holes! winter fishing with a screwdriver!
The adapter is provided with a special shaft of an unfamiliar drill and a hex head for a screwdriver. The characteristics are as follows: the length of the shaft is 6.8 cm, and the clearance from the mount to the end. 2.6 cm. For the possibility, the “adapter” diagram. ice screw screwdriver” was correctly formed in reality, it is necessary to find out the diameters. Necessarily, standard sizes vary from 1.8 to 4.5,4.5 cm.
It is better to get adapters with handles and a special stop to protect them from falling out. It is impossible to imagine # in cases where these same teeth are missing, any structural addition will reduce the productivity of the drill during operation.
However, specific fishermen note that the main priority in the work is the convenience of handling the device, and the power of the screwdriver is almost always sufficient in excess.
Of course, you will have to choose only from battery-powered models, since there will be no access to the network while fishing. Therefore, it is necessary to note three battery options for a screwdriver:
- Li-Ion type element. Such batteries charge quickly and are lightweight. But they also have a severe drawback - intolerance to severe frosts.
- Nickel-cadmium battery. In our version, the situation is reversed. The battery can withstand temperatures up to 150 ºC, but its weight significantly makes the drill heavier.
- Nickel metal hydride elements. If you need a medium-weight ice drill for a screwdriver, which you don’t plan to use often, then this particular option is suitable. It weighs less compared to the previous battery and does not cause any particular problems in the cold.
To summarize in this part, then, based on the experience of experienced fishermen, it is still optimal to call nickel-cadmium batteries. Despite the heavy weight, such batteries provide the best and highest degree of reliability in cold weather - as is known, the key main advantage of gaming slots for fishermen during cold weather.
At the final assembly stage, three main elements should be available. These specifically include an auger, a screwdriver and an adapter. It is advisable to use components from one company. For example, purchase a drill in one set with an adapter, then connect the device to the drill.
On the contrary, you have to deal with various designs, so at first it is better to get models with hinged joints. This configuration expands the options for assembling an ice auger from a screwdriver.
How to make a homemade electric drill from various components? If the components match each other in diameter, then it will be quite secure to fix the auger and screwdriver on different sides of the adapter. On the contrary, of course, the difference in diameters means that the adapter will have to be modified.
This element has two parts - a shank for a drill and a hexagon for a drill. All possible alterations involve the inclusion in the design of an L-shaped hex key, which is selected strictly to the required dimensions.
Comparing the hybrid design, which includes an auger and drill, with automatic ice drills and modifications from a chainsaw, one can imagine that there are a huge number of shortcomings in such a device. But experienced fishermen, not only for the sake of economy, prefer a screwdriver for an ice drill .
Which option to choose in terms of power and standard size is decided each time personally. It’s important just not to forget about the low power and torque values.
But experienced users note other advantages - these are, first of all, ease of assembly, functionality, reliability and wide possibilities for modifications.
It is difficult to argue that almost everything in the success of drilling depends on the chosen drill with an adapter. However, it is worth considering the properties of the screw. Since the myth element will complement the screwdriver for the ice auger . Which auger to choose? First you should pay attention to the metal. Stainless steel and cast iron are popular now.
Next, you should take into account the standard size and shape - the quality and convenience of drilling the ice cover also depend on these characteristics.
In any case, the choice of each component for the upcoming ice drill should be made based on the parameters of the general requirements for the device and assessing the capabilities of the upcoming structure assembly in advance.
Cheap screwdriver and ice axe, new Chinese versus old American
Source: https://ctln.ru/gajkovert-akkumuljatornyj-dlja-ledobura-kakoj/
TOP 6 best cordless screwdrivers for ice axes with high torque
With the help of models with high torque, you can quickly form a hole even on a thick layer of ice.
DeWALT DCD791NT
The DeWALT DCD791NT cordless model is designed for drilling holes in concrete, wood and for driving screws into various materials..
The product is a powerful representative of the line of cordless screwdrivers, which are made in a compact form and are characterized by mobility.
The device operates from a rechargeable battery, which allows you to perform operations in different places where there is no electrical network.
In the central part of the screwdriver there is a rubberized handle, which allows you to firmly hold the model in your hands, even if the worker’s hands are a little wet.
The product has several speeds for performing operations with screws and drilling, which allows you to adjust with maximum precision to the material with which you will be working..
There are belt mounts at the bottom, which allows the worker to attach the tool to a belt, freeing his hands.
Characteristics:
- Torque - 70 Nm.
- Speeds - 2.
- Shank size - 13 mm.
- Spindle speed: 550 rpm.
pros
- Comfortable handle.
- Belt brace.
- Price.
Minuses
- Inadmissible chuck runout.
DeWALT DCD791D2
The DeWALT DCD791D2 screwdriver is great for repair work . It combines
good functionality and a powerful cordless drill for working with different types of fasteners.
The device provides a maximum torque of 70 Nm and allows you to fix a drill or bit with a shank size of 13 mm in a quick-release chuck.
Using this cordless device, you can effectively drill holes in wood up to 40 mm in size and in metal up to 13 mm in size. The screwdriver has fifteen stages of torque adjustment and has a comfortable handle with thoughtful ergonomics, which is equipped with anti-slip rubber pads.
The device comes with two replaceable batteries with a capacity of 2 Ah, which are suitable for active and professional use..
It is placed in a special case for storage and transportation along with the battery.
Characteristics:
- The cartridge size is 13 mm.
- Torque - 70 Nm.
- Number of speeds - 2.
- Idle speed - 2000 rpm.
pros
- Metal cartridge.
- Convenient case.
- Backlight.
Minuses
- Price.
- Chinese assembly.
Metabo BS 18 LTX BL I LiHD
The Metabo BS 18 LTX BL I LiHD device has a battery, pulse mode of operation and is designed for drilling holes and working with fasteners.
The device operates thanks to a high-capacity lithium-ion battery and charger.
The brushless motor of the model does not require regular replacement of brushes and has a long service life.
Its two-speed gearbox at 500 and 1800 rpm allows you to configure settings for working with fasteners and drilling various materials.
By adjusting the torque, you can select the tightening force in the range from 60 to 120 Nm. The model is equipped with a quick-release chuck for equipment with a 13 mm shank.
The internal hexagon of the spindle allows the use of bit attachments without a chuck.
Bright backlighting, a battery charge indicator and a metal hook for attaching to a belt make work comfortable.
Characteristics:
- Battery charge - 5.2 Ah.
- Voltage - 18 V.
- Torque - 120 Nm.
pros
- Comfortable to hold.
- High power.
- Price.
Minuses
- Heavy.
Makita DHP458RFE
The Makita DHP458RFE is an excellent choice for drilling holes and working with fasteners.
The device is equipped with a quick-release chuck, which is characterized by a high speed of changing equipment and the same reliability.
You can apply two speed modes and 20 torque levels.
A high level of performance is achieved by an 18-volt battery that powers the device.
The torque figure of 91 Nm is impressive: you can tackle even the most demanding tasks. The impact mechanism adds efficiency to the product.
The product has electronic overload protection and the comfort of its operation is affected by LED illumination of the working area.
The gearbox of the device is made of metal. The kit includes two batteries, a bit, the necessary documents, an additional handle, a charger, a case and a belt clip.
Characteristics:
- Speeds - 2.
- Torque stages - 20.
- The clamp size is 13 mm.
pros
- Power.
- Reliability.
- Convenient to use.
Minuses
- Inconvenient lighting.
- Price.
Makita DHP451RFE
The Makita DHP451RFE impact drill/driver has a durable nylon body with ventilation holes, which contributes to a long service life.
Twenty torque modes have been developed for unscrewing and tightening screws; modes for convenient and simple drilling are included separately.
The maximum permissible maximum for drilling bricks is 8 mm . The peak screw size is 10mm. The device also has LED backlighting. You can replace the carbon brushes yourself.
The model will be useful for builders, furniture assemblers, carpenters, electricians, decorators and fishermen for drilling through a thick layer of ice.
The screwdriver includes a quick-release chuck for easy changing of accessories, a reverse function, an ergonomic handle, and replaceable carbon brushes for economical engine maintenance and increased service life.
Characteristics:
- Battery charge - 5 Ah.
- Voltage - 18 V.
- The cartridge size is 13 mm.
- Speeds - 2.
pros
- Excellent powerful device.
- Functional.
- Several operating modes.
Minuses
- Price.
- Heavy.
Makita DDF481RTE
The powerful Makita DDF481RTE screwdriver has 115 Nm of torque for heavy-duty work indoors and outdoors..
Such high power makes this device popular among fishermen for ice fishing. This model has a brushless motor, which increases the service life and makes operation easier.
The model is capable of tightening or unscrewing any fastener and allows you to drill holes with a diameter of 76 mm in wood, 13 mm in metal.
Its quick-release chuck allows you to quickly lock a bit and a drill with a shank size of 13 mm.
The operating efficiency and high performance of the device is achieved thanks to its rechargeable battery, which has an output voltage of 18 V and a capacity of 5 Ah.
The tool comes with two removable batteries, a charger for them, and a case with a handle for storage and transportation..
The latter has a holder in the form of a clip, with which you can hang it on your work belt while performing work.
Characteristics:
- Speeds - 2.
- Torque - 22.
- Voltage - 18 V.
pros
- Backlight.
- Power.
- Holds a charge for a long time.
Minuses
- Heavy.
- Expensive.
