TOP 4 budget chainsaws from the domestic manufacturer Lesnik

Forester 3816

The Lesnik 3816 chainsaw will be a reliable device for those who often deal with small amounts of woodworking work: builders, gardeners. This is a hand balanced chain technique.

Specifications:

• motor thrust - 2 hp;
• chain pitch - 3/8 inch;
• weight - 4.9 kg;
• The volume of the gasoline container is 310 ml.

Among the advantages of the model are noted:

• minimal worker effort and precise sawing due to a well-balanced design;
• the gas tank is larger than other models;
• automatic lubrication of the cutting part;
• a tire with a pitch length that can be easily found on sale;
• ergonomics.

Among the disadvantages of the model:

1. Insufficiently developed motor part. Owners note that the saw often stalls and does not start. The starter cable can break at any moment, causing the spark plug to flood with fuel. You always have spare parts on hand to be able to continue working.
2. Chain lube is leaking. After each descent, the oil must be drained.
3. Frequent carburetor retuning. For an inexperienced person, even the 3-screw adjustment principle will be a problem.

The model is well suited for a garden plot as a tool characterized by a low price and high functionality.

TBP-4500

Another chainsaw that is sold under the Taiga brand is TBP-4500.

There is no particular difference with the previous model. The main difference is the motor power, which is 500 W more. Also, as standard, the saw comes with another saw set, which has a chain pitch of 0.325.

Due to a little more power and a different chain, the TBP-4500 is easier to cut through thick trees, but the difference is not particularly noticeable.

Externally, it is almost impossible to distinguish the TBP-4000 and TBP-4500 models, because they have the same dimensions, color, body details. Also, if necessary, you can install a piston group on one chainsaw from another, thereby adding or reducing power.

The video below shows the unpacking of the Taiga TBP - 4500 chainsaw. Equipment, assembly of the new saw and preparation for work. At the same time, the operator talks about the purpose and characteristics of the model.

Forester 4518

Chainsaw Lesnik 4518 is a technique for harvesting lumber for the winter and gardening. The chain mechanism and tire cope with wide tree trunks and large branches.

Peculiarities:

1. Engine 45 cm³.
2. Thrust - 2.9 hp. This is enough for long, heavy work.
3. Product design made of wear-resistant materials. Chrome protective coating on the cylinders to prevent wear. Forged metal was chosen as the material for the motor.
4. Light weight considering the materials used - 6 kg.
5. Metal front grip.
6. Electronic ignition. The product starts quickly and consumes less fuel.
7. Nylon air filter - reliable protection against dust.
8. Effective vibration suppression.
9. Automatic chain lubrication, ability to adjust the oil pump.
10. Sealed metal crankcase for oil filling.
11. Switching off the petrol engine in a few seconds due to a modified clutch.
12. Tool-free tensioning of the cutting mechanism.
13. Complete set with gear stop. Weight transfer allows for precise cutting.

Among the shortcomings, there is an inconvenient tension of the saw mechanism and an unfinished motor part. It reacts strongly to low-quality fuel and oil, and after long periods of inactivity it works with difficulty.

Basic equipment and production of Russian electric saws

When you purchase a “Lesnik” electric saw, you receive it in a box, unassembled, with the following equipment:

• bar and saw chain separately;
• universal key for assembly and maintenance of the saw;
• manual;
• warranty documents.

All products of the Lesnik company, not excluding gas and electric saws, are assembled by Chinese concerns and are certified and tested by Russian specialists. Thanks to this type of production, the tools have an affordable price for everyone and excellent quality, which owners constantly mention in their reviews.

Forester 2512

Model Lesnik 2512 is a universal product that is suitable for both professionals and inexperienced users. Scope of application: construction, garden plot. Easily copes with wide trunks and thick branches. It starts up quickly, makes smooth cuts in different directions, and is easily controlled with one hand.

Model features:

1. Motor thrust - 0.95 kW;
2. Chain with standard pitch - 44 links;
3. Weight - 2.9 kg;
4. Fuel capacity - 0.2 l;
5. Anti-vibration protection. Almost no vibrations reach the handle.
6. The package includes personal protective equipment and a flask for diluting the fuel mixture.
7. Easy controls.
8. The starting system is adapted to low temperatures.
9. Minimum physical load on the employee.
10. Modern appearance.
11. Rubber coating on the handle.

Among the disadvantages are the need to tension the chain, frequent breakdowns of the motor part, spark plugs and coils.

The nuances of saw operation

Before use, it is necessary to check the quality of the connection of individual working parts, the reliability of the chain tension and the condition of the electrical parts. Then you can start working. All manipulations must be carried out smoothly and without jerking to avoid the aforementioned tire jamming. Those who are used to working with chainsaws will also have to reconsider their skills. As already mentioned, “Lesnik” is an electric saw, reviews of which emphasize its lightness. Therefore, you won’t have to rely on pressure from the body itself on the workpiece. It is provided by manual force, but it must be exercised with extreme caution, because a small mass does not contribute to the stability and stability of the structure. After completing the cut, the working equipment must be removed, cleaned and, if necessary, lubricated. The condition of the engine and related components is also checked.

Forester 5220

Chainsaw Lesnik 5220 is a powerful device that produces 3.4 hp. Suitable for sawing work of any severity and duration, copes with trees of any diameter. Scope of application: repair and construction work.

Peculiarities:

1. Comfortable handles for holding the tool.
2. Effective vibration suppression system.
3. No unpleasant hum.
4. Uniform weight distribution between the main structural components.
5. Air filter with cover with easily removable bolts.
6. Electronic ignition allows you to get started quickly.
7. Automatic lubrication of cutting elements.
8. Start blocking.
9. Fuel capacity - 550 ml.
10. Weight - 6.5 kg.

Compliance with the rules of operation and maintenance of the device will extend its service life.

Advantages and disadvantages

The indisputable advantages of the Lesnik chainsaw model 3816:

• economical consumption of fuels and lubricants;
• combination of low weight, only 4.9 kg, with the traction characteristics of the drive and the operational capabilities of the tool as a whole;
• simplified schemes for low-time maintenance;
• the quality of the materials used and modern technologies for their processing;
• the maximum level of working comfort for budget-class chainsaws.

The reviews presented in the information field of owners of chainsaws of the 3816 series are mostly positive. The list of shortcomings includes unregulated fuel equipment, a significant shortage of branded spare parts, and there are justified user complaints about the build quality.

The average cost of a Lesnik chainsaw has stabilized at 6,500-7,000 rubles. You can buy tools at a lower cost in online stores or during seasonal and promotional sales.

Household chainsaws of the household class, identical in power and cost, are presented in the chainsaw equipment market with a large selection. Models from European and Asian brands CHAMPION 237-16, Huter BS-45M, Partner P340S-14, MTD GCS 3800/35 and Shtil 180 chainsaw are in consistently high demand.

Operation, maintenance and repair

Each product delivery kit contains operating instructions. Please read this document before use or any repair work. Compliance with the rules will extend the service life of the equipment and avoid unwanted mechanism breakdowns caused by improper handling.

The operating instructions describe such items as preparation for starting, preparing the fuel mixture, safe operation, recommended oils, troubleshooting and rules for storing the device in winter.

If possible, it is better to entrust chainsaw servicing to special workshops. But some problems can be easily fixed on your own. The Lesnik brand has typical saw breakdowns: the need to adjust the chainsaw carburetor, tire wear, engine malfunction.

Many users advise immediately after purchase to change the chain and bar to better ones.

Engine problems arise due to manufacturing defects or wear. More often than others, the carburetor fails. In order to repair the Lesnik chainsaw, refer to the instruction manual.

Basic recommendations for using electrical equipment:

1. Before working in winter, when the temperature outside is below freezing, you must first warm up the carburetor. Otherwise, the fuel will be viscous and crystallize.
2. Do not expose the instrument to sudden changes in temperature, otherwise condensation will form.
3. Manufacturers recommend using a special fuel mixture of oil and gasoline. The manual indicates the brands of oils that can be used for the tool. Gasoline must not be leaded.
4. You cannot use a fuel mixture that has been stored for more than 1.5 months. This will cause engine damage.
5. Work with the tool only in personal protective equipment, observing all safety rules.

Final check at idle

Problems with the bar and chain can occur almost immediately after purchase. It is recommended to replace with high-quality ones from OREGON. If the tire does not last for the first time, it is better to throw out the chain immediately. According to numerous user reviews, it stretches like plasticine.

Engine malfunctions are very rare and in most cases are due to wear and tear or manufacturing defects. But problems with the carburetor are not uncommon.

To diagnose carburetor breakdowns, it is better to use the operating instructions; it describes all possible faults and how to eliminate them. Upon completion of the repair, the carburetor will need to be adjusted. This is not so easy to do. Our article on setting up or the same operating instructions for the Lesnik 3816 chainsaw will help with this.

It is impossible to say definitively that any of the listed chainsaws are definitely better than Lesnik 3816. Each tool has its pros and cons. There are successful examples of using specific saws for several years, and there are also unsuccessful chainsaws that cause a lot of problems from the first day.

Need to do a little research. Acceleration of the device is initiated. It is necessary to evaluate the proper operation of the engine during maximum speed. When the engine is functioning correctly, it means that when you press the accelerator, the speed quickly increases to 15,000 rpm.

If this does not happen or the increase in speed is too slow, you must use the screw marked L. It turns counterclockwise. Moderate movements must be observed, since the turn cannot be more than 1/8 of a full circle.

Before this procedure, it is necessary to carry out a full adjustment of the carburetor components when operating at maximum speed. Next, you should check the functioning of the device in idle cold mode. When the correct adjustment parameters are achieved, you will notice that the carburetor design closely matches the following criteria:

1. When the idle cold mode is activated, the chain does not move.

1. When the accelerator is pressed even slightly, the engine accelerates at an accelerated pace. With gradual deepening of pressure, you can notice that the engine speed increases proportionately, reaching the maximum permissible values.
2. When the engine is running, you can compare its sound to a four-stroke device.

If violations are noticed in the given parameters or the device has not been fully adjusted, you need to perform the main setup step again. Sometimes actions are performed incorrectly. In this case, the device may fail due to the loss of the correct node settings. In this case, you will have to contact a specialist.

The design of different carburetor models is almost the same, so when working with them you can use the standard scheme. All elements must be removed carefully and then laid out in the order given below so that you can successfully place the items in place after the completion of the repair work.

Owner reviews and prices

Alexander, 37 years old, Moscow region: “I purchased a Lesnik 2512 chainsaw, the price was 5,000 rubles. I've been using it for 3 years now. In the store, the salesman started it up without any problems the first time. It always helps me out at the dacha. I used it to build a bathhouse and remove excess branches and stumps. Friends recommended immediately replacing the chain, which I did. A year later I had to change the tire. After 3 years of operation, problems began to appear: it does not start, does not pull under load, cuts crookedly or idles unstably. The service department fixed everything. Now it works like new again.”

Sergey, 40 years old, Krasnodar: “I bought the Lesnik tool 1.5 years ago. The cost of a chainsaw then was 4,900 rubles. During use, I sawed down dead wood. The total volume of work done is about 20 cubic meters. I did not change the chain or tire. They served for 1 year, then they had to be replaced. Problems often arise with the carburetor. But they are easy to handle; everything is described in detail in the instruction manual. I was able to repair it the first time. It took less than 30 minutes.”

Alexey, 29 years old, Podolsk: “I was looking for a chainsaw to work in the garden. We needed a reliable tool, with basic functions and at a low price. I chose the Lesnik brand. The seller immediately recommended replacing the chain mechanism with a better one.

After about 6 months of intensive work, the tire had to be changed. I figured out the structure and operation of the saw quickly, everything is clearly written in the instructions. I had to adjust the carburetor a couple of times, but there were no problems with that either. Takes a maximum of 40 minutes of time. For the price the equipment is good. Handles stumps, small trunks and branches.”

Reviews

Here are a few reviews left by visitors to our site:

The low performance of the Lesnik 2512 gasoline saw is compensated by its compactness and low vibration, there are no problems with starting in winter, and the cost of servicing the tool is minimal. Over three years of operation, I replaced two chains and a drive sprocket.

Andrey

The Lesnik 3816 engine starts without problems, you can cut a log with a diameter of up to 30 cm in one go. It is difficult to work felling trees in winter - it is very difficult to saw raw and frozen wood, but for housework there is more than enough engine power.

Vladimir